The home decoration living room tiles are broken, can you put another layer of tiles on the tiles?

A few days ago, I went to the community and found that my neighbor's house was being renovated, and I wanted to go in and have a look, and found that my neighbor's house was all tiled. I thought that my neighbor had really spent a lot of money to renovate the house, but after talking to the neighbor, I realized that it was a project given by the decoration company.

This is the site of the balcony tiling. This is really a big project, I see that the master's craftsmanship is good, and he is very serious. This is the method of dry-laying tiles, which makes it more solid.

Level the ground before tiling. The next step is to apply cement mortar, which can be better bonded.

Cement mortar not only has the effect of bonding, but also makes the tile stronger.

When pasting tiles, you must leave gaps, and you must do beautiful seams in the future.

Once the tiles are attached, hit them with a hammer.

After pasting, don't forget to knock each one through.

Look at the tiles on the wall.

It's the restaurant and the whole house is tiled all over.

This is the effect of the bathroom. This is the bathroom wall tile, look at the master's craftsmanship, really good.

A partition is also designed here, which is very convenient and practical to use in the future.

Disclaimer: Some of the **** in this article is used in part of "Oriental IC", and any newspaper, newspaper, television station, company, organization, or individual may not use it in part or in whole without the permission of Oriental IC. Other **** networks, if they involve infringement, please contact the author to deal with and delete.

It can be exchanged.

It is difficult to replace only a few floor tiles, because it is almost impossible to match the same color, model and style of floor tiles over the years. If the original floor tiles have been partially damaged, hollowed out or falling off, the surface enamel has been worn, or seriously dirty, it must be removed and replaced.

At present, there are two kinds of brick wall renovation materials on the market: tile surface treatment agent, tile and mosaic binder, which can be directly painted on the old brick surface, and then paved with new floor tiles, saving time and energy. Kitchen and bathroom floors, regardless of the type of tile, can be directly tiled with new tiles on top of the old ones.

Extended Materials. Precautions for tile paving.

1. Before paving, the object to be pasted or the ground should be flattened, and the dry paving method can only be paved with tiles when the base layer reaches a certain hardness, and the joints are adjusted between 2-3mm when paving.

2. Before paving, the tile needs to be soaked in clean water for 20-30 minutes, and the water can be filtered before paving, otherwise the water will evaporate after paving, and the tile will easily warp. Moreover, before use, you should check whether the color number and size indicated on the outer packaging are the models you ordered, and whether the bricks with a unified color number have defects such as color difference and broken threads. Only by using a uniform color number can the color be uniform.

3. If the pattern inlay characteristics are obvious, please identify the parquet characteristics, maintain a unified direction of paving, and the pattern features are not obvious or no pattern, please combine the construction effect requirements to pave.

4. After the paving is completed, the cement stains remaining on the brick surface should be wiped off in time. The ground that has been paved needs to be cured for 4-5 days to prevent local unevenness of the ground caused by external forces.

Yes, you can change it. Knock it off and reinstall it, and stick it directly on the original floor tiles, both of which can be used.

But beware:

1. It takes time to re-knock it out and reinstall it again, and the cost will be even higher.

2. If the floor is low and there is a suspended ceiling, it is best not to choose the wooden floor for direct paving, because the thickness of the ground for paving the wooden floor will be higher, which will make the floor spacing shorter.

3. If you pave it directly, it will raise the ground, pay attention to whether the door and door frame are kept level and can be used normally.

It can be, but it is more troublesome to change a cement that has solidified tiles, you first ask if there is a master who is willing to do it, and then ask him how much he wants, and then see if there is a batch of bricks with your bricks, if it is not a batch of goods a manufacturer, the size will be deviated, and then decide whether to change or not.

The tiles should be dug up first (usually cut in the middle) and then knocked out from both sides.

Ask a professional.

But it can only be applied with adhesive.

Yes, ask a worker to tear it down and put a new one on it.

If it's not obvious, don't change it, changing the page can be a trouble, and if you don't get it, it will be a good brick.

Ask a professional to construct it, dig it out in the middle, and if you don't do it well, you will also break the other bricks.

The tiles that have been pasted are not good-looking, I want to replace them, what should I do?

Step 1: Remove the old tiles. To remove, apply a piece of masking tape to the center of the tile.

