Can self leveling be done on tiles, and can self leveling cement be used for tiling

Yes, but non-absorbable interface agents are used.

This depends on the specific situation of the floor tile.

Use non-absorbent interface agents. This depends on the specifics of the floor tiles, if the floor tiles.

There is a certain adhesion, you can not beat the hair, if it is very light, you need to beat the hair, after the hairing can do self-leveling, strengthen the base and self-leveling cement.

The adhesive is called a water-based interface agent, which is matched with self-leveling.

Self-leveling is a solvent-free, self-leveling, dense particle high-build epoxy floor coating. Self-leveling, smooth surface, beautiful, mirror effect, acid, alkali, salt, oil corrosion resistance, especially strong alkali resistance, can be used for high clean, beautiful, dust-free.

Sterile and anti-static electronics and microelectronics industries can also be used in schools, offices, homes and other floors.

The application of self-leveling technology is first of all an innovation, the floor material in the liquid state will flow automatically after spreading to the ground, of course, this flow is not arbitrary, the liquid will automatically find the low-lying area on the ground and fill it, and finally the whole ground will flow into a mirror-like flat after static, condensation and solidification. The whole process does not rely on manual scraping.

Performance characteristics: solvent-free epoxy resin is selected.

Add high-quality curing agent.

It is made with conductive powder;

The surface is smooth, beautiful and has a mirror effect;

Resistant to acid, alkali, salt and oil corrosion, especially strong alkali resistance;

Abrasion resistance, pressure resistance, impact resistance, and certain elasticity.

Problem 1: Fungus grows on the floor due to moisture.

Problem 2: The floor swells and arches.

Problem 3: There is a noise from the floor stamping.

Renovating the ground to make cement self-leveling is no less than the tile floor, the ground reaches high leveling, high wear resistance, scratch resistance, and most importantly, green environmental protection materials, which can be done simple and elegant industrial style, and can also be made colorful artistic ground. It is also a good helper for renovating the ground, saving time, effort and worry without smashing, and solving all the confusion of the owner.

Can't do it, the enamel layer on the surface of the tile is too smooth, the self-leveling adhesion is not good, and it will warp and crack after a long time.

Not sure what effect you want to achieve.

Self-leveling is a common method of room floor leveling, the advantage is that it is really flat and uniform, and the disadvantage is that not all places need to be leveled, which is wasteful.

If it is a floor tile, the difference in the flatness of the ground in the room is very large, so the leveling is considered, and the general small error (within 3cm) does not affect the tiling.

As for what you said, do self-leveling on floor tiles (tiles), what kind of effect do you want to do? Must this approach be needed?

Hello dear, happy to answer your <>

Answer, self-leveling cement can be tiled with it is recommended not to pave floor tiles, self-leveling (generally epoxy resin self-leveling) itself is the ground surface layer, and the surface of the self-leveling ground is smooth, and the direct paving of the floor tiles is not good. If it must be paved, it is necessary to make another layer of bonding layer on top of the artesian plane layer. Self-leveling is a technology that emerged from the 70s, and the advantages are that it is not segregated (the various components in the cement mortar are not separated during the whole construction process and after the hydration reaction), no sand (after the hydration reaction, the sand appears on the surface, and it has been impossible to smooth it with pure cement powder), no dust (after the hydration reaction, no white powder appears on the surface 1

Self-leveling itself is actually directly done on the tile, that is, when you need to brush the self-leveling interface agent, you need to wait for a long time to paint the second time, and you can brush it three times after it is completely dry. 2.After it is completely dry, Hu Ruc, start to beat the material, the material must be beaten for a long time, and the material is completely opened to the pants.

3.Grouting and scraping oak old flat. If you do it on the floor, you can generally make about 3 mm, and if the ground is uneven, you can make a thickness of 5-6 mm.

4.Defoaming treatment is mainly to eliminate the bubbles on the slurry, and it is best to roll 3-5 sides with a tool.

