Please teach you how to paint latex paint by yourself, and what are the relevant matters that need t

Steps. 1. Check the wall of the room that needs to be painted with latex paint, to see if the wall is solid and smooth, if the plastering layer of the wall has large cracks and holes, etc., it should be dealt with in time, and the holes can be filled with gypsum if the holes are small, if they are too large, they should be asked to redo by the developer.

Steps. Second, before brushing latex paint, clean the wall to be painted with a steel brush, to ensure that the wall is free of floating dust and floating soil, etc., after cleaning up the concrete interface agent on the wall stick, to ensure uniformity as much as possible, wait until 2 hours later to see if it is dry, and you can scrape putty after drying.

Steps. Third, the wall putty is generally scraped twice, if the flatness of the putty needs to be scraped several times, you can also consider scraping the plaster first and then scraping the putty, each time to scrape the putty should be spaced more than 2 hours before the next step of construction.

Steps. Fourth, 1-2 days after the putty scraping, the putty should be sanded, the grinding time period can be selected at night, the wall is illuminated with an electric light bulb, and the wall is smoothed while grinding.

Steps. Fifth, after the putty is polished, clean up the floating dust on the lower surface, and then you can carry out the construction of the primer, the primer must be painted evenly, generally brush it once, and so the primer can be dried after the next step of construction, the primer drying time is generally about 2-4 hours, depending on the primer.

Steps. 6. After the primer is completely dry, start to brush the topcoat, the topcoat should be painted on both sides, and each topcoat painting must wait until the first time is completely dry before it can be carried out. During the drying of the topcoat coating, pay attention to waterproofing and sunscreen, otherwise there will be problems with the paint film.

Precautions for brushing latex paint.

1. In order to prevent the floor from getting dirty before brushing latex paint, you can lay a barrier on the ground, or some waste newspapers, plastic sheets and unused clothes.

2. If there is a place that does not need to be painted with latex paint, a barrier needs to be attached to prevent it from being soiled when applying latex paint.

3. If the latex paint is not used up, the can has been opened, then it needs to be sealed tightly, in order to avoid its surface crusting and falling into the bottom of the tank, it can be stored upside down, so that it will be more convenient to use.

4. The paint drum is divided into two kinds, one is the hair roller, the other is the coarse nylon drum, the indoor choice is best to choose the hair drum, because the brush of the hair drum is more detailed, and the coarse nylon drum is generally used on the exterior wall.

5. If the roller coated with latex paint is still to be used the next day, it can be wrapped in plastic film without cleaning.

This first depends on how flat your wall is. If the wall is uneven, it also needs to be polished with plaster, and then painted with latex paint. to be able to paste wallpaper.

This is also to ensure the aesthetics of your wallpaper. The latex paint painted in the new house I just bought is very poor and easy to fall off. Unless you're buying a model home.

If this is necessary. The original wall had to be removed. Re-plastered and painted with latex paint.

Although there are home improvement companies that will contract all home improvement activities, whether it is to save costs, or to make some changes to the home living environment in the later stage, or to enjoy the fun of their own home decoration, many owners will choose to paint latex paint themselves. So how should you brush latex paint to be beautiful and generous?

The so-called "sharpening the knife does not mistake the woodcutter", to buy good tools to make the brush out of the wall more smooth and even, their own latex paint technology is generally not as good as professionals, so the choice of tools is more important. It is necessary to choose latex paint with high color saturation, so that it can withstand the wind and sun, and the shelf life is longer, and choose high-quality brushes to make the latex paint on the wall more uniform.

Before formal painting, clean up the uneven places on the wall and the places with stains and dust, if it is a secondary decoration, there are some nail holes on the wall, you should use putty to smooth it, and then wait for the wall to dry before painting. In the process of painting latex paint yourself, the basic treatment is the most important step.

Generally speaking, it is best to mix latex paint with about 20% to 30% of water, if you don't grasp the amount well, it is best to use a professional measuring tool to carry out, if the water is blended too much, it is difficult for latex paint to form a film, after stirring evenly, place it for about 20 minutes, so that you can eliminate the bubbles in the water and avoid small bubbles on the wall. Many people report that they encounter this problem in the process of brushing latex paint, that is, because this step is not carried out, first soak the construction tools to facilitate painting, and if they brush latex paint, they can use a two-sided painting method, first brush the primer, play a role in eliminating the bottom of the dust, and facilitate the subsequent painting, after the first brush, the interval is about three hours, as long as the wall has no viscosity, you can carry out the next painting, a total of two brushes.

In general, brushing latex paint is a very hands-on process, in addition to the basic painting steps to know the silver, the most important thing is to prepare the work, do more wall cleaning a few times, can make the process of brushing latex paint smoother.

You can get it for free

When decorating a house, we all know that we can't do without what we often say about decoration materials, and latex paint is one of them. A lot of people don't know! I'm struggling with these questions.

And the use of latex paint pay attention to the rough items!

How to brush latex paint?

1.The first step is to buy the right painting tools and brushes. tool to create a thicker coating, which conceals the original bottom color, while also ensuring the durability of the paint film and withstanding repeated scrubbing.

2.Before brushing latex paint, it is necessary to repair the seams and level them. Dust and dirt should be removed from the wall with a special detergent or clean water for cleaning the wall or glass, and it should be dried. If there are holes such as nail holes on the wall, putty can be used to fill them.

3.The painting method is to first use a tool to brush a "frame" around the wall, and then use a roller to roll inside the "frame". Paint is dipped in a roller and applied to the wall in a sequence ("W" or "M" shape), then the missing living area is filled, and then the left and right sides are rolled back and forth, and the painting is applied in a cross pattern back and forth.

