What kind of engine oil can be used for vehicle maintenance to avoid burning engine oil?

In fact, burning engine oil has little to do with engine oil, but if the engine oil is increased, there is a risk of burning engine oil due to excessive wear between engine parts. Secondly, with high-quality engine oil maintenance, there will be less sludge and can also prevent the occurrence of engine oil burning. The original engine oil has been used once, and the second warranty is to change the GT engine oil at the beginning, and the power and silent performance are better.

Most of the original engine oil is mineral semi-synthetic engine oil, and it is normal for it to start to decline after running two or three thousand kilometers, and the engine protection is even worse.

The engine oil itself has a certain amount of consumption, and excessive consumption is the problem of burning engine oil. There are many factors that affect the burning of engine oil, such as: fuel quality, driving conditions, driving habits, maintenance habits, etc., the following reasons will aggravate the oil consumption and cause the burning of engine oil, so that the vehicle appears:

1. Carbon deposition occurs in the combustion chamber, which makes the gas ring of the piston ring stuck, and the sealing is poor.

2. Oil sludge is generated in the lubrication system, and the oil sludge blocks the oil return hole of the oil ring and weakens the oil scraping performance.

3. Wear occurs between the piston and the cylinder wall.

4. The valve seal is corroded and aging, and the sealing performance fails.

In addition, cars now have crankcase ventilation systems (exhaust valves), which can also exacerbate oil consumption if there is a problem.

Precautionary measures for burning engine oil:

1. Use high-quality engine oil

Engine oil is very easy to corrode and age in a long-term high temperature state, resulting in the oil film becoming thinner, and it is easier to escape to the combustion chamber to participate in combustion, so the use of high-quality engine oil can greatly delay this phenomenon.

2. Pay attention to the cleanliness of the fuel circuit

Carbon deposition is indispensable in the combustion process, and carbon deposition is the root cause of some automobile failures, such as the aging of valve seals, piston wall clearance, etc., which are directly or indirectly related to the formation of carbon deposition, so keeping the fuel oil circuit clean is of great help to prevent burning engine oil, of course, this needs to be done with the help of high-quality fuel additives.

3. With the help of external forces

Considering the relationship between domestic oil products, it is necessary to use high-quality engine oil and (PNF) fuel additives to achieve, which is also the key to solving the problem of burning engine oil without dismantling and repair.

The EA888 third-generation engine no longer burns engine oil, and the oil has been burned for almost ten years, and it should be terminated, hahaha.

Seriously, it is true that you don't burn engine oil, rest assured that you can use the car, there is no best engine oil, only the most suitable, I recommend using 5w-40 fully synthetic engine oil for your car, if the temperature is often very low, use 0w-40, I don't recommend the brand, it's really on the line.

Hope it helps! Hope!

Hello, what kind of engine oil is good for car burning oil, I personally think that it is okay to use ordinary mineral oil, and the viscosity is larger, after all, it is cheap and needs to be added frequently.

Automobile oil burning is generally a problem of the engine, either there is a gap in the combustion chamber or valve oil seal, or the oil and gas separator is broken, if you don't want to overhaul the engine, you can only choose a better quality oil, such as G T magic red, the effect should be much better, will not produce so much carbon deposits, oil and noise and the like. It is also the engine oil I have used with the longest maintenance interval, basically 15,000 kilometers is not a problem, and I have not felt obvious attenuation after driving to 10,000 kilometers.

It is better to use cheap engine oil for car oil, because cheap engine oil is easy to use, and the maintenance cycle time takes about a year.

For this, you are better off choosing a fully synthetic motor oil. Because the lubrication degree of such oil is relatively high, and it is not easy to burn the oil, it can carry out good maintenance of the vehicle engine, and the maintenance cycle is about one year.

There are many factors that affect the burning of engine oil, such as: fuel quality, driving conditions, driving habits, maintenance habits, etc., the above reasons will aggravate the oil consumption and lead to the burning of engine oil, making the vehicle appear:

Hello, it is recommended that the maintenance interval of fully synthetic engine oil be longer.

When burning engine oil in a car, the first thing to see is whether the engine wear is too serious and the maintenance cycle is long.

