How does My e Home access the Internet through the switch?

My e-home currently needs to buy a wireless router, and then equip each machine with a wireless network card, so that two can access the Internet at the same time.

Only two machines can be connected to each other through a switch. Install a network card on each machine, and it is OK to pull the strip network cable to the switch

Set the IP of both machines to a fixed IP, or 1, which is generally 0).* is an arbitrary number of 2 254, and the IP of the cat is 1 by defaultI haven't used "my e home", is it also a cat dial-up Internet?

If so, fill in the IP of the gateway and DNS in the DNS of your telecomCheck the DNS at Start-Run-Input"cmd"- Type ipconfig all in the pop-up dialog box to see.

Each machine is set up with a broadband link, and my e-home doesn't have two, and each uses a different dial-up to access the Internet.

1. Hello all, you can connect the LAN port of the router to any port of the switch. After the switch is connected, the interface of the switch is the same as the LAN port of the router. For more questions, you can log in to Hubei 10000 to know!

It's as simple as connecting the LAN port of the router to any port of the switch. After the switch is connected, the interface of the switch is the same as the LAN port of the router. I don't know if I can help you.

The switch is not good, you should buy a small router for e-home broadband, and then connect the switch under the router, and you can access the Internet on multiple machines. Just look at the manual to set up the router, it's very simple!

This is an issue with the default gateway, right? I have encountered this failure in the past when debugging routes and VPNs.

Remote access to the application, contact Zhengzhou Yunhai.

Setup of the router.

Through the above method, we have successfully connected the computer and the router together, and then we can start to set up the router through the router's management interface. So how do you get into the main management interface of your router? 1. Open IE browser and enter 192 in the "address bar".

168. 1.1 After entering, a dialog box will pop up asking you to enter your username and password.

Enter the username and password according to the router's manual: e.g., admin, admin; 2. After clicking the "OK" button, enter the main management interface of the router. In the menu column on the left side of the main management interface of the router, there are a series of management options, through which you can manage and control the operation of the router.

Username and password: admin, admin". 3. Enter the router management interface The first time you enter the router management interface (you can also click the "Setup Wizard" option in the left menu in the main management interface of the router), a "Setup Wizard" interface will pop up, click the "Next" button; 4. WAN port settings In the pop-up "WAN port settings" interface, select the "PPPoe" option, and enter the corresponding user name and password in the "Internet access" and "Internet password" dialog boxes respectively.

Since ADSL can automatically assign IP addresses and DNS servers, neither of these is filled. Directly in the corresponding connection mode, select the "automatic connection" item, so that you can connect to the network as soon as you turn on the computer, which greatly increases office efficiency. 5. Set the DHCP function of the router DHCP is a special function of the router, using DHCP we can avoid the errors caused by manually setting the IP address and subnet mask, and also avoid the address conflict caused by assigning an IP address to multiple workstations.

The use of DHCP not only greatly reduces the time spent on configuring or reconfiguring workstations in the network, but also provides the flexibility to set the lease period of the address by setting up the DHCP server. Click the DHCP Server option on the left side of the page, and click Enable in the DHCP Settings window. The "Address Pool Start Address" and "Address Pool End Address" options are and respectively, note that x cannot be , y cannot be 255), here we can arbitrarily enter the 4th address segment of the IP address.

Click the "Save" button when you're done setting it up. After the above settings, as long as you open any computer in the local area network and start the Internet Explorer, you can share resources and surf the Internet.

HG522-C wireless modem, with routing function, if you connect the wireless router under this device, you must turn off the wireless function and routing function of the wireless cat.

This way, there is no conflict with wireless routing.

Cat-route-computer.

The cat is connected to the router using the WAN port.

Turn off the wireless function and DHCP service of the modem, just use it as an ordinary cat, set the username and password of the dial on the wireless router, and let the wireless router automatically dial the number. "

If the bandwidth of the child is combined with the parent (or the bandwidth limit can be reached without the child), the router is good.

If the loan of the child and the parent are calculated separately, then it is better to use the switch for dual login, otherwise the bandwidth of the child will be wasted (it cannot be evenly distributed to the mother).