4. The general decoration construction uses brush coating and roller coating, brushing and brushing has high labor intensity, and the general decoration is most of the roller coating, and the corners of the brushing are difficult to deal with. Spraying generally requires a professional construction team, the cost is high, and it is not suitable for individuals to operate, so I will not explain it here.

5. Roller coating and brushing method: the brush should be removed before use. First of all, you should use your fingers to smooth out the brush and clean the whole thing before use.

Wet the paint brush with water. When applying the paint, soak the brush halfway in the paint. It's a good idea to rub the brush back and forth on the edge of the bucket a few times after dipping to avoid too much dipping, but don't scrape too hard.

Precautions for the use of latex paint:

1.The general rule of painting is from left to right, from top to bottom, first inside and then outside, first difficult and then easy to dislike.

2.The speed of the paint brush should be consistent and the force should be uniform to ensure that the coating is uniform.

3.Do not brush back and forth too many times to prevent blistering or brush marks.

4.When brushing the top, the oil should be less, the action should be fast, and the thin brush should be repeated to prevent sagging.

5.Proper ventilation of the construction site should be ensured.

6.At the end of the brush application or the rest in between, the brush should be soaked in solvent or washed and dried.

There are many points that we need to learn when we use latex paint, so it is necessary to learn these things before using them. The above is how to brush latex paint and the precautions for the use of latex paint introduced to you today, and this is the end of it.

In the renovation, many owners are privately thinking about saving money for workers. I want to paint the walls by myself. But if you don't understand it, it's going to be bad.

SoHow to paint latex paint yourself？What should I pay attention to when painting?

1. Procurement of construction tools and tools to do a good job. Especially the brands with high quality brushes and paints are more popular. Since a quality product eliminates a uniform wall effect, latex paint can be highly saturated and can withstand repeated cleaning.

How to paint latex paint yourselfBefore painting, the wall must be subjected to a basic treatment. If there are bumps on the wall, it is essential to make the wall smooth. If there are stains and gray logs on the wall, it will be removed first.

If there are several nail holes in the wall, putty can be used. Gently. After cleaning, wait for the walls to dry.

3. According to a certain ratio, water is used in latex paint, the mixing ratio is about 20-30, too much water, latex paint will become weaker and cannot form a film!

How to paint latex paint yourselfMix the water and latex paint together and leave for about 20 minutes. It is the removal of air bubbles from the water. If you paint the wall without waiting, there will be small bubbles on the wall.

5. After the paint is ready, wet the construction tool. brush to keep the wool soft. The rolls can be pre-wetted and painted.

How to paint latex paint yourselfAfter the first painting, brush again every 2-4 hours and cycle like this. Some friends say that the concept of time is not strong, and they press it with their fingers. If it doesn't stick, you can repaint it.

1. The general rule of painting is from left to right, from top to bottom, from start to finish, it is difficult and easy at the beginning.

2. The running speed of the paint brush must be constant and uniform, and the force must be uniform to ensure that the coating is uniform and clear.

3. To avoid bubbles or brush marks, do not use too many brushes back and forth during the brushing process.

4. When brushing the top, the oil should be less, the action should be faster, and the brush should be brushed several times to prevent sagging.

5. Proper ventilation should be provided at the construction site.

6. When brushing teeth or intermediate brushing, the brush should be soaked in solvent or washed and dried.

You can get it for free

Latex paint is one of the many paints that are favored by owners because of its advantages such as health, environmental protection, diverse colors and simplicity. Let's take a look at itHow to brush latex paint well, what to pay attention to when brushing, I hope it will help you.

How to brush latex paint wellStep 1.

Get construction tools, good tools can do the job. Especially for brushes and lacquers, *** is preferred. Thanks to the quality of the product that gives a uniform effect on the walls, the color saturation of latex paint is high and can withstand repeated cleaning.

How to brush latex paint wellStep 2.

Before painting, we have to do a basic treatment of the wall. If there is a protrusion on the wall, we should smooth it; If there are spots on the wall, gray layers are piled up, clean; If there are some nail holes in the wall, you can use putty, patch, after cleaning, and wait for the wall to dry.

How to brush latex paint wellStep 3.

According to a certain proportion, the mixing ratio of water and latex paint is about 20-30%; If it has too much water, the latex paint will weaken and it will not form a film!

How to brush latex paint wellStep 4: God answers.

After mixing the water and latex paint with a wooden stick, let it sit for about 20 minutes. This is to eliminate air bubbles in the water. If you don't want small bubbles to end up on the wall, wait until the bubbles are gone.

How to brush the milk You Chunhui glue paint wellStep 5.

Once the paint is ready, you can wet the application tool. Especially with a brush that keeps the wool soft with your trouser hands. The rollers can also be pre-wetted for better brushing.

How to brush latex paint wellStep 6.

If you paint your own latex paint, it is recommended to use the double-sided brush method.

1. Brush the bottom knee first, so that it can improve the characteristics of the wall surface to improve the adsorption of the surface of the wall, then the effect will be better.

2. During the operation, if you feel that the wall is not smooth enough, or there are some small particles, you can use sand and water 600 to clean the wall slightly.

3. After the first time, brush every 2-4 hours and cycle like this. Some buddies will say that the concept of time is not strong, so you can press it with your finger and if it doesn't feel sticky, you can paint it again.

1. The general rule is from left to right, from top to bottom.

2. The operating speed of the brush must be constant and uniform, and the force must be uniform to ensure uniform coating.

3. Don't apply too much brush from one side to the other to avoid foaming or leaving brush marks.

4. When brushing the upper part, the oil should be small, the action should be fast, and the brush should be brushed many times.

5. The construction site must be well ventilated.

6. When resting, the brush should be immersed in solvent or washed to dry.

You can get it for free