How to divide the C drive into a PC with the ASUS K501L version

The ASUS K501L version of the computer how to divide the C disk is as follows:

1. Right-click "My Computer" or "Computer" and select "Manage" command.

2. In the "Computer Management" window that opens, "Computer Management", "Storage", and "Disk Management" items are in order.

3. After that, you can see the partition of the current hard disk in the right pane.

4. Right-click on the disk space of "C drive" and select the "Compress Volume" command.

5. In the pop-up disk partition wizard window, select the compressed capacity, enter the capacity size of the new partition, then set the disk file format of the partition here, and check the "Do not format" item.

6. Finally, click the "Finish" button to complete the partitioning operation. Then open "My Computer", right-click on the new partition, select the "Format" command, and use the quick format method to complete all the operations from partition to format within one minute.

DiskGenius converts partition types between primary and logical partitions.

In some cases, if you want to convert a primary partition to a logical partition, or if you want to convert a logical partition to a primary partition, you can leverage DiskGenius. Due to the limitation of MBR partitions, there can be a maximum of four primary partitions and a maximum of one extended partition. Therefore, there are certain limitations to converting between logical and primary partitions.

To convert a primary partition to a logical partition, the following conditions must be met:

1. Before the primary partition, there are free sectors that need to be converted to logical partitions (generally one track, such as 63 sectors. A minimum of one sector is required).

2. There is no extended partition on the current disk, or the primary partition to be converted is next to the extended partition.

To convert a logical partition to a primary partition, the following conditions must be met:

1. The number of primary partitions of the current disk after conversion is not more than four (including the case that the current disk has only one logical partition).

2. The logical partitions to be converted are located at both ends of the extended partition.

When the partition meets the above conversion conditions, the corresponding menu item of diskgenius will be valid. Otherwise, it is grayed out.

To do such a conversion, first run DiskGenius and select the partition you want to convert. Then click on the "Partition" main menu, select the "Convert to Primary Partition" or "Convert to Logical Partition" menu item.

To prevent misoperation, the converted partition table is not saved to disk immediately after conversion. This change will not actually be written to disk and take effect until the Save Partition Table (Apply Changes) command is executed.

As follows, split disks under Windows, Disk Management. You can refer to:

Right-click on my computer-Management-Disk Management to see if there is any unpartitioned hard disk space, if there is, just right-click to create a new one.

Right click on my computer, click on Management, and then Disk Manager rebuilds the disk by itself.

It's best to divide the next partition software!

In an ASUS notebook, you can perform the following steps to compress a volume:

Make a backup of your personal data before proceeding.

1. Click the lower left corner of the desktop, or press Win+C, and the pop-up window in the following picture will appear:

2. Press the K key or click Disk Management (K) with the mouse, and the following window will appear

3. Right-click on the C drive and select the compressed volume

4. Wait patiently for a while

5. The size of the available compressed space appears.

6. If the free space size is compressed, the C disk is too small, and now we are ready to compress 300GB for the D disk, so we fill in 300GB * 1024 = 307200, here on the basis of 307200 add 10MB or 20MB, in order to prevent the full calculation of 307200 by the partition table to occupy the space, and become, so that the capacity is not an integer and not beautiful.

7. After clicking on compression, the black part of the figure below appears, and the unallocated space:

8. Right-click on the unallocated space and select Create Simple Volume

10. If you only divide a D disk, do not change the capacity, if you want to divide the unallocated space into multiple areas, here you will write the capacity required by the D disk.

11. The drive letter here has become E by default, why not the D drive, because the machine has an optical drive, and the D disk has been occupied by the optical drive that came first. Here we will keep the E disk unchanged, if you have obsessive-compulsive friends, you can go back to the disk management page and right-click on the optical drive, choose to change the drive letter and path, change D to the letter after it, leave the position of D out, and then change the current E disk to D disk.

12. The interface in the following picture can name the partition, let's choose the next step first, because the partition is in [This Computer], and the right-click partition can still be renamed.

13. Click Done, and the operation of compressing the volume partition is over.

After following the above steps, you can compress the partition of the volume.

Make a USB flash drive to boot first, then plug in the computer and boot into PE, and use the partition tool to quickly partition the disk.

The steps for disk partitioning are as follows:

1. Plug in the USB flash drive of the startup program into the computer and boot it on, and enter the PE interface;

2. Find "Partition Tool" under the PE interface and double-click to open it, as shown in the following figure;

3. There is a "Quick Partition" under the menu of this navigation bar, and after clicking on it, you can directly click the next step to partition the disk.

The steps to make a USB flash drive boot are as follows:

2. The interface of making a USB flash drive startup program is as follows, select the USB flash drive to be installed, select the default mode, and allocate the capacity by default. Then click one to make it successfully.

Before partitioning, it is recommended to use the disc to do a system image backup (to avoid the failure of the PQ partition), and use the ASUS built-in recovery system for system recovery after partitioning, to see if the system can be restored normally (after the recovery is still 2 areas, the C drive is restored), then the partition is successful. If not, just restore it with a disc and start over.

Will the XP be ready when you buy it?

Now ASUS machines seem to have a pre-installed XP system, and it is suspected that it is a prototype.

Reinstall the system! You go to the computer repair to install it for you, usually 10 yuan!

It can only be reinstalled in the partition anymore

What is the machine you bought, you try it with the optimization master, it is very easy to use,

Look at the left and right sides of the notebook to see if there are optical drives.

In the computer, there is an optical drive, click on it.

Hope you find the above information helpful! Thank you!

If the above reply still does not help you solve your problem, you can log on to the official website of ASUS to ask:

Or call ASUS Customer Service** to speak further with an engineer to help you solve the problem!

win7？

Right-click on the computer - manage - find the disk management - find the disk you want to split (such as d) right-click - select the compressed volume and then it is a fool's operation.

This is to allocate a large disk to the newly created disk space.

The key is not to lose the files inside.

Use Win7 disk management tool to partition, or use third-party software such as partition magician

Insert the system disk and partition it with graphics, but the hard disk files will be completely removed.

Pro: There is an option to reinstall the partition inside the system OK

Method 1 My computer - right-click on the spine - disk management - you will see the disk compartment and see if there is any other space, and then create a partition.

Method 2 Use pq partitioning software or other partitioning software to split the hard disk from the new chain and then install the system from the new one, and it's OK --ghost The partition software in the image disk is very simple, and you can't learn it online.

Agree Give an endorsement.

Right-click on the desktop icon computer point management to enter the computer management after the point disk management,There can be a macro to partition,My computer is Hua Shu Xingshuo k43sj is also the only one that is divided。

Open the control panel, click on the first one to go in (System and Security), at the bottom there is "Management Tools", and under the management tools, the first file beam three traces are to create and format partitions. That's it.

Put the XP system disc into the optical drive,And then keep pressing F12,Enter the quick start item,Select the CD to enter the CD,And then go stupidly into PE., After that, go in and have a big hard disk management master,And then use socks to accompany this partition on the mess OK,

1. First, right-click on the computer on the desktop and select Manage.

2. Select Disk Management in the interface that opens.

3. Right-click the disk you want to partition and select the compressed volume.

4. Enter the size of the partition you want and select Compress.

5. After that, an unallocated disk will appear, then right-click the unallocated disk and select a new simple volume 6, also enter the size of the new disk and click Next.

7. After that, select the name of the new disk and click Next.

8. After formatting according to the prompts, click Done, and a drive letter will appear.