Can you cut the mobile phone card yourself How to cut it

If you are using a vivo mobile phone, if the size of the SIM card and the mobile phone card slot is not suitable, it is recommended to go to the local business hall and the staff will use a special card cutter to help cut the card or replace the card.

1. You can buy a special card cutting machine, similar to a stapler, and there are different models of card cutters for different cards.

2. Find the matching card cutter, put the mobile phone card into the groove of the card cutter to adjust the position, and then press the switch.

3. Pour out the mobile phone card again, at this time it is best to take the card with the other hand, so as not to drop it and can't find it, as shown below.

4. If there is no card cutter, you can manually prepare a pencil and ruler to measure the cutting range, be sure to measure accurately, and it is best to find a standard card that has been cut.

5. Then use scissors to cut according to the range line just reserved, pay attention to be careful, do not damage the internal chip of the mobile phone card.

OK. Method 1: You can use the Nano SIM card cutter to cut the card, align the missing corner of the SIM card with the missing corner of the card cutter, insert the SIM card into the card slot completely, and adjust the golden metal part of the SIM card to the middle

Be sure to pay attention to the position of the chip to avoid cutting the core.

Hold the card cutter with both hands, close it quickly and forcefully, and be sure to "quickly force" and "close to the end", so that the edge of the cut card is neat.

Method 2: Directly bring your ID card to the business hall to replace the card, now the card replacement is a three-in-one card, any mobile phone can be used appropriately, and the card replacement service is free.

Method 3: With the help of pencils, rulers and scissors, use rulers and pencils to carve out the size of the sim, and use scissors to cut.

The standard SIM of the mobile phone can be reduced to a micro SIM card and a nano card through the card cutter. The Micro SIM card can also be reduced to a Nano card by means of a card cutter. That is, large cards can be cut into small cards, and vice versa, can only be achieved through card sleeves.

Ways to reduce cards:

It is very simple to cut a small card from a SIM card, you can cut the card directly with the help of the card sticker, use scissors, or use the Nano SIM card cutter to cut the card. Because the thickness of the SIM card and the SIM card is exactly the same, but the size is different, and the mobile phone with the general design of the small card will be attached to the box, the small card sticker, we only need to cut the SIM large card, along the card with scissors, as long as the careful cutting, there will be no problem, very simple.

Of course, there are special card cutters on the market to buy, if you buy a card cutter in order to cut a small card, it is a bit of a waste. However, you can give the mobile phone store to help you reduce the card.

Of course, if you are already a small card, you can buy the corresponding card tray, and you can put it into the big card holder, so that you can use any mobile phone by the way.

If you don't have a card cutter, don't cut it yourself.

Card cutting process: 1. Measure the size, first measure the length and width of the chip.

<>3. Press the drawn line with a steel ruler, and use a paper cutter to engrave the excess part along the edge of the steel ruler along the stove.

4. Grinding, the card that has just been cut is surrounded by burrs, so it needs to be polished.

5. Before cleaning the machine, in order to avoid short circuit, gently scrape the black edges of the arrows shown in the diagram with the tip of a knife, and then wipe the surface of the chip with a paper towel.

6. Put the polished small card into the card sleeve, and you can start the mobile phone.

First, if you buy a small card of the mobile phone, and the mobile phone card is still a large card, then cut the card, before cutting the card, you can first back up the content of the mobile phone card and then search for filial piety to cut it, the same is to go to the business hall to cut, the business hall cut card is free, and the safety of the world change, it is not recommended to buy a card cutting machine to cut the card, because that is too expensive, as long as you use it carefully to dismantle the times.

Second, the mobile phone has several SIM card sizes. In fact, there are three types, namely: standard card, small card, and micro card.

1. Standard card: the size is 25mm 15mm, which is the card used by most mobile phones, which is the so-called big card.

2. Small card: micro SIM card - the size is 12 15mm, which is the size of the chip on the standard card, and this kind of card is a small card.

3. SIM card.

Micro card: Nano SIM micro card is currently the smallest, the size is only 12mm x 9mm, now only iphone5 will be used more after using this small card, the smaller size is to make space for a certain part of the mobile phone, more help the mobile phone to develop in the direction of thinner and lighter.

Nano SIM micro SIM card.

1. The tools needed are a pencil, ruler and scissors. The whole cutting process starts with finding the center point. And, at present, according to the experience of cutting cards, if you cut these values, 7mm, 8mm, 7mm, mm, you can smoothly put the card in the microSIM card slot.

You can use a ruler and a pencil to mark out the scale, and then use scissors to deal with it, it will touch the chip area on the card, don't feel distressed and cut it directly, these places will not affect the use.

2. Use a pencil to draw lines according to the scale.

3. Carefully cut the card.

4. After cutting, put the card into the microsim card slot and use it.