Ways to prevent it. 1. The use of fully synthetic engine oil will have better wear resistance and adhesion than mineral oil, which can reduce and alleviate the wear on the surface of high-speed rotating parts, thereby reducing the probability of burning engine oil.

2. Appropriately shorten the interval mileage of maintenance;

3. Try to avoid rough driving;

4. Reduce oil consumption as much as possible through the correct running-in method. Because the matching of many parts of the car is not very perfect when it first appears, if you step on the accelerator or tell the driving during the run-in period, the driving simplicity of the car and the transmission of things may cause adverse effects on the mold, and it also has a certain impact on the problem of oil consumption.

Since the engine oil is burning, the first thing to make a fuss about is the oil itself, and choose a synthetic engine oil with strong oxidation resistance and cleaning ability to reduce the impact of sludge and carbon deposits on the internal wear and sealing of the engine. Secondly, choosing an oil with a high flash point can avoid the phenomenon of oil volatilization and burning oil due to high engine temperature.

Driving habits: Avoid prolonged warm-ups and idling. For a hot car for a long time, the engine will inject an excess of fuel to ensure combustion.

The incomplete combustion of the fuel produces a hard carbon black residue. When idle air enters the engine, it decreases, weakens the scouring effect of carbon deposits, and promotes the deposition of carbon deposits. Pay attention to the run-in period of the new car, do not drive violently, avoid emergency braking and acceleration, and reduce the load.

Add Qualified Fuel: Don't try to add Bad Fuel cheaply. Low-quality fuel contains a lot of sulfides, which not only corrode the engine, but also form excessive carbon deposits in the piston ring grooves, etc.

After a period of use, due to oxidation and contamination of the oil, its own quality will decrease, and its wear and corrosion resistance will also be weakened. In addition to changing the oil and oil filter on time, the air air filter needs to be changed in a timely manner. The air filter is blocked, which will lead to poor air intake, reduce the inlet pressure, and form negative pressure, causing the oil to seep into the combustion chamber and cause the oil to burn.

The formation process of burning engine oil in automobiles.

Step 1. The long-term unclean oil circuit of the car leads to the increase of gum impurities and moisture in the oil circuit, and the carbon deposit exceeds the standard due to poor combustion.

Step 2. Excessive carbon deposition leads to a significant decrease in engine condition and greater carbon deposition, and eventually piston ring stagnation and related parts aging.

Step 3. Slight oil burns begin to appear.

Step 4. Because burning engine oil produces greater carbon deposits in the cavity.

Step 6. The trunk went from having one liter of oil ready to being ready for two or three liters of oil at any time.

Step 7. The overhaul was too expensive, and it was delayed, until in the end, the engine was overhauled with a burst cylinder.

In fact, as long as the daily maintenance is in place, no engine will burn oil prematurely, or even hundreds of thousands of kilometers without burning oil.

There are two other points to pay attention to: avoid buying fake engine oil, and maintain and change the engine oil on time. As long as you do these two things, you will be basically fine.

There are many reasons for burning engine oil, such as volatile engine oil and engine running-in skin sneering, which may cause engine oil to burn, but these are normal phenomena. Those abnormal oil losses, such as oil spilling into the combustion chamber, should be reduced and avoided by strengthening the daily maintenance of the car. It is recommended that car owners choose better quality engine oil, which has better stability, maintains appropriate viscosity at high temperature and high speed of the engine, ensures effective sealing, and reduces oil consumption.

Second, the owner should develop good inspection habits, such as doing some daily maintenance according to different use conditions, long service life and mileage, or often used in harsh conditions of the vehicle, the frequency of inspection should be increased accordingly. The third is to be able to achieve regular maintenance of the vehicle, under normal circumstances, the maintenance cycle is 5000 kilometers, and the oil and oil filter should be replaced at the same time for each maintenance. The condition of burning engine oil generally appears in old cars, and the situation of burning engine oil in new cars is relatively rare, and the condition of burning engine oil generally appears in old cars, because the valve oil seal is aging and will wear out seriously after long-term use, and it has been unable to achieve a good sealing effect.

