How do you eliminate the human voice in the dubbing production?

1. Adobe Audition is a professional audio and mixing software designed for audio and professional professionals working in photo studios, broadcast equipment, and post-production equipment, providing advanced audio mixing, control, and effects processing capabilities. First, open AU and hold down Ctrl+O to import.

2. After importing, two files will be displayed in the file window, one is audio and the other is **, here right-click the audio file and select Insert into Multitrack Mix - Create New Multitrack Mix.

<>4. Then you need to have a good name for the mixing project, find out the location of the file, and click OK after the file is stored.

5. After the new creation is completed, drag the **file in the file window to the top of track 1, and the drag position should not exceed the position marked with time, here you need to click the left mouse button ** to drag to the left, and align the time with the start time of the audio.

<>7. Left mouse click effect - stereo image - center channel extraction.

8. Select Vocal Removal in the Combination Effect Preset drop-down menu, select male or female voice for the extracted frequency range, and then adjust the slider of the right middle channel level and side channel level, and then the vocal removal is completed.

Below, is the operation method of eliminating the original sound extraction accompaniment, come and see if it can help you solve the problem!

Note! This reminds everyone:First of all, the accompaniment of the silenced version is definitely not as good as the original version, and some original sounds may still be heard vaguely;

And the bass in the low frequency section is also eliminated a little.

Procedure to remove human voices1. Double-click to open the software, and click "Add File" to add the audio files that need to be processed;

<>3. Here, you can choose the voice that needs to be eliminated, from low to high; The diagram below illustrates the following: the elimination of vocals from 1 Hz to 9000 Hz; Finally, select the intensity of elimination, and click "OK" to proceed to the next step;

<>5. Finally, click "Export" in the upper right corner;

6. Then, you can set the audio format and export location here, and finally click "OK".

7. After the file is exported successfully, click "Go to export file location" to quickly find the audio file!

In fact, it is very simple, you can use the cooledit software, you can go down to the sky or Dort, and enter the software interface: First of all, switch the audio bar you want to denoise reduction to the bottom of the window (double click), but then zoom in on the audio display, find the simple noise position, use the mouse tora to select the part you want to sample, click on the effect above, there is the option of noise reduction effect, use the sample denoiser, sample the noise, click OK, select the audio bar as a whole, Click on the Effect - Sample Noise Canceler again, click OK directly - and you're done!

Note, when sampling noise, do not sample the recording material and the sound existing in the material, otherwise it will be a great damage to the audio material, you must understand that even if you use the sample noise reduction effect, it is not to completely remove the noise, but to block a certain frequency band on the basis of the audio, which will more or less lose your material, it is recommended not to record in a noisy environment before recording.

The method of eliminating vocals from dubbing clips is as follows:1. Enter the clipping interface and click Start Creation.

<>3. Enter the interface to infiltrate Jingfeng, and the human voice can be eliminated.

Tools:

Computer, format factory software.

<>3, click "Add Files", enter the "Add Files" folder, find the path of the MP4 file you want, and select this file.

Once you've imported an audio clip, you can drag and drop it onto the right track with the mouse, or double-click on the audio file to add it to the track.

When all this work is done, then the key part will come, apply**Remove the vocal software's built-in effect to remove the voice, leaving only the background**. Select the effect — Stereo —

Dissected the middle channel, and entered the window to remove the voice and Peichun. Select Vocal for preset effects

As for the other parameters, you can leave them as default, and you can also try to debug them, but one thing to keep in mind is to keep the sound quality as high as possible, and not to distort it. Click OK to apply the effect, and you need to wait a little while to apply the effect.

1.Click the Start menu, and then click the [Format Factory] menu item to open the Format Factory software.

2.Click the [Convert to WMV] button.

3.The configuration panel is displayed, and then click the Add File button.

4.In the dialog box that opens, click on the file you want to convert, here I select "Tutorial 1". mp4" and click the [Open] button.

5.Click the [Output Configuration] button to configure it.

6.You can see that the value to the left of "Sound off" under "Configuration" and "Audio Stream" is "No", click the value on the right, select "Yes" from the drop-down list, and then click the [OK] button.

7.Click the [OK] button to complete the parameter setting.

8.Click the [Click Start] button to convert.

9.When the task is complete, right-click on it, click and select [Open Output Folder].

It's only possible to remove them all, it's impossible to remove the ** to keep the sound effect, or think of another way to stop wasting time on this!

Turn on the audio, inside there is noise removal, you can set it.