Can virtual memory be turned off???? Eager!!!

Yes, but if the physical memory is not large enough, it will be very slow, if it is Vista, there is no more than 2G memory, it is recommended not to turn it off, it is slow, like a snail, XP also has to be more than one G.

However, the virtual memory should not be too large, generally not 1 times the physical memory is the best, too large will also affect the speed.

When the physical memory is greater than 1G, you can turn off the virtual memory!

Virtual memory is used to temporarily store files when the physical memory is less than 512M and is not enough to run large programs! But if the physical memory is greater than 1G, the virtual memory is not very needed!

Especially if you have enough physical memory, it's enough to handle the memory requirements of most software! After all, 5G games are not about putting 5G into the memory at the same time!

So you can turn off the virtual memory to reduce the burden on the hard disk ......

Yes, as long as your physical memory is large enough to meet the needs of the programs you open when you use the computer on a daily basis, the role of virtual memory is basically not obvious.

It can be turned off artificially, but the system will be automatically enabled without your consent under certain circumstances, but turning it off can really improve the speed of the system.

Can't turn off It will slow down when turned off.

When you turn on the computer, it will prompt the error "Virtual memory is insufficient" if it takes up a little memory.

If it's more than 1g, turn it off.

What to do to save hard drives.

It's okay, your physical memory is big enough, just set the virtual memory to the size of the system management.

The first case: the general situation is like this, but it still depends on your CPU, if it is AMD, there may be problems, Intel's is generally fine;

The second case:It's the same situation as you said,800It's automatic frequency reduction,Just pay attention to compatibility problems,It's best to have two strips of the same brand,Memory particles are also the same brands。

Dizziness, turning off the virtual memory will only slow things down!!

LZ, your computer was originally 1G, and then you bought a 2G plus, how could it be.

Virtual memory is a memory management technology in the computer, it plays a very important role in the whole system, but users sometimes have to turn it off, so let's take a look at how it is turned off today.

Virtual Memory FAQ].

How to turn off virtual memory:

1. Find the "computer" of the desktop hand

2. Right-click and select "Properties".

3. Click "Advanced System Settings" on the left side of the interface

4. Click "Settings" in the performance bar

5. Select "Advanced".

6. Click "Change".

7. Cancel the "automatic management of the paging file size of the drive in the past acres".

8. Click "No pagination file" below, and then click "Settings".

9. According to the prompts, whether to turn off the virtual memory, click "Yes".

10. After restarting, it is found that the virtual memory has become 0m, which means that it has been shut down successfully.

1. First open the properties of my computer on the desktop.

4. Tick the box to select Advanced Options.

6. Select Yes to restart the computer to complete the operation.

Virtual memory is a technology for memory management in computer systems. It makes an application think that it has contiguous usable memory (a contiguous complete address space), when in reality it is usually divided into multiple physical memory fragments, and some are temporarily stored on external disk storage to exchange data when needed. At present, most operating systems use virtual memory, such as the "virtual memory" of the Windows family; Linux's "swap space", etc.

If the Windows 8 operating system is stuck on the Windows logo page when booting and cannot enter the system, and must be forced to shut down and restart to open it, you can adjust the virtual memory settings appropriately.

Turn off your computer's virtual memory.

How to set up virtual memory:

1. Right-click the "Computer" icon (XP is My Computer) and select Properties.

2. Click the "Advanced System Settings" tab in the system properties window, and then click the "Settings" button in the pop-up dialog box.

3. Click "Advanced" in the pop-up performance options window, and click the "Change" button in the virtual memory below.

4. The pop-up dialog box is to set the virtual memory, the virtual memory is best in the non-system disk, select the drive letter, and click "Custom size". Enter the "Initial Size" and "Maximum" and click the "Settings" button. (The minimum value of virtual memory is 1 to times that of physical memory; The maximum value of virtual memory is 2 to times that of physical memory.

5. If you say "To make the changes take effect, you need to restart the computer", click OK.

6. Click "OK" in all windows until it pops up "You must restart your computer for the new settings to take effect." Click "Yes" and the system will restart automatically.

After the reboot is complete, the virtual memory settings take effect.

My Computer property.

Advanced performance.

Settings Advanced

Change the unpaginated file.

