How to prevent rust on casters, how to prevent rust on steel?

Water and oxygen are what make casters susceptible to rust. Only when the oxygen in the air is dissolved in the water, the chemical reaction between the oxygen and the caster in the watery environment will produce something called oxidized caster, which is caster rust. Industrial caster rust is a brownish-red substance, it is not as hard as casters and can come off easily.

When a caster is completely rusted, it can increase in size by a factor of 8. If the caster rust is not removed, the spongy caster rust is particularly easy to absorb water, and the caster will rust faster.

Knowing the secret of caster rust, we can effectively prevent caster rust. Caers in wet places are more likely to rust than those in dry places because casters in wet places are more likely to come into contact with water than those in dry places. Painted caster products are not easy to rust because the paint plays a role in isolating air and water.

If you want to reduce the rust of the casters, you can start from the conclusion of the experiment and arbitrarily cut off one of the conditions for rust.

If it is painted, it cuts off the contact between the casters and the air. Drying some caster products such as kitchen knives and putting them in a dry place after use can cut off the contact between casters and water, thereby preventing rust of caster products.

In a humid locality, casters are simpler to rust than in a boring locality, due to the fact that in a humid locality, casters are simpler to touch with water. The finished product of the painted caster is not simply rusty because the paint has the effect of blocking air and water, therefore, if you want to reduce the rust of the caster, you should block the rust in the meantime. It can be painted on the casters to block the touch between the casters and the air, and the finished casters can be dried and placed in a boring place after use, so as to block the contact between the casters and the water, and then avoid the rust of the finished casters.

Iron products are prone to rust and require care and care. If it is often exposed to wind and rain, it will often rust seriously and affect the service life. In fact, you can use tiger head brand lubricating oil to wipe and soak it, in addition, do not wipe it too clean, the kind that maintains a layer of oil stains, which can play the role of a protective film and not make the iron products rust.

1. If some equipment and instruments need to move frequently, they must be installed on the four corners and the universal wheel seat in the middle at the same time to bear the load evenly.

2. To place the equipment smoothly, if the ground is uneven, it is necessary to achieve balance by adjusting the high temperature resistance at the bottom to prevent the equipment from tilting and causing uneven force on the high-temperature wheel and easy to damage.

3. When moving equipment with high temperature resistance, the objects on the ground should be cleared, and the objects should be moved slowly to prevent damage to the high temperature resistance and ground caused by overload and rapid movement, and it is strictly forbidden to use strong inertia to move the equipment and instruments.

High temperature casters in the use of try to avoid damage problems, to maintain balance on the ground, do not tilt, that will be serious damage, with an impact on the performance of the product, in any case when using an object should be cautious, but also pay attention to safety, of course, it is also related to the installation of the product, pay attention to the same series of products and suitable configuration of the same thing to use.

The biggest difference between universal wheels and directional wheels is that the structure of universal wheels allows for horizontal 360 degree rotation. In the process of moving goods, it is more convenient and flexible. There are many materials used to make universal wheels, and the most common materials are:

Nylon, polyurethane, rubber, cast iron and other materials. Due to the flexibility of the universal casters, they can be seen on many occasions. The following is an introduction to the maintenance method of industrial universal wheels:

1) Visually inspect the wear and tear of industrial casters. The anti-tangle cover can cover the rope and other sundries, the rope can not be too loose or too tight, and the broken casters should be replaced in time to avoid unstable rotation. After checking and replacing the wheels, make sure that the axle is tightened with a lock gasket and nut.

2) If the active steering is too loose, it must be replaced immediately. If the center rivet of the industrial caster is fixed by a nut, it must be ensured that it is firmly locked. If the movable steering cannot rotate freely, the ball should be checked for corrosion or dirt.

If it is equipped with fixed casters, it must be ensured that the caster bracket is not bent. (3) It is necessary to lubricate the industrial casters regularly, so that the wheels and movable bearings can be used for a long time. Lubrication is normally applied every six months.

The wheels should be lubricated after monthly cleaning.

The cabinet at home is hinged.

Chains, drawers, slides and other hardware will rust when they grow this is an inevitable phenomenon

There is no hardware accessories that will never rust, just the length of time to rust, to put it bluntly, it is a problem of product quality, so when buying furniture, many consumers will ignore the problem of hardware accessories, but small problems can not be underestimated, hardware accessories are also high and low, and there are more brands.

