How can the Tree of Happiness be raised better?

The ways to raise a good tree of happiness are: the right temperature, the right light, and so on.

1. Suitable temperature.

The cold tolerance of the happy tree is relatively poor, and it is very afraid of low temperatures, so in order to make the happy tree at home evergreen all year round, it is necessary to try to control the maintenance temperature above 10 degrees. Generally speaking, whether it is winter or summer, the environment of about 15 degrees Celsius is the most suitable for the growth of happy trees.

2. Proper lighting.

Light is also very important for the growth of plants, especially plants like the happy tree, if you want it to grow well, you must ensure sufficient light, except for summer, the light in the other three seasons is relatively soft, and putting it in the sun will make its root system grow more robust, and the plant will be more leafy.

However, the temperature is higher in summer, and the light is more scorching, so it is necessary to control the direct sunlight on the happy tree, and give it sunscreen at noon.

Precautions for raising a happy tree:

1. Soil requirements.

Acidic soils that are loose and fertile, well drained and breathable, and rich in humus should be selected as the substrate of the happy tree. Before cultivating the happy tree, you can mix garden soil, humus soil, well-rotted organic fertilizer and river sand, and mix it according to the ratio of 5:3:1:1.

2. Scientific fertilization.

In spring and autumn, the tree grows faster, about once a month to fertilize, fertilizer can choose compound fertilizer, for the plant to supplement nitrogen, phosphorus and potassium and other elements, you can also choose homemade fertilizer, such as rice water, bone meal or soybean cake. In summer and winter, the Happiness Tree goes dormant and needs to be fertilized or not fertilized.

3. Reasonable watering.

For the happiness tree placed indoors, the bottom of the pot must be raised, otherwise it is easy to accumulate water. The potting soil is dry and watered thoroughly, watered with enough water, generally under normal circumstances, raised indoors, watered once every 3 or 4 days. In dry weather, if the air is dry, it is necessary to reduce the watering time for a short time.

Be sure not to dry it without watering, pour it thoroughly, and it is best not to put a cushion plate at the bottom.

Here Xiaoyou will teach you the most classic four tricks, the first trick: the happy tree likes acidic soil; The second trick: ventilation is very important, and the happiness tree placed indoors must be frequently opened for ventilation; The third trick: temperature control; The fourth trick: rain is the best source of water for the tree of happiness.

1. Temperature: Phaseolus vulgaris prefers a warm and hot environment, and the suitable temperature for growth is 20-30.

2 Light: Phaseolus vulgaris is a light-loving plant, and it can also tolerate shade, full sunshine, and semi-shade environment3 Moisture: Cultivating Phaseolus vulgaris requires a relatively moist soil and display environment4 Soil:

For potted bean trees, loose and fertile, well-drained and breathable, and rich in organic matter should be used.

5. Fertilizer: In addition to adding an appropriate amount of rotted cake fertilizer and 3 multiple compound fertilizers to the cultivation soil, potted bean trees should also be continuously given top dressing.

1. The living habits of the happy tree, if you want to raise the happy tree well, you must first understand its habits, and the plants like the happy tree generally prefer high temperature and humid environments, and as long as the sun is sufficient, it is very easy to breed. And every May, June, July and August, it will bloom beautiful flowers, which has a good ornamental value.

2. The requirements of the happy tree for light, if you want to raise the happy tree well, sunlight is very important, whether it is an indoor or outdoor banquet, as long as the light is sufficient, it is very good to breed, if the indoor light is insufficient, you can also use the light to supplement, and it is also a good way to do it. In winter, you should place the tree of happiness on your balcony or in front of a sunny window, as long as the sun can reach it. In fact, the Happiness Tree is a kind of plant that likes sunlight and is shade-tolerant, and it is okay to store it for a period of time, but if it is placed in a shady place for a long time, it will cause the leaves of the Happiness Tree to fall off or turn yellow, and in severe cases, it will also lead to death.