Correct this: usually don't close it well, 100% will.

Blue screen, some.

The software needs to be called, so something will go wrong.

In the earliest days. time, computer.

The memory is small, so it is not enough, so a piece of hard disk space is created to be used as memory, and this space is called "paging files".

Because of that time.

The memory is really small, and almost all machines refuse to meet the memory needs, so when developing software, there is a specific set of steps to call the paging file.

In the following era, memory has expanded to a certain extent, and many machines have been able to fully meet the memory needs of software, but there are still them.

Part of the machine can not be satisfied, in order to ensure effective.

Compatibility and. Stability, paging of files.

The tradition is still preserved, which makes the software compatible and can run stably on both high-profile and low-profile machines.

Time has passed, and now the configuration memory of the machine has been unexpectedly large, but of course, software developers will not only consider these high-configuration machines, but also need to take care of low-configuration machines, so the tradition of paging files is still preserved today, but countless optimizations have been made to call the least paging files on high-configuration machines, but still need to be called.

If you put. Virtual memory.

If it is turned off, then once these software needs to call the paging file, it will cause an error, resulting in the software not working properly or even the blue screen of death.

Therefore, in high-configuration machines, the virtual memory can be set as small as possible, but it cannot be left unset, in order to ensure compatibility.

Right-click on Computer, the menu that appears in the Dots Properties, dot Advanced System Settings on the left, the Advanced tab, the Performance Settings, the Advanced of Performance Options, click on Changes under Virtual Memory, first remove the check box for automatic management, and then check the No paging files, as shown in the figure below, unless necessary.

Virtual memory.

Right-click on My Computer, select Properties, and find Advanced System Settings. In this dialog box, select the "Advanced" tab above, press the "Settings" button in the "Performance" box, select the "Advanced" tab in the new dialog box, and press the "Change" button in the "Virtual Memory" box. Select the drive letter with virtual memory here, change the following "System Management Size" to "No paging file", press the "Settings" button on the right (be sure to press), and then click "OK" below, and you can go back, you need to restart to take effect.

In my computer, in the properties, in the advanced tab, performance point settings, and then click advanced, at the bottom you see the virtual memory, just change it.

But I advise you not to turn it off, even if you have a large memory, do not turn off the virtual memory, which will cause some games and software to have inexplicable errors.

Right-click on My Computer -Properties -Advanced -Performance Settings -Advanced -Virtual Memory Changes to change all partitions to page-free files. Then tap Settings.

My computer right-click properties - Advanced - "Performance" settings - Advanced - "Virtual memory" changes.

After entering, select the disk that allocates virtual memory, and select "No paging file" to confirm.

Don't disable it, I'm also 2g RAM. Not disabling is good for the computer. 2G is also not very big. If you're as big as 4g. You can consider disabling virtual memory

The question is why would you want to disable virtual memory? That can speed up your computer. If you want to save space on the system disk, you can change it to a different disk. If you really want to disable it, you can set its space size to very small.

Advanced There is a virtual memory under Performance Point Settings and then Advanced, which can be set by clicking on Settings.

After selecting the unpaginated file, click Settings, and then click Save.

It's best not to set it this way, because your memory is 512, and if you don't have enough memory, virtual memory can help you process the data, which will help you run with your computer.

Optimization 5 that needs to be done after the installation of win10 system: turn off the virtual memory!

Now the hard disk space is large enough, and it should be smaller. A bit of virtual memory can be useful sometimes.

10. After deleting the virtual memory, we need to restart the boot system before it can take effect. After restarting the system, we can see that the virtual memory has been cleared, as shown in the figure.

Note: When your computer's physical memory capacity is low, virtual memory can help speed up your system. It is recommended to have less than 4G of physical memory and do not delete the system's virtual memory.

Setting the virtual memory value to zero cancels it.

Right-click on My Computer - Properties - Advanced - Performance - Settings - Advanced - Virtual Memory - Change, see which disk your virtual memory is set on, select the disk, select "No paging files", and then click "Settings" to OK to exit.

You didn't delete the virtual memory of the C drive when you changed it, did you? Set the virtual memory of the C drive to 0

Optimization 5 that needs to be done after the installation of win10 system: turn off the virtual memory!