Wipe with a damp cloth or damp cloth (use a soft, damp sponge or cloth, do not use a cloth with a rough surface) dampened with neutral dish soap or detergent, and finally wipe off the water stains. Wipe the surface clean immediately after using the detergent. Do not leave the detergent on the surface of the product.

Generally, it is not easy to rust, and the surface of the degree of branding will not fall off, and it is not good to be in contact with acidity.

There is a tube of grease at home for the derusting of hinges and hinges.

Macalon and other well-known hinge products use tiger heads.

The hinge grease of ダオホトルベ or Kluber is colorless and transparent, and has good adhesion and durability. There is a 130-gram tube package in the leopard, which is also suitable for sliding door slides, etc. Apply grease directly to the hinge and it will slowly penetrate into the hinge.

It is not advisable to use lubricating oil or ordinary butter, which is easy to lose or freeze at low temperature, and will volatilize harmful odors. Vegetable oil quickly rancid, develops odors and loses its lubricating effect.

Stainless steel handles and other stainless steel hardware can be wiped with a brightening detergent to add brightness.

Hinges, lifting wheels, casters and other moving parts may reduce their performance due to dust adhesion during long-term movement, about every six months.

One or two drops of lube will keep it smooth.

When the cylinder does not rotate flexibly, scrape a small amount of black powder from the pencil lead and gently blow it into the keyhole. This is because the graphite component in it is a good solid lubricant. Do not drip lubricating oil as this will make it easier for dust to stick.

Pay special attention to the direction of the rotation and stretching of the handle, and avoid using dead force. In particular, children should be taught not to dangle from the doorknob, which is both dangerous and potentially damaging to the inner door.

Commonly used methods to prevent iron rusting are:

1) Forming alloys to change the internal structure of iron For example, adding chromium, nickel and other metals to ordinary steel to make stainless steel greatly increases the rust resistance of steel products

2) Covering the surface of iron products with a protective layer is a common and important way to prevent rust of iron products According to the different components of the protective layer, it can be divided into the following types:

a. Coating the surface of iron products with mineral oil, paint or firing enamel, spraying, etc. The machine is often coated with mineral oil, etc

b Plating a layer of metal that is not easy to rust by electroplating, hot plating and other methods on the surface of steel, such as zinc, tin, chromium, nickel, etc

c. Use chemical methods to generate a dense and stable oxide film on the surface of iron products to prevent rust of iron products

3) Keeping the surface of iron products clean and dry is also a good way to prevent iron products from rusting

If none of the above helps you, then you can try wrapping it in plastic film to see how it works.

We hope you find the following precautions helpful:

1.Oil rust prevention, this method is too greasy and polluting, not only not beautiful, but also the rust prevention effect is not ideal. The anti-rust method of unclean oil is less effective than desiccant and traditional paper packaging, and the cost is higher.

2.Anti-rust paper: Anti-rust paper is an economical and environmentally friendly anti-rust packaging material, which is used for the packaging, transportation and storage of iron or non-metallic parts with small volume; The anti-rust effect is relatively fast and simple to use.

It has the best moisture-proof, anti-rust and anti-corrosion functions. It also has the characteristics of long anti-rust time, safe use, beautiful packaging and low cost, and has been widely used at home and abroad, becoming an indispensable anti-rust material for industrial products and parts packaging, and is very suitable for anti-rust between processes and warehousing in the machining industry.

3.Anti-rust film anti-rust: (characteristics are the same as above).

Adopt paint protection or wax spraying to prevent rust: Wax spraying is to spray a layer of wax protective film on the metal surface to isolate the metal surface from moisture, so as to achieve the purpose of rust prevention. This method is simple to use, needs to be cleaned with hot water when removed, and is a safe and environmentally friendly disposable anti-rust material.

In addition to the above methods, the iron storage environment should be kept dry, and the humidity should not be higher than 50%.

The casters at the bottom of the cabinet are available in a variety of styles:

1. Directional wheels (with and without brakes).

2. Universal wheels (with and without brakes).

Brake the brakes when placed normally to prevent the cabinet from moving.