There are several ways to check whether the oil has entered the combustion chamber: one is to start the car in the early morning, because the engine has not been running for a long time, and the oil will flow into the cylinder through the gap of the valve oil seal under the action of gravity. Start the engine at this time, if there is a problem of burning oil, the oil in the cylinder will burn under high temperature and high pressure to produce a large amount of blue smoke.

If the seal between the engine piston ring and the cylinder wall is not tight, the piston ring moves up and down the frequency when the vehicle accelerates sharply, and the residual lubricating oil on the cylinder wall is easy to be carried into the combustion chamber by the piston ring and cause the engine oil to burn. So you can choose to step on the accelerator in place to see if there is blue smoke discharged. If there is blue smoke coming out of not only the exhaust pipe, but also the oil port from time to time, it means that the oil burning situation is quite serious, and the vehicle needs to be overhauled.

If you don't pay attention to it, and wait until the engine pressure is too low and the engine alarms, it will cause a lot of loss to the engine.

Hope it helps.

Regular maintenance and careful use of the car can achieve a good service life, engine lubricating oil, filter, transmission gear oil, rear axle differential gear oil, gasoline filter, air filter are all important maintenance parts

For automobiles, it is normal to burn engine oil, but if it burns too much, it is very abnormal. The following is to give you an introduction to how to avoid burning engine oil in the car, welcome to read!

1. Use engine oil that meets the technical requirements of the vehicle. Many car owners never read the vehicle manual, and they don't know what quality and viscosity grade of engine oil their vehicles are used after driving for a few years, and there is a lot of arbitrariness in the use of engine oil. When using engine oil, one is to pay attention to the quality index, and the other is to pay attention to the viscosity index.

Each product of Eagle Flag lubricants is described in detail, and car owners can choose according to the situation of their own car, and the right car is the best.

2. Avoid recurring. Sharp acceleration and long ultra-high speeds. When the engine rotates at ultra-high speed, it is easy to break the lubricating oil film, resulting in poor lubrication and dry grinding of the rotating part, when it becomes a regular operation, it will make the engine wear abnormal and the lead appears to burn the oil, therefore, in addition to choosing the right oil, Eagle Flag lubricating oil reminds the owner to maintain good driving habits, and maintaining economic speed is also a good way to prevent the phenomenon of burning engine oil.

3. The oil must meet the specifications when filling. When the oil filling volume exceeds the center line, the repairman should be asked to pump out the excess oil, in addition, the oil volume should be observed before the next day.

4. If you find that the engine oil is burned, go to the maintenance station for inspection as soon as possible. If it is due to engine failure (such as poor piston ring sealing, valve oil seal leakage, cylinder gasket leakage, etc.), you should go to the maintenance station as soon as possible to check and repair the fault as soon as possible.

Why do cars burn engine oil?

1. Normal wear and tear. In the case of high engine temperature, oxidation (leakage), etc., there must be consumption, and the general consumption standard is 1% of gasoline, and the higher the age of the vehicle, the higher the consumption.

2. Abnormal wear and tear. The quality of the engine and engine oil will cause abnormal oil burning.

How can you tell if you burn engine oil?

1. Blue smoke from automobile exhaust is a phenomenon of burning engine oil.

2. In the case of no oil leakage, the oil decreases very quickly for no reason.

3. The burning of engine oil caused by adding more engine oil is rare, but it also exists.

4. Whether the power of the car decreases (the power decreases after the compression ratio decreases), etc., can also be judged whether the engine oil is burned.

The hazards of burning engine oil in automobiles

If the engine has an oil burning fault, this will not only lead to poor lubrication of the engine due to lack of oil, but also prematurely damage the oxygen sensor, block the three-way catalytic converter, and lead to a rapid increase in carbon deposition in the combustion chamber, weak acceleration, increased fuel consumption, unstable idling, excessive exhaust emissions and other adverse consequences.

What kind of engine oil is good for burning engine oil for automobiles, and the maintenance interval is long?

Hello, the car engine burns engine oil, this is the need to use high viscosity oil. First, it is recommended to use a 5w40 or 10w40 oil. Second, this related engine oil depends on the model and brand.

If the oil leakage is not serious, you can add some internal engine repair agent to the hole. Third, the so-called special engine oil on the market that can treat the burning of engine oil, this is normal with no practical effect, as long as the first engine oil is added.