Switches and routers can meet your needs The key to speed is in your bandwidth, that is, whether telecom gives you 1m or 2m, and the general ** line is 2m, and the maximum limit is 3m, which I haven't seen.

Switches are for commercial use because they are more secure. Routers are used by small businesses. Therefore, when choosing a router, don't try to be fresh, and it will be more difficult to deal with the switch in the future. The switch is far worse than the router's. The speed is the same, and a router is recommended.

It's all the same, I don't feel it, I don't believe in borrowing it.

When the wireless is on, it is a wireless switch.

It's just a 4M broadband, what's the toss! It's okay to wash and sleep!

Here's how to get into my e-home:

1. Set up the router, the back of the router has the IP address of the router: enter it into the address bar of the browser, and then press enter (enter) to open the login interface of the router.

2. Under normal circumstances, you can see the login interface, and enter the user name and original password as required (there is also a prompt on the back of the router).

3. But what is often opened is the setting interface of broadband home devices (optical fiber modems and other devices): the login interface of my e-home.

4. Enter my e-home, here is the interface for setting up broadband home devices. It is usually not advisable to modify the settings such as the user name or password here, and if you don't get it right, you will make an error, resulting in the loss of the original broadband data, and you need to report for repair. As long as the customer service is informed of this situation, if the other party can understand the cause of the failure, they can use remote operation to clean up the port data of the home broadband in the computer room and restore the default value.

Otherwise, maintenance personnel will be assigned to deal with it, and they will also call the server room to restore port data.

5. So, if the user logs in to the front-end device by mistake, how to deal with it? First, unplug the broadband home network cable from the WAN port of the router and connect only the power supply of the router (not the network cable).

6. In this way, enter it in the address bar of the browser: You can enter the login interface of the router normally. After entering, you can set the LAN port and change the default to save (the router will automatically restart to take effect).

7. At this time, insert the network cable into the WAN port of the router, re-enter the newly modified IP address in the address bar of the router, press enter (enter), and you will no longer enter the interface of the front-end device (IP address: , but enter the router's settings interface.

8. Actually, this is a very common problem, and many users do not know about this conflict situation and how to modify it. In order to improve this situation, many routers now factory will change the management (login) interface to a different IP address (not conflicting with the address) or change it to a domain name (logo can be used.

Extended information: A router is a device that connects various local area networks and wide area networks on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path. A router is the hub of the Internet"Traffic police"。

At present, routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet. The main difference between routing and switching is that the switch takes place at the second layer of the OSI reference model (data link layer), while the routing takes place at the third layer, which is the network layer. This difference determines that routers and switches need to use different control information in the process of moving information, so the way they achieve their respective functions is different.

1. Open the setting interface of broadband home devices (optical fiber modems and other devices): the login interface of my e-home.

2. Enter my e-home, here is the interface for setting up broadband home devices. It is usually not appropriate to modify the settings such as user name or password here, and you need to call ** for repair.

"My e-home" English name "one home" is a customer brand tailored by China Telecom to effectively meet the increasingly diversified and personalized communication and information application needs of families, and is the first family-oriented customer brand in China's communications market. On May 21, 2012, China Telecom's "My e-Home" brand was renamed "Tianyi e-Home".

How to enter the China Telecom Wireless Cat My E Home Settings page:

1. The LAN port of the computer is connected to the telecom wireless modem;

2. Open the browser and enter the IP address marked on the label behind the wireless modem into the browser address bar, and then you can log in to the optical modem settings page.

Your route is the same as the cat address, you unplug the network cable that connects the router, and you can enter the network cable to change the LAN address to In the future, even if the cat enters an address, you can directly enter the router interface.

How can I get off my e-house, please?

Set it up according to what you want, I don't know what you want.

You mean: Telecom gives you a router, then you buy a wireless router yourself, and then connect multiple machines to achieve simultaneous Internet access?

Then please read the manual of the wireless router you bought carefully, and it will be convenient to set up.

You have to know how a computer telecom is set up to access the Internet, assuming that the IP address is automatically obtained, then the WAN side of the wireless router is set to automatically obtain the IP address, and the LAN side is set to automatically assign the IP address.

Thank you for your question.

That's all for you.

Your new wireless router should have his exact steps on it.