Then, put on your goggles and drill a hole with an electric drill and carbide drill bit where the tape is attached. Remove the tape and use a glass knife to make an "X" on the tile. Then, use a chisel and hammer to break the tiles and remove the debris.

Step 2: Use a putty knife or a grooved paint stick to apply the ceramic sand glue to the back of the new tile, keeping the tile edges clean.

Step 3: Carefully place the new tile into the notch in the wall. Compact the tiles and gently move them up and down, left and right, so that the sand glue is evenly distributed.

The gap around the tiles should be even, and they should be accurately aligned with the surrounding tiles. Glue the tiles firmly with masking tape or regular tape and allow the sanding glue to cure according to the instructions provided by the manufacturer.

It's not easy to deal with, so you can only replace a few pieces nearby, and you can only chisel them off little by little.

Tile stickers are painted on tiles that play a decorative role, and stickers are the same.

If there is a lack of tiles, it is impossible to make up for the height difference between the missing place and the tiles next to it with ceramic tiles, and the effect of tiles on the cement will be ugly.

It is recommended to use tiles to repair, it will not be troublesome, just paste a few bricks. lz can go to the forum of the love home network to have a look.。。

Decoration knowledge, decoration experience and so on.

There's a lot to learn over there...

Just get it off and re-stick it.

Generally, it won't fall. But there are still prerequisites.

The premise is as follows, for the living room wall, 300*450 or 300*600 bricks are generally pasted with cement mortar.

Bricks of 600*600 or above size are generally constructed by dry hanging process.

In the north, there are two types of cement mortar pasting: traditional pasting method and thin pasting method.

They are generally made of cement with medium sand and water.

The traditional sticking method must be careful in workmanship to prevent the hollowing of wall tiles in the later stage;

Glue needs to be added in the thin paste cement, and the thickness is more dominant after completion, but the unit price is slightly higher.

The premise of dry-hanging stone is that the length and width of the space should be large, and the effect can be seen after completion, which is more atmospheric.

In addition, the upfront design is very important.

No, use wall tiles, not floor tiles. There are a few points that need to be paid attention to during construction, the first is to chisel the wall, such as the batch of ash must be eradicated clean and then chiseled, and then go to buy some professional adhesive for tiling, ** will be more expensive, it will definitely not fall, do not do dry hanging at home, the cost is too large, and it takes up too much space, unless it is a villa or something big house to do the same, if you can't buy adhesive, use conch cement and building 801 glue can also be. As long as the materials and construction are strictly controlled, it will not be dropped.

As long as the paste is pasted, there is no hollow drum on the cement wall, and it will not fall.

It won't fall, you can't fall off if you want the kitchen and bathroom to be so wet.

Many people are not satisfied with the tiles that have been laid in their homes and want to re-pave them to make a change, but they don't want to spend time and time prying off the original tiles. So can you still put tiles on the tiles? What should I pay attention to when sticking tiles on ceramic tiles?

Depending on the situation, if the original tile is intact, a new tile can be applied to it. Clean the original tile before paving, and then add tile adhesive on the back of the new tile for paving; However, if the original tile is bulging or damaged, it is recommended to remove the original tile and then pave a new tile, otherwise the tile is easy to fall off.

What should I pay attention to when sticking tiles on ceramic tiles?

1. If you want to pave tiles on the original tile, you can't apply cement on the original tile first, you need to polish and level the original tile surface and then apply cement.

2. Although there is a new type of tile adhesive on the market, which can make the new tiles and the old tiles tightly bonded together, it is not recommended to use them if they are used in the bathroom, because the bathroom uses water for a long time and is more humid, and this adhesive will be dissolved if it is in contact with water for a long time, resulting in the tiles bulging and falling off.

3. If the size of the newly purchased tile is not the same as the old tile, then the gap between the original tile should be filled and then the new tile should be paved during construction. Otherwise, it is easy to cause air inside the tile, which will lead to bulging. In particular, there is a vertical transportation of the wall where water heaters and showers are installed, and you must pay attention to it when paving, otherwise these equipment will not only cause damage to the wall, but also fall down and hurt people.

Summary: The above is for everyone to introduce Yu Hong Liang Shao's tiles can still be tiled and the relevant content of the precautions for tiles on the tiles, I hope to help friends in need, if you need to know more about the relevant knowledge in the later stage, welcome to pay attention to Qeeka Home information.

