-
Before choosing a mobile phone, it is recommended to understand some relevant parameters, so as not to be cut leeks!
1. Processor.
Flagships: Apple A15, Dimensity 9000, Kirin 9000 9000E, Snapdragon 8 Gen 1, MediaTek Dimensity 8100
Mid-range: Snapdragon 870, MediaTek Dimensity 1200 series.
Tips: Give preference to flagship and mid-range, there are also processor models on the market like Snapdragon 4 series and MediaTek P, which can be selected or less!
2. RAM running memory.
1. Under the same circumstances, the larger the memory, the faster the running speed, and the less likely it is to freeze.
2. It is recommended that the bigger the better, if you often play games, or don't like to clean up the background: it is recommended to start with 8G!
3. ROM storage.
1. ROM storage represents the storage and opening speed of the phone.
2. It is recommended to start with 128G storage, and go up to 256G and 512G (most of them start at 128G now) if the budget is sufficient
3. Flash speed ranking: >
Fourth, the camera.
1. The higher the pixel, the better, and the formation is also related to the anti-shake system, computational imaging algorithm, mobile phone color, sensor, etc.
2. The more cameras the more photo modes are supported, but the actual photo still depends on the performance of a single camera.
5. Screen. A good screen will be more comfortable to use, and now there are LCD and old Weiying OLED
1. Advantages of LCD: relative eye protection, long service life; Disadvantages: The upper and lower bezels of the fuselage are large, and the screen cannot be installed to serve fingerprints.
2. Advantages of OLED: the display effect is more vivid and full, which can make the body thinner and lighter; Disadvantages: Under the premise of relatively short life, the same size and resolution, the display effect is not as clear as LCD.
However, OLED screens with DC-like dimming and high-frequency PWM dimming are less harmful to the eyes.
6. Battery. 1. The battery determines the battery life, and most of the batteries are now above 4000+ mAh.
2. The greater the charging power, the faster the charging, currently 150W is the fastest, it is recommended to choose fast charging. (OPPO officially announced that there will be 240W).
3. The best charging time is between 20-80%.
4. Try to use the original charger and charging cable.
-
Answer: First call 10086 to manual service consultation, after providing it with your GPRS parameter setting request, the salesman will transfer the voice platform to reply, if necessary, you can also press the No. 2 key after the end of the voice prompt to reply, so that you can set GPRS parameters in a timely and accurate manner!
Set the three network parameters in order. 1. Set the "MMS Receiving" setting first. 2. WAP Internet access and "Fetion Receiving" settings. 3. "CMNet Internet Settings".
-
HK tinkering GF will be wonderful.
-
The first thing to look at is the CPU. Any task is handled by the CPU, which is the core of the phone. This is the most fundamental place.
The same goes for ROMs, the bigger the better. is the directory where the application is installed.
The PPI pixel density of the screen affects the fineness of the mobile phone screen, of course, this is also related to the material and the arrangement of sub-pixels. To put it simply, high resolution is definitely better. Now the resolution of 1280 720 is the mainstream.
Needless to say, the camera is a big deal. Generally, the pixel height is better, but the most fundamental thing is the aperture size and the quality of the image sensor.
-
CPU frequency, number of cores, RAM, pixels, lens pixels.
-
First of all, you need to consider the operating system, and then choose the appropriate screen size, pixel size, CPU core number and frequency size, memory size (including ROM and RAM, RAM relationship running rate, ROM relationship storage), of course, you need to consider the brand, and the rest should be done by yourself.
Different people have different needs, for example, if you like to watch movies on your mobile phone, then you need to look at the screen size, resolution, etc. >>>More
Use the byval keyword to indicate that the parameter is passed by value, but your first argument is written by byref, which is passed by address, and the second argument is written at nothing, and it is also passed by address by default.
To be clear, only"Value parameters and variable parameters"How can I help you?
This one was tuned out by myself, using a granite procedural texture. >>>More
Are you using a browser? Is it a version of the browser?
If there is a problem with the structure or style of the writing, or if there is an incompatibility especially IE6, 7, 8 >>>More