-
Anonymous users2024-02-061.Make sure that the data or Wi-Fi network of the mobile phone is normal, and that the Bluetooth and GPS of the mobile phone are turned on.
2.Please go to the Bluetooth settings page of your phone, make sure that there is no pairing record of the watch in the "Paired Devices" list, if so, please click the symbol behind the watch name to make more settings, and click "Unpair".
3.There are two ways to put your watch in pairing mode.
1) On the watch side, select Settings > System to disconnect and reset.
After the operation is completed, it will take a while to factory reset the watch, and then make the watch face stay on the page with the watch name.
4.Update the Wear OS app to the latest version, then select Start Setup in the app, search for the watch name and tap Connect. When the watch side prompts "Continue to set up on phone", please follow the prompts in the Wear OS app on your phone to complete the settings and tap "Finish".
Note: When the watch and phone are paired with the Wear OS app, please do not perform other operations on the phone, and be sure to keep Wear OS running in the foreground of the phone at all times.
-
Anonymous users2024-02-05You can just re-pair that.
-
Anonymous users2024-02-041. First of all, in the vivo phone, open the app store.
<>3. Then in the page that opens, select the existing watch type in your hand, as shown in the figure below.
4. Next, select the watch model, as shown in the figure below.
5. Finally, turn on Bluetooth in the vivo mobile phone, and the mobile phone and the watch will work together to connect successfully.
-
Anonymous users2024-02-03For Huawei watches, of course, it is not possible to connect to vivo mobile phones, because they are not a brand series and have many functions, which are actually not connected.
-
Anonymous users2024-02-02There should be no way to connect this to the vivo phone, this should only control the connection to the Huawei phone, and there should be no way to connect the vivo phone successfully.
-
Anonymous users2024-02-01If the Bluetooth settings can be accessed and used normally, the Bluetooth connection device can be used normally. If you need the corresponding software, you can scan the code directly.
-
Anonymous users2024-01-31Huawei's watch can also be connected to this vivo mobile phone, as long as it is through this Bluetooth or other connections.
-
Anonymous users2024-01-301. First pairing.
1.Install Huawei Health.
Apply. If you already have a finch pin installed, please upgrade to the latest version.
If you don't have it installed, go to the mobile app market.
2.Go to the Huawei Sports Fitness app, touch Me, and then touch Log in to your HUAWEI ID. If you don't have a HUAWEI ID, register it.
3.Turn on the wearable device, select the language and start pairing.
1) Hold the wearable device close to the phone, enter the mobile health app, tap the four dots in the upper right corner of the interface> Add device, find your wearable device in the scan result, and click Connect.
2) A Bluetooth pairing request prompt box appears on the sports and health interface of the mobile phone, click Agree.
3) When there is a pairing request on the screen of the wearable device, tap Chong Suimin, and at the same time complete the pairing of the wearable device and the mobile phone according to the interface prompts on the mobile phone.
1) Hold the device close to your phone, open the Huawei Health app on your phone, touch the four dots in the upper right corner of the screen > Add Device, find your device in the scan result, and touch Connect.
2) When a pairing request appears on the wearable screen, tap . On the Huawei Health app interface on your phone, a Bluetooth pairing request prompt box appears, touch Pair. When a prompt box appears on your phone that says whether to allow your device to display phone notifications, tap Allow.
3) Wait a few seconds for the Huawei Health app to indicate that the pairing is successful, and then touch Done to complete the pairing of the device with your iOS phone.
2. Connect your new phone.
In the wearable device settings > System menu or System & Update Connect to a new phone, tap and follow the prompts to complete the pairing.
A factory reset will remove the data from the device side, so please proceed with caution.
-
Anonymous users2024-01-29You can check the watch's instruction manual, or you can consult the watch manufacturer's customer service to learn how to connect the watch with other devices.
-
Anonymous users2024-01-28You can check the watch's instruction manual, or you can consult the watch manufacturer's customer service to learn how to connect the watch to other devices.
-
Anonymous users2024-01-271. Prerequisites for pairing and connecting Huawei phones through the self-discovery function: 1The system version of Huawei phones is above and above.
1.On the phone: Turn on the Bluetooth switch on the phone and keep the screen on.
2.Hold the watch close to the phone, the distance should not exceed the first interface of the phone, and the pairing window will pop up, and click Connect. 4.
In the pop-up window of the phone, it shows that it is connecting. A pairing request will appear on the screen of your watch, tap the check number. 5.
Wait for 10s, the watch interface shows that the pairing is successful, and click Finish in the pop-up box of the mobile phone. At this point, the watch is paired with the Huawei phone. 2. Prerequisites for pairing and connecting with a Huawei phone through the Health app:
1.The system version of Huawei phones is above and above. 2.
On the side of your watch, select the system language. Take Chinese Simplified as an example. 2.
On the phone side, open the Health app, tap Devices > Add Device, and the Health app will automatically scan the surrounding connectable devices. 3.Please select the watch you want to connect to in the list of devices, and tap Connect behind the device.
If there is no target device in the device list, you can click Add Manually, select the correct target device model, and click Start Pairing. If there is no target device in the device list, you can click Scan to scan the *** on the watch. 4.
The Bluetooth message synchronization service interface is displayed on the side of the phone, and click Agree. 5.Pairing appears on the phone side.
A pairing request will appear on the screen of your watch, tap the check number. 6.Wait for 10s, the watch interface shows that the pairing is successful, and click Finish in the pop-up box of the mobile phone.
At this point, the watch is paired with the Huawei phone.
At present, the maximum memory of the mobile phone is: 12GB RAM+512GB ROM, and the models with this memory are: iQOO 9 iQOO 9 Pro >>>More
1. Before closing the back cover of the watch, you need to check whether the meter opening tool is ready, under normal circumstances, only a special meter opener and a steel knife are needed. >>>More
Do you want to say that people have set a boot password? Why didn't the landlord return it to the owner? >>>More
It's G300, I also use this model of mobile phone, and I think it's not as good as the original version of brushing other versions. After rooting directly, delete the system software and use it. Install too version of the Android book, running too slow.
Huawei and Honor are the dual brands of Huawei. The two brands are operated and designed independently, both to better meet the needs of different consumers, but Honor and Huawei are the same after-sales system, and their quality and service are the same.