3. The fertilizer and water management of the happy tree, whether it is any kind of plant, more or less needs some fertilizer and water. Therefore, it is also very important to breed happiness trees, fertilizer and water management, in the spring, summer and autumn seasons of each year, you can water the Xiangdan happiness tree every day, and once it enters the winter, it is necessary to reduce the supply of water. In addition, it should be noted that whenever happiness is to give timely nutrients before flowering, and when entering the peak growing season, fertilizer should also be applied every other week, try to choose fertilizer in the morning, and the fertilizer is best with low concentration cake fertilizer.

Fertilization stops in winter.

4. The temperature and humidity of the happy tree, the plant of the happy tree prefers a warm and humid environment, if it is placed in an indoor environment, the overall temperature is controlled between 18 and 21, such a temperature is conducive to growth, whether the temperature is too high or too low will affect the growth. Especially in the winter in the north, the minimum indoor temperature should not be lower than 5, if the temperature is lower than this, there will be frost damage.

Tips and tricks for raising a tree of happiness well:

1. Soil selection for happy tree breeding.

Because potting plants limit the nutrient area, the potting soil should be loose, fertile and permeable. Potted soil can be used humus (peat), vegetable garden soil, river sand, and well-decomposed organic fertilizer according to 5:3:

The ratio of 1:1 can be adjusted according to the situation. 1 Change the pot once every 2 years, and replace the nutrient soil to facilitate the growth of the plant.

2. Fertilization method of happy tree breeding.

In the growing season, the fast-acting liquid fertilizer can be watered once a month, and the potassium dihydrogen phosphate solution can be applied 2 or 3 times in a row after the Mid-Autumn Festival to increase the cold resistance of the happy tree plants, which is more conducive to its safe wintering. The temperature in summer should be higher than 32, and the temperature in late autumn and early winter should be stopped after the temperature is lower than 12.

Potted plants are turned over in April every year, and an appropriate amount of rotting cake fertilizer or 3% multi-compound fertilizer is added to the culture soil as base fertilizer, and the cake fertilizer water or multi-element slow-release compound fertilizer is buried once a month during the growing season. The Mid-Autumn Festival can chase 2 3 times potassium dihydrogen phosphate to increase cold resistance, the temperature in summer is higher than 32, and the winter temperature is lower than 12, stop top dressing.

3. The watering method of happy tree breeding.

Likes moisture. It is important to keep the seedbed moist during the nursery period. In the high temperature and dry season, more attention should be paid to the water content.

However, there should be no stagnant water to prevent the tree of happiness from stagnant water and rotten roots. When new shoots are sprouted in spring, watering should be properly controlled, and only need to keep the potting soil relatively moist to prevent it from growing too tall. Do not overwater in winter, otherwise it may cause water accumulation and root rot.

Happy tree likes moisture and is afraid of dryness, keep the seedbed moist at the seedling stage, and pay more attention to water in the high temperature and dry season. In order to prevent growth, you can control watering in spring to keep the potting soil moist, and spray regularly in summer and autumn, and not too much watering, so as not to accumulate water and rot roots.

When raising a potted tree, the bottom of the first pot should be high, otherwise it is easy to accumulate water, if a round water tray is placed below, a brick will be placed under the pot to cushion it, and there can be no water in the pot.

Before planting, a certain amount of fertilizer should be added to the soil as a basic fertilizer, so that the plant can have enough nutrients when growing, and the amount of watering should be paid attention to at ordinary times not to wet the soil, and some potassium fertilizer and phosphate fertilizer should be chased during the growth process, which can ensure that its branches are luxuriant.

First of all, the happy tree should be placed in a place with good air circulation and can receive sunlight, the happy tree will have to be watered too much, and during the development of the happy tree, we need to apply some fertilizer.

When raising the Happy Tree, we need to choose the right soil, and at the same time pay attention to its water and nutrients, it is best to put it in a sunny place, and it is also timely when encountering insect pests.