OK. Self-leveling is generally used for undecorated floors, and there is no problem if it is to be used on ceramic tiles, but non-absorbent interface agents must be used. This depends on the specific situation of the ground tile, if the floor tile has a certain adhesion, you can not beat the hair, if it is very light, you need to beat the hair, after the hairing can be done self-leveling, strengthen the base and self-leveling cement adhesive called water-based interface agent, is used with self-leveling.

Can't do it, the enamel layer on the surface of the tile is too smooth, the self-leveling adhesion is not good, and it will warp and crack after a long time, but it should also be based on the specific situation, if the tile adhesion is better, it can also be self-leveling.

Self-leveling cement is an inorganic porous material, in order to be more convenient in daily use, it is generally recommended to coat the surface of self-leveling with water-based polyurethane, vegetable oil, water wax, etc. for closed or semi-closed treatment.

Yes, but non-absorbable interface agents are used. This depends on the specific situation of the floor tile. Use non-absorbent interface agents.

This depends on the specific situation of the ground tile, if the floor tile has a certain adhesion, you can not use the hair, if it is very light, you need to beat the hair, after the hairing can be done self-leveling, strengthen the base and self-leveling cement adhesive called water-based interface agent, it is matched with self-matching.

Yes, but non-absorbable interface agents are used. It depends on the situation, if the floor tile has a certain adhesion, then you can do without hair, but if it is very light, you need to beat the hair, after the hairing can be done self-leveling, strengthen the base and self-leveling cement adhesive called water-based interface agent, it is used with self-leveling.

I don't think so, in fact, in fact, the tile floor can be made into self-leveling water on the ground, but this is a bit too wasteful, and it is not beautiful in form.

OK. Because he is now a very popular material on the market, and it is very thin, young people nowadays like it, because he is more individual, simple, free, and exudes the characteristics of simplicity and simplicity.

You can't do it directly, because the tile will not be too flat if there are gaps, so if you deal with the gaps, you can put a layer of plastic flooring on top of it, or use a shot blasting machine to wipe the roughness.

Self-leveling cement can be made directly on the tile floor, and the specific operation steps are as follows:

Step 1: Polishing the tile floor;

Step 2: Vacuum;

Step 3: Special interface agent on roll-coated tiles;

Step 4: Construction of self-leveling cement;

Step 5: Self-leveling cement surface covering.

Yes, the tile floor is polished, one is to remove the tile surface attachments, the other is to increase the roughness of the tile surface, the second is to vacuum, use a vacuum cleaner to suck off the excess dust and loose materials on the ground, and the third step is to roll the special interface agent on the tile.

I don't think it's good to do this, because if you have artesian horizontal mud on the tile floor, it may make the durability of the tile not very long, and it will also reduce the quality of the tile, and even cause the tile to crack.

I think it's needed. Because then you can get a good control, and the height will be uniform, it will look very beautiful, and it will feel the same height.

No, because this may cause loss of materials, sometimes such a method is not particularly practical, and now generally speaking, the people who put tiles are more professional.

It is definitely needed, so that there will be a particularly good leveling, and the home can also have a very good aesthetics, and can be kept on the same level.

Self-leveling is a professional decoration term, is a process we often encounter in decoration, many friends who decorate for the first time may not understand this, we all know that the ground laying will always encounter the problem of leveling, self-leveling is simply a way of ground leveling. The special self-leveling cement is diluted and other additives are added, which can flow to the ground according to the unevenness of the ground, and the ground can be automatically leveled. Self-leveling cement made of cementing materials such as ordinary cement, high-alumina cement, and Portland cement.

Self-leveling cement is a high-tech green product with high technology content and complex technical links. The material can be mixed on site. Master Wang gave me an analysis of the benefits of self-leveling on tiles:

Self-leveling on the tile saves money, this is also because the first to replace the tile first ask the worker to knock it off and redo, the tile has to pay the worker's wages, but also to spend money to buy new flooring materials, the time is long, and directly on the tile to do self-leveling even without asking workers, you can operate, save trouble and money. Beautiful.

