Lenovo Server RD630 Install the 2008 system boot disk

Here's how to install the system on the Lenovo server:

Put the system disc into the server CD-ROM drive, the server restarts, and press the Ctrl and S key combination to enter the BIOS panel when the computer is turned on;

Use the Tab key in the BIOS panel to switch to the Bootpriority option, and use the up and down keys in that option to switch to the local optical drive;

Use the Enter key to select the name of the local optical drive, and press F5 to move the optical drive to the first position.

Press F10 to save and exit, and you can enter the disc installer;

Enter the disc installer, if there is an array, you need to load the array driver to identify the hard disk, select the partition where you need to install the system, click OK, and then click Next to install the system according to the prompts.

If you need the driver and image file, I can send you a copy.

Do you mean to install the 08 system with a boot disk? With the array can not be used boot disk,You can also match it in the boot disk,You can't partition it in the boot disk (if your hard disk is relatively large),After matching the array, follow the boot disk step by step,It will prompt you when to put the system disk,Put the system disk in it can be completed,But some systems have to enter the BIOS to set the IO port and IDE。

Dear Lenovo users, hello!

Please call Lenovo Service** or go directly to your local Lenovo service station for consultation.

IDEA Forum.

Think Forum.

Lenovo Community.

Dear users, hello!

This is the Lenovo FAQ knowledge base, which has a relatively complete answer and know the process and analysis:

Consult Lenovo 24 hours a day to interact with engineers in the Lenovo community if you have any questions:

Find a 4G or 8G USB flash drive, format it as FAT32, and activate its partition in Disk Management so that it can boot at a loss, and then copy all the files in the server 2008 system installation disc into the root directory of the USB flash drive.

If the server is configured with an array card and the RAID array is enabled, you need to put the corresponding array card driver on the server official**on the USB flash drive, and choose to load the array card driver Bu Xian during the installation process!

No boot disk is required during the installation process!

First of all, in line with the principle of learning from each other, please try to describe the problem as clearly and easily understandable as possible, and be clearly organized, if possible, please provide screenshots or ** in order to analyze the problem, thank you for your support and understanding!

Secondly, no matter what kind of mentality you are asking here, please try to search before asking a question, and it is not that someone will answer the reward, but someone will answer the question with your heart, everyone is not a professional answerer, you have your own work and life, and you are using fragmented time to provide a little help to others on the Internet, do a good deed every day, accumulate good deeds, please respect people, just like self-esteem and self-love!

Here's how to install the system on the Lenovo server:

Put the system disc into the server CD-ROM drive, the server restarts, and press the Ctrl and S key combination to enter the BIOS panel when the computer is turned on;

Use the Tab key in the BIOS panel to switch to the Bootpriority option, and use the up and down keys in that option to switch to the local optical drive;

Use the Enter key to select the name of the local optical drive, and press F5 to move the optical drive to the first position.

Press F10 to save and exit, and you can enter the disc installer;

Go to the disc installer, select the partition where you want to install the system, click OK, and then click Next to install the system according to the prompts.

Take the 2003 server version as an example, you need to install the hard disk array driver first (there will be a prompt to press f6), and then officially install the server system, and you can use it after configuration.

Hello, due to the special nature of the server product and the security of the design guide data, it is recommended that you call 800-810-8888 (if the 800 service area is not opened, please call 010-82879425) to contact the product engineer and let the engineer guide you to operate.

After the RAID is done, there should be a boot disk dedicated to installing the system, right? Because the system kernel may not have a RAID card driver in question! Put the boot disk in it, and then follow the prompts to install it!

1. Insert the Windows disc and restart the computer.

2Select the language setting and click Next.

3. Fix your computer.

Dear Lenovo users, hello!

If your problem is not solved, you can complain, put forward your valuable opinions, and then transfer to manual service.

Lenovo RD640 server should be equipped with a boot CD, boot the computer with the boot CD, configure the RAID mode first, and then set the win2008 system to be installed according to the bootloader, in the case of prompts, insert the win2008 installation CD, complete the installation of the new system, I wish you success.

If the impression of the navigation disk is in Chinese, you can enter or confirm it according to the prompts.

I don't understand the sticker and ask.

Dear Lenovo users, please install the hard disk array driver first, and then officially install the server system, and you can use it after configuration.

Thank you for your support and trust in Lenovo, and I wish you a happy life.

Hello, you need to install the array driver first and then install Windows 2008

It is recommended that you contact Lenovo customer service for a more in-depth solution.