How to look at the steering wheel when the second car is reversed into the warehouse?

Summary: The specific methods are as follows:1. Drive the vehicle to the reversing and warehousing test area, keep the distance between the body and the library side line about one meter, and stop after the front wheel crosses the yellow line.

2. Step on the clutch, hang the reverse gear, and reverse slowly.

3. When the lower edge of the left rearview mirror coincides with the yellow line, hit the steering wheel to the right and continue to reverse.

4. Look at the right rearview mirror, observe the distance between the rear wheel and the right corner, if the rear wheel is about 30 cm away from the right corner, you do not need to correct the direction, continue to reverse the car.

5. If the angle between the wheel and the library is less than 30 cm, you can turn the steering wheel a little back to keep a distance of about 30 cm.

6. Pay attention to the rearview mirror, and quickly return to the steering wheel when the body is parallel to the library sideline.

7. Observe the left rearview mirror and stop when the lower edge of the rearview mirror coincides with the yellow line.

8. The inverted left library is the same as the right library, but it is replaced with a left steering wheel.

The highlights of the second reversing and warehousing method are as follows:

1. When the lower edge of the left rearview mirror coincides with the starting line, it quickly fills the direction to the right;

2. Observe that in the right rearview mirror, when the angle between the body and the library is greater than or equal to 30cm, the steering wheel does not move and continues to fall back;

3. If the angle line between the body and the library is less than 30cm, the steering wheel will turn back to the left until it reaches a suitable distance, and continue to fall backwards;

4. When the body is parallel to the library line, return to the positive direction, and stop when the lower edge of the left rearview mirror coincides with the library corner line.

1. Reversing to see the edge of the garage area, completely visible under the left rearview mirror frame, began to kill the steering wheel.

2. Hit the steering wheel on which side to reverse, and then look at the exterior mirror, look at the left rearview mirror, and look at the right rearview mirror on the right rearview mirror.

3. The car will enter the garage, and when the body is fast parallel to the library line, it will quickly return to the steering wheel.

4. Look at the left rearview mirror frame, touch the reservoir line, beat the steering wheel to death, and observe the rearview mirror. The left inverted library looks at the left mirror, and the right inverted library looks at the right rearview mirror.

5, 30 cm away from the corner of the library, back to the direction of half a circle, and then hit back to the direction, if you stop in the library and find that one side is big and one is small, which side of the big steering wheel will be played on which side, and the steering wheel will be corrected back to the positive steering wheel.

1. Adjust the seat and rearview mirror, and fasten the seat belt, then hang the car in reverse gear, release the parking brake lever, the car starts and reverses at idle speed, and the driver observes the garage through the right rear window.

2. When you see that the black edge of the right rear window is aligned with the right line of the garage, turn the steering wheel to the right at a constant speed to the limit position.

3. After the car enters the garage, the driver looks back at the left side of the rearview mirror, and when he sees the entire garage line appearing on the left side, he immediately returns to the steering wheel.

4. When you see the level of the left door handle and the bottom line of the garage from the left side mirror, stop immediately.

5. Put the car in reverse gear, keep the left turning limit of the steering wheel unchanged, and reverse.

6. The driver should pay attention to the left rearview mirror and correct the direction to make the rear car back to storage.

7. After the car enters the garage, the driver should pay attention to the right rearview mirror. When he sees the entire garage on the right, he should immediately return to the steering wheel.

8. Then the driver turned his gaze to the left rearview mirror, and when he saw that the left door handle was flush with the bottom line of the garage, he stopped.

1. When the left is out of the warehouse, the reflector is used as a reference, and the distance from the lower edge of the mirror to the white line is two fingers wide, stop, such as the distance 1; You can also see the distance from the car to the left side of the car from the mirror, such as distance 2.

2. Then when the place of attention of the sign is reached, the mirror is still used as a reference, and the lower edge of the mirror coincides with the white line, and the left is killed.

3. After filling, the attention shifts to the reflector, while looking at the mirror, continue to reverse until you see the appearance of a corner, and when you see the distance from the angle to the handle from the reflector to 30cm, go back and continue to pour.

4. After returning a circle, the attention shifts to the lower edge of the mirror, pay attention to the overlap between the angle and the lower edge of the mirror, that is, when the angle disappears, the left is killed.

