How can you get online without broadband, and what s going on without broadband

The mobile phone opens a monthly Internet traffic package, and then uses a wifi signal transmission software as a hotspot, and then connects the wifi hotspot on your mobile phone with a notebook, so that it is easy to solve temporary or short-term Internet problems.

Mobile phones, data cables, laptops.

Open a night monthly subscription of **5 yuan (idle time**23:00 to 07:00) about 2G traffic.

When the mobile phone is connected to the computer with a data cable, choose the PC to synchronously access the Internet, but the speed of Internet access is not very fast, but it is the simplest and cheapest.

There is wifi with fast internet speed, I guess there should be no wifi signal near you, or it won't be so stupid. There is also a wireless router to buy a neighbor's house to install it can receive the wifi signal, this is not easy to do in the city, in the countryside may not necessarily have a network cable in the neighbor's house.

You can go to get a wireless network card, Unicom Mobile Telecom has, you can consult the specific tariff, shop around, and you will always find a way that suits you and is also within your affordability.

You can buy a wireless network card, there is a package of traffic, there is a package of Internet time, and there is a monthly subscription, etc.

First see if your neighbors near your home have a wireless network, see if there is no wireless password, if you have it, discuss it with a neighbor, let him tell you the wireless password, and use it for a month. You give him dozens of dollars.

Just buy a 3G wireless card and plug it into your laptop.

I wish the New Year better and better.

You also hope to help me complete a task that I am doing, thank you.

Use the **line, but you have to go to handle it first**, otherwise it is too expensive.

Buy a wireless network card, or go to have it. A place to consume wifi.

With 3G Internet access, you can buy a 3G Internet card and do it for 1 year!

Of course, in this age of information, when eye medicine cracks the 2499904991

1. Optical fiber failureFault symptom: optical modem.

The LOS indicator turns red.

Cause 1: Pigtail.

After the head is pulled out, it is contaminated and stained with ash.

Solution: Clean the pigtail head and fiber port with alcohol and plug it back in.

2. The outdoor fiber optic cable is brokenSolution: Call the customer service of your broadband service provider for repair.

3. Network cable failureFault phenomenon: The optical modem indicator is normal, but it cannot access the Internet.

Fault location 1: There is a problem with the network cable from the optical modem to the router.

Possibility 1: The network cable from the modem to the router is incorrect.

Solution: Generally, the multi-port optical modem network cable is connected from LAN 1 to the WAN port of the router.

Generally, the LAN 2 of the multi-port optical modem is generally connected to the IPTV set-top box.

Some local operators may be different).

4. The connected network cable is brokenSolution: Replace the network cable.

Fault location 2: Router to computer.

Possibility 1: The network cable from the router to the computer is connected incorrectly.

Solution: Connect the computer NIC from any LAN port of the router.

5. The wireless SSID connection is incorrectSolution: Connect the correct wireless SSID and enter the correct password.

Fault phenomenon 2: The wireless signal has a good time difference.

Failure Possibility 1: Too far away.

Solution: Add a wireless repeater to expand the wireless signal.

If you are using a Unicom broadband network, it is recommended to check the situation that there is no broadband network in the following ways:

Check whether the modem and the router match, for example, some routers cannot drive the modem's rate.

Check to see if other users around you are also experiencing slow connections.

What is the specific network speed of the customer service number of the broadband home, and whether it matches the actual usage rate.

Link the cat and the computer separately to test whether the network speed is normal, if it is normal, you need to check the router problem.

There is no broadband network, if the broadband is directly plugged into the computer, do you see if there is a cross displayed under the computer? If a cross is displayed, the line is blocked. Do you check if there is a problem with the wiring in the room?

If there is a cat with a router switch, do you see if the lights are on? Make sure that there is no problem at home, it may be an external problem, at this time you have to call the broadband maintenance ** maintenance personnel to help you check the line. If the broadband is directly connected to the router, then you will restart the router and give it a try.

If it still doesn't work, change a router, and it doesn't work to change a router, then you can only call the broadband maintenance personnel to help you deal with it.

When many netizens use mobile phones or computers to surf the Internet, they suddenly find that their broadband does not have a network. Today, a professional perspective will break down the steps for you to find the specific reason why your broadband does not have an Internet. Details are as follows:

1. If the broadband has not expired, first check the optical modem.

If you encounter a flashing red light, it is generally a route failure.

At this time, there is no way to solve it by yourself, and telecom users can call 10,000 to report for repair.

2. If the modem is in good condition, restart the modem first.

After the light flashes normally, you can try to connect directly to the modem.