Compared with the cement floor, the self-leveling ground has a special mirror effect, which makes it atmospheric and super high-grade. And it is very suitable for more popular home furnishings like Northern Europe, in recent years, the industry decoration style, if you want to get tired of the existing home decoration, want to change the style, leveling on the original tiles is also the most basic change. If you feel that the self-leveling color is too monotonous, you can add your favorite lines when the ground is dry.

Although self-leveling on tiles is simple and quick, it still has certain shortcomings.

If your family lives on the first floor, don't learn from others to do this, because the humidity on the first floor is relatively large, which is easy to cause the floor to expand and bounce up due to moisture, and even the floor tiles will be affected to a certain extent every time you stick a gear, but if you live on other floors, the ground moisture is small, and you can still do it, but remember, it is best not to do it in the living area with high humidity such as the bathroom. So, what is the difference between self-leveling on ceramic tiles and self-leveling directly on cement? Before self-leveling on the tile, the brick surface should be dehaired.

I think it's needed. Because if self-leveling is done, the ground can be flattened, the floor will not be uneven, there will be no problems in the later stage, and the service life of the tiles can also be increased, and it looks very beautiful, and it can also save the maintenance cost in the later stage.

Self-leveling is required before tiling. Only by leveling the ground so that there will be no problems when tiling tiles, there will be no hollowing phenomenon. The purpose is to make the tiles more flat, avoid hollowing, and avoid rework.

No, after doing self-leveling, the tile may appear hollow, ** is relatively expensive, about 20 yuan per square meter, to clean the base layer, to ensure that the cement and the base surface can be better adhered together.

Before pasting tiles, it is necessary to do self-leveling, because the level requirements of the tile on the ground are relatively high, if you do not do self-leveling, the tile is easy to rework for the second time. The purpose is to make the tiles stronger and more stable.

needs to be done; Self-leveling can save trouble and money before tiling, and even without workers, you can do it yourself, and it is very beautiful, and self-leveling also has a special mirror effect, which is very atmospheric.

Yes, such an operation can have a better fitting effect. The purpose is to prevent the tiles from falling, to make the wall look more flat, the decoration effect is better, and the tiles can fit better.

Of course you need to do that. The purpose is to ensure the stability of the wall, ensure the stability, ensure the fit of the tile, in order to make the tile better fit, in order to prevent the tile from falling.

There is no need for self-leveling, but it needs to be leveled, which is done to make the ground more flat and can be better laid, and the bathroom needs to have a certain slope to better drainage.

Absolutely. The purpose is to ensure that the wall is flat, in order to prevent the tiles from falling, in order to make the tiles fit more smoothly on the wall, the tiles can be protected, and the wall can also be protected.

It depends on personal preference, you can do it or not; Self-leveling allows us to reduce the expenditure of manpower and financial resources when replacing tiles in the later stage, and self-leveling on the tiles can make the overall appearance atmospheric and beautiful.

I think that before pasting tiles, we must do self-leveling, so that the tiles can be pasted more tightly, not easy to fall, and will also make the tiles very smooth, very good-looking.

It needs to be self-leveling, the purpose is to make the ground more flat, so that after the tile is pasted, it will be more flat, and then the whole will be very beautiful.

It is a self-leveling that needs to be done, which is simply a way of ground leveling, the purpose of which is to automatically level the ground and better paste tiles.

I think it's what needs to be done before tiling; Doing this can understand the unevenness of the ground according to the level, and can better ensure the smoothness when laying tiles.

It is to be self-leveling; The purpose of self-leveling is first to find the leveling of the entire ground, and the second is to save money, and you can do it yourself.

It is not allowed to do, the purpose is to deal with the details, solve the problem of tile hollowing, and ensure the bonding of cement and base surface.

Yes, this can make the tile sticker more flat, not easy to have some holes, and you can have a better feeling when you use it.