The living room wall can be tiled to avoid falling off: generally speaking, when we decorate our own house, we expect the best quality of our own decoration house, so that in the case of interior decoration on the wall tiles, in fact, the quality is very guaranteed, the tiles are more hard, and special wear resistance, all of which are some good information that we must choose when decorating. And the tile is very comfortable in the summer, the appearance is particularly simple and generous, decades are not outdated, if you change to the wallpaper, you need to often change some new design style, but because the design style of the tile is very simple, so it has been fashionable.

The first option for wall tiles in the large living room is the glazed brick. That is also a commonly used choice plan scheme in the past, that is, the tiles selected for the wall of our large living room, which are the main wall tiles. This kind of tile refers to the general glaze tile.

The vast majority of glazed tiles belong to ceramic tiles, which have a relatively high water absorption capacity. The surface has a layer of glaze, and it also has the characteristics of waterproof, stain resistance and cleaning resistance. Therefore, it is very suitable for use on walls.

If there are quicklime powder, wall paint, wallpaper and other decorations on the wall, or there is waste on the ground, it must be cleaned up, otherwise the mixed mortar and the rural base are not firmly bonded. If there are gaps in the wall itself, they should be properly disposed of before tiling.

Wall tiles should be soaked sufficiently: due to the high moisture content of wall tiles, it is important to take this property into account when attaching. Before tiling, it should be completely watered and damp, otherwise the moisture in the cement mortar will be quickly digested and absorbed by the dried bottom layer and the tile and solidify quickly, which will directly affect its bonding color fastness.

Otherwise, the wall tiles absorb water from the concrete, so that the concrete cannot have the effect of adhesive. The floor tiles should be scraped first: the uncoated concrete floor tiles should be laid on the ground, and after being knocked flat, the cement mortar should be coated with the floor tiles and paved on the road surface, and the diagonal parts of the four bricks should be level.

The wall of the living room can also be tiled, but there are pros and cons to tiles, and the advantages are convenient to take care of, while the B-end is too cold and cold, which will give people a not very warm feeling; First of all, the tiles should be soaked in more water, and if they are soaked in water, they should be soaked full, and there is to clean up the base layer before tiling, and then they should be tiled.

Yes, you must soak the tiles with water in advance when pasting tiles, and then you can use the tile adhesive, so that the tiles will be particularly firm.

It is possible to paste tiles, you need to pay attention to not leaving too many gaps in the middle of the tiles, and to carry out beautiful seams, the tiles should be relatively strong.

Recently, some netizens wanted to renovate the bathroom of their home, but they didn't want to make a big deal of rectification, so they came up with a solution: live on the original tiles and put yellow sand cement tiles on them. Does his solution really work? Let's take a look.

"Generally speaking, this is not recommended for property owners," the expert said. The original wall itself is paved with tiles, and its surface is relatively smooth, and the direct application of new bricks will lead to insufficient tile adhesion and easy to loosen and fall off. If there are owners who plan to do this, there are three things to keep in mind. ”

Three things to keep in mind

First, it can not be in the original'The wall tiles are covered with cement and mortar, and the walls must be leveled.

Use a sander or other grinding tool to polish the original tile surface to a very rough or uneven surface, and then adjust the cement mortar to a suitable ratio for paving. Although this can reduce a certain amount of work, the old tiles themselves have occupied the space of the bathroom when they are paved, and the new tiles on the original tiles will occupy a few centimeters of more space, and the owners must take this into account when paving. From the point of view of ensuring the long-term quality of ceramic tiles, it is recommended that it will be safer to remove the original tiles and then re-pave.

Second, although the tile adhesive on the market can also bond the new tile to the surface of the old tile, it is relatively simple and clean to apply.

However, the bathroom is a damp space, and the tiles are easy to regain moisture, and in this case, the use of tile adhesive will cause the tiles to fall off in pieces, especially when the adhesive effect is not good.

Thirdly, because the size of the old tiles is different from the new tiles, the gaps left are also different.

The wall needs to be leveled, and the original gap must be smoothed, so it will be very difficult to pave. In addition, there is a hollow drum in the old tile itself, and the new tile is fixed on its surface with tile adhesive, which is easy to cause safety accidents. Because bathroom equipment needs to be installed in the bathroom, it is necessary to punch holes in the tiles, and if the tiles are hollow, they cannot carry heavy items.

For example, the weight of hardware and mirrors is easy to fall off after a long time, causing accidents.