Does the memory function of the original seat of the new Lingyu car need a gauge and a comfortable c

In the future, according to the number you save, such as 1, that's where you save. It can only be used in the case of parking. Reminder,Don't let go of the set press,Press the number memory function is used like this.,There are 123 is 3 memories.,Some are only 1 and 2.,If it's just 1, it's simpler.。

The memories of all the cars I have touched are used like this, hehe, the Passat has not been used. There are a few buttons in the seat memory, 3 memory positions are 4 buttons, 2 have 3 buttons, Mercedes-Benz is on the door, but many cars are on the left hand side under the driver's seat, the front one is the setting, the back few are the memory storage position, if you open yourself, the first group is set to your own suitable position (1), the last group is set to the position of the most backward (3), press 3 when getting off, the position is convenient to run up and down at the end, and press 1 after getting on the car is your most suitable position. If there is a seat memory, it is used like this, if the rearview mirror of the car is also electric, if the car is good, it is linked, and it is remembered and adjusted together.

All car operations are the same: memory operation: adjust the position--- memory (set) + memory key (1 2 3) - Didi (prompt sound) is OK.

Operation: In the p n position, directly press the memory button (1 2 3), and the seat will automatically adjust to the preset position. Failure of operation while driving.

I want the tread to be a little wider, and the tires want to be one size bigger.

You definitely need a comfortable computer.

1. Adjust the position you think is most comfortable to drive.

2. Press the M button once, and the seat position will be saved in the corresponding number key.

3. When you want the same position in the future, you just need to press and hold the corresponding number button until the seat is adjusted.

1. Adjust the position you think is most comfortable to drive.

2. Press the M button once, and after pressing the number key, your preferred seat position will be saved in the corresponding number key.

1. Setup steps:

a) Memorize the position of the driver's seat and exterior mirrors during normal driving.

1) Turn the ignition on;

2) Turn "Memory Off" on the left side of the driver's seat"The red button is pressed down;

3) Adjust the driver's seat and exterior mirrors to the most suitable position, and press down a memory button on the left side of the driver's seat (built.

Start with the first button) and hold until you hear a "knock" sound to indicate that the setup is complete. (Repeat this step.)

You can set two other memory buttons);

4) Once the memory button on the driver's seat is set, immediately disconnect the ignition switch and pull out the ignition key, within 5 seconds.

Press and hold the open button on the key until you hear the "dong" beep and the key's memory is set (repeat 3

And 4 steps can be set to remember the position in the other key, the spare key can not be set without remote control function).

b) Set and memorize the pre-set position of the exterior mirrors when reversing.

1) After the memory button on the driver's seat is set, switch the exterior mirror adjustment knob to the right exterior mirror adjustment.

Location; 2) Put the gear lever into the reverse gear position and adjust the position of the right exterior mirror (so that the driver can see the car from inside the car when reversing.)

rear side and ground conditions);

3) Press down a certain memory button on the left side of the driver's seat and hold until you hear the prompt sound of "dong" indicating that the setting is complete, and the set position is remembered by the corresponding memory button.

Note: When calling the pre-adjusted reversing exterior mirror position, the exterior mirror adjustment knob should first switch to the right exterior mirror.

adjust the position).

2. Call the pre-set memory position.

1) When the driver's door is not closed, press the memory button that has been set on the driver's seat, the driver.

The seats and exterior mirrors automatically run to a pre-set position;

2) With the driver's door closed, press and hold the memory button set on the driver's seat until driving.

The driver's seat and exterior mirrors automatically adjust to the pre-set position;

3) With the driver's door closed, press the open button of the remote control key to open the driver's side door and drive.

The seat automatically adjusts to the position that this key remembers (two master keys can remember two positions).

Note: Only when the ignition is disconnected and "memory off" is added"The red switch can be pressed down before the pre-setting can be called.

Good memory location).

Once adjusted, press M to save the action you just did to 1 or 2

If you are messed up by someone else, press 1 or 2 to return to the settings you initially adjusted.

Once you've adjusted the position you think is most comfortable to drive, press the M button once, and after pressing the number keys, your preferred seat position will be saved in the corresponding number keys. Later, when you want the same position, you just have to press and hold the corresponding number button until the seat is adjusted.

Adjust the seat position first, push the level switch forward, move the seat forward, push the level switch backward, and move the seat backward.

Press and hold the end of the seat adjustment level switch, lift up, seat up, press down, seat down, seat down.

Push and pull the top of the vertical switch of the seat forward and backward to adjust the tilt angle of the seat back.

Once you have adjusted your seat position, press the SET button on the left side of your seat.

To use the seat memory function in the future, you only need to find your own memory button, and press and hold the number button to return to the set position.

Ask the sales consultant to go, how easy.

Everyone needs to adjust the driver's seat to the best driving position according to their height and body type.

If you have several people in your home driving, you can store everyone's seat position according to each person's different situation.

This way, when the driver is replaced, there is no need to readjust the seat.

Some cars can remember n personal information, such as the size and height of your family of three. You first adjust the height, the distance between the front and back, etc., and memorize it as a (or number 1). When your family is driving, they adjust the distance and memorize it as B (or No. 2), and the next time you drive again, press A directly, and the seat will be adjusted directly to your driving state.

That is to say, after setting the front and rear positions, after the tilt angle is set, press the button, and the position may be adjusted when others are driving, and pressing the key will automatically become the position you set.

For how to set it up, look at the manual.