6. After the last stop, the reloading is completed.

It is not difficult to say that it is easy to learn, and it is necessary to have a trick.

The new traffic regulations require that the internal road test of subject 2 be changed to "five compulsory tests", and the content of the five tests can be completed in one test. Among them, the inverted warehouse is commonly known as "inverted pile" and "inverted rod" is a particularly important item, and then the term "inverted pile" and "inverted rod" will be changed to "inverted line". Because there are no 6 poles in the corners of the exam, it has been changed to a "convex" line like a parking space.

Reversing and warehousing operation requirements: During the test, the vehicle shall not stop on the way to enter and retreat. Reverse into the garage from the control line (body pressure control line) at one end of the road to park, then go out of the garage and drive through the control line at the other end and reverse into the garage to park, and finally go forward and drive out of the garage.

Scoring criteria for reversing and warehousing: those who do not follow the prescribed route and sequence are unqualified; If the body is out of the line, it is unqualified; If the warehouse is not entered, it is unqualified; Those who stop halfway are not qualified.

The purpose of the test is to test the ability of the motor vehicle driver to control the vehicle to complete the side displacement, reverse the vehicle into the garage and correctly judge the position of the body space.

How-to tips. 1.When you start reversing, you will rotate the steering wheel to the right and a half, and observe the wheel above the right rearview mirror, which should be about 40 cm away from the right line of the garage, so as to ensure that the right side will not press the line when reversing into the garage.

2.Look in the left mirror, and when you can see the left line of the garage, immediately turn the steering wheel half a circle to the left and continue to reverse.

3.If you look at the left and right mirrors, there are solid garage lines on both sides, and when the distance is about the same, immediately turn the steering wheel back to the left and continue to reverse.

4.Look in the left rearview mirror until it completely covers the front of the garage and brake.

5.Don't rush to turn left when moving forward, and pay attention to the left side mirror when it coincides with the vertical line on the side, and then turn the steering wheel to the left and a half.

6.The precautions for storage on the left are the same as those on the right, except that the rearview mirrors to be observed are in reverse order.

Section 2 reversing into the garage highlights to instruct the steps of the sedan steering wheel are as follows:

1. When the lower edge of the left rearview mirror coincides with the starting line, quickly move to the right to Heng Min.

2. When the angle line between the body and the library is greater than or equal to 30cm, the steering wheel does not move and continues to fall backwards.

3. When the angle line between the body and the library is less than 30cm, the steering wheel turns back to the left until it reaches a suitable distance, and then continues to fall backwards.

4. When the body is parallel to the library line, it is necessary to stop when the lower edge of the left rearview mirror coincides with the library corner line.

Section 2 reversing into the garage highlights of the steering wheel are as follows:

1. The first one is to hit the steering wheel full of points, the steering wheel of this point is to hit the steering wheel to the end, and if you turn the right library, you will hit the steering wheel to the right to the end; If you turn the left bank, you will hit the steering wheel to the left; The location of the point is when the lower edge of the left mirror coincides with the garage sideline.

2. The second is the steering wheel back to half a circle, the body in the process of gradually retreating, observe the position relationship between the body and the library angle in the rearview mirror, almost 30 cm, the steering wheel will be opened back half a circle; Remember, you must see in the rearview mirror that the body is 30 centimeters different from the corner of the library to return to half a circle.

3. The third is the steering wheel back to the right point, the mark of this return to the right point is the rearview mirror in the body and the distance between the two sides of the side line hidden stove is equal, at this time, the body will be in the center of the retreat, just in the middle of the garage, in the process of the body retreat, which side of the width to which side of the steering wheel, the distance correction.

4. The fourth is the parking point, when the body is centered and retreats, in order to ensure that the rear of the car can not touch the rear side line, it is necessary to park at the parking point, and this parking point is determined according to the lower edge of the left rearview mirror and the garage side line, at this time the steering wheel does not move, keep the wheels straight.

5, the fifth is out of the library point, in the process of the warehouse after the successful reversing, pay attention to the position relationship between the horizontal line of the front hood and the garage sideline, generally when it coincides, to the left or right full of the steering wheel, this out of the library point is also the center point of the rear wheel of the vehicle flush garage corner line point. After the steering wheel is killed, the process of leaving the warehouse can be completed.