3. Use a computer to connect a network cable to the modem or a mobile phone to connect the modem to the WiFi signal.

If you can access the Internet normally, it is a network problem.

It may be that the network is unusable due to a problem with the home router.

This step is mainly to exclude whether the router is damaged or not.

4. Check the bottom of the router to confirm whether the router IP address is the same as that of the optical modem.

If the router IP is too.

It will conflict with the address of the modem, resulting in the inability to access the Internet.

5. At this time, if we enter, we will automatically enter the optical modem landing page.

This makes it impossible to set up a route.

6. We need to disconnect the network cable between the WAN port of the router and the modem.

7. Use your mobile phone to connect to the router's wifi signal.

Enter it in your phone's browser.

You can access the router.

8. Find the LAN settings on the router management page.

After the <> settings are successful, restore the network cable.

You can surf the Internet normally.

Organize your thoughts, first determine whether there is a problem with the network cable, and then determine whether there is a conflict between the router and the optical modem. If you found this article helpful, please bookmark it or share it with your family.

1. The router is reset. See if the router and password are reset, generally save the password and there is also a time limit, you can log in again.

2. The line is disconnected. Check whether the relevant wiring of the computer is not plugged in, if the network cable is not disconnected, there is no network.

3. Rebuild broadband connections. You can delete the existing broadband and re-establish a broadband connection, and it is very simple to create a broadband connection.

4. Customer service staff**. If the above methods do not work, you can call the salesperson for ** consultation.

Dear, you can try to operate: for this kind of problem, you first need to confirm whether the MD is normal, if the cat has a normal display signal, restart, and then try to connect whether it can be connected successfully. If you want a router, it is necessary to reset the parameters to confirm the broadband settings, try to connect again after setting the router again, or you can also do a factory reset and set it again.

If the above attempts are unsuccessful, and the MD signal light is still normal, in this case, it is most likely that your network is stopped, and it is likely that you need to renew, at this time, you can check the receipt to see if the network has expired. You can also call broadband customer service** for consultation, through your broadband and bound mobile phone and other owner information, you can know the specific problems of broadband in detail, it is recommended to use the bound mobile phone to call.

Broadband has no network, at this time, of course, call the operator, ask him why there is no broadband network, is it your router problem or broadband network problem, try a few more times, so that the problem can be solved.

You can call ** to go to the manual customer service of the company to which the broadband belongs, and then they will arrange someone to come to check, provided that you are not unable to access the Internet because of arrears.

You can call your carrier's **.

Whether it is the reason for not paying the fee, if not, contact the maintenance staff for repairs.

If I don't have broadband at home, how can I connect to the Internet? Broadband Brother summed up these methods.

In this case, it is very likely that your local network has failed, so there is no network technology, and some ** customer service of their network operators will ask how to solve it.

Summary. Dear, hello, I'm glad for your question, what is going on with broadband without network, help you find the following answers: There may be the following reasons:

1. If the network cable is loose, the two ends of the network cable need to be plugged in tightly. 2. If the device is used for a long time, you can turn off the power of the optical modem, router, computer and other Internet access equipment for a few seconds, and then turn on the power supply and restart. 3. Check whether the network card driver is abnormal, click "My Computer Click (Right-click Attributes) -- Hardware (Device Manager) -- Click on Network Adapter -- Click on the drop-down menu and right-click Properties -- Select Use This Setting (Enable)" to reconnect to the network.

Dear, hello Yanmeng, I'm glad for your question, what's going on with the broadband no network, help you find the following answers: There may be the following reasons: 1. The network cable is loose, and the two ends of the network cable need to be plugged in tightly.

2. If the device is used for a long time, you can turn off the power of the optical modem, router, computer and other Internet access equipment for a few seconds, and then turn on the power supply and restart. 3. Check whether the network card driver is abnormal, click "My computer click (right-click attribute) Hu Zaopei--Hardware (Device Manager)--click on the network adapter--click on the drop-down menu, right-click on the property--select to use this setting (enable)", you can reconnect to the network. 4. If the above methods cannot be restored, it is recommended to contact the local customer service staff.

Broadband network generally refers to a network with a bandwidth of more than 155kbps. Corresponding to Hannian broadband network is narrowband network. The broadband network can be divided into two parts: the broadband backbone network and the broadband access network.

Broadband is not very strictly defined. From a general point of view, it is the bandwidth that can meet the needs of various ** transmission on the network that people can feel, so it is also a dynamic and developing concept.