The steps are as follows: 1. The whole car is energized;

2.Adjust the seat to a position that feels comfortable for you;

3.Press the M button to activate the seat memory function;

4.Then press any of the number keys to memorize the seat position, and hear a "beep" The relevant display on the dashboard indicates that the memory is good;

5.The next time you want to use it, press and hold the number button to set it, and the seat will automatically adjust to the position you set.

There are 3 circular keys on the outside of the seat, which are marked as "1", "2" and "M" buttons.

1.To use power seat memory, you first need to remember the seat position. Turn on the ignition switch, adjust the seat to the appropriate position, press the M button within 4 seconds, press the 1 or 2 button, and hear an audible signal, indicating that the position of the seat has been memorized.

2.When the ignition switch is turned on or the engine is running, short press the 1 or 2 button to use the corresponding memory position, and hear an audible signal to indicate that the seat has been adjusted according to the memory position.

Hello friends, power seat memory setting: after the ignition starts, adjust the seat to a comfortable state and the position you want to preset; Press the SET button on the door panel, hold for about 3 seconds, at this time the SET light is on, select storage 1 or 2, hear the ticking sound, and the seat position will be remembered; When you drive again, just press the set 1 or 2. Electric seat memory is to combine the electric seat with the on-board computer, increase the memory function of the seat, and realize intelligent management of the information parameters in the seat.

Electric seat memory setting method: after the ignition starts, the car can be in the state of operation, and then adjust the seat to your own comfort or the position you want to preset; Press the SET button on the door panel and hold for about 3 seconds, at this time the SET light will turn on, select storage position 1 or 2, and the seat position will be remembered when you hear a tick. The next time you drive, you only need to press 1 or 2 to automatically adjust the seat to suit you, so you don't have to manually adjust the front and rear and height!

In some mid-to-high-end models, the main driver's seat generally has a seat memory function, and this function key is very convenient and practical. Hope mine is helpful to you.

Turn on the ignition switch without starting the engine; Then adjust the seat, steering wheel, and rearview mirror to your satisfactory position; Then press the "set" button, then you will find that the indicator light on the "set" button is lit; If you press the "1" button or "2" button again, the current seat, steering wheel and mirror position will be stored on the "1" button or "2" button, and the indicator light on the "set" button will turn off, indicating that the storage is successful!

How do I use the seat position memory function?

The seat memory function means that the electric seat and the on-board computer can be combined to increase the memory function of the seat and realize the intelligent management of the information parameters in the seat. The memory function solves the problem of frequent driver change and readjustment.

By combining the power seat with the on-board computer, the memory function of the seat can be increased and the information parameters of the seat can be intelligently managed. For example, if the former adjusts the seat state and the latter is readjusted to ensure comfort, the computer will store and save the former's adjustment parameters, and when the former sits again, he only needs to press a button to easily obtain the previously stored settings suitable for personal needs. There are generally two to four memory group numbers.

The same car does not necessarily hurt to drive alone, different people, tall, short, fat and thin, different driving habits, so the adjustment of the seat will be different, and the memory function solves the problem of frequent change of driver and waiting for new adjustment.

After the driver gets into the car, he or she will adjust the height of the car seat, the distance between the front and back, and the angle of the reclining of the back seat according to the characteristics of his body. If there are a lot of people driving in this car, it will be more troublesome for each driver to readjust when he gets into the car, so after a driver adjusts it, he can let the computer remember the current seat situation, set a shortcut key, and next time he gets in the car, although the seat has been adjusted by others. But if you press that shortcut, it will automatically adjust to the position you set.

It is recommended to go to the 4S store for computer matching to solve the problem of computer matching and avoid unnecessary losses in independent matching.

Model introduction of the Passat car: Shanghai Volkswagen Passat B5 LW was introduced at the end of 1999. Based on the lengthened B5PL45+ platform, both have a 100mm (longer wheelbase and longer length than the standard B5 Passat.

A powerful liter (TDI) diesel engine is prepared with a solution of 136 ps (100 kW) added.

The acceleration time of the Volkswagen Passat car could be faster. Thanks to good throttle response and plenty of low-end torque, the R-Line's liters feel fast at the residential street level, but on the highway, the 174-horsepower engine struggles to get the 3,354-pound sedan to accelerate.

1. Sit in the driver's seat of the vehicle;

2. Ignition key ignition core pulling;

3. Close the door;

4. Press and hold the door lock and lock button; (car lock button remote control).

5. The door lock is closed, the lock position is maintained (the meaning is pressed directly), insert and pull out the ignition start key, and the two should turn the lock cylinder 6, and the third insertion ignition start key key retains the ignition core.

7. Loosen the door lock and listen to three rings, the sound feedback indicates that the transmitter is programmed to start, 8, and press the remote control lock lock button (; Press the two pieces) and keep it for 12s to listen to two beeps to indicate that the remote control programming has worked.

9, its transmitter (4) repeat step ie.

10. Ignition start key ignition core pull out the program.

Generally, the position and angle of the seat are adjusted first, and then the M button is pressed, and then the number button is long pressed to map the settings to the corresponding key. At that time, the seat will automatically adjust to the original personal position by pressing the corresponding button. Different keys can correspond to different setting schemes, and there are generally 2-3 groups to choose from.

Don't you think that function is useless?

For example, if you are Mr. Chen, and store it as the No. 1 seat after adjusting the seat, your wife is Miss Wang, and your wife will adjust the seat position to No. 2, and you don't need to adjust the seat yourself when you get in the car, you can use No. 1 when you drive it yourself, and your wife can use No. 2 when you drive it, and others can set No. 3 and No. 4.

That is to say, the car seat has the ability to remember the position you set, and you can easily press a memory button to return to your own suitable driving position.