How Do I Turn on a Wireless Router TFTP Server?

1. TFTP server routing settings 1. Load from flash memory:

During the configuration process, the Flash is generally configured to be the first location to mount the Cisco router IOS image, and the upload from the flash will not be affected by network problems, even if the router cannot connect to the TFTP server normally due to network failure, the router can mount the iOS image normally.

it168#configure terminal

it168(config)#boot system flash my-router[ctrl-z]

it168#copy running-config startup-config

When using the boot system command, you need to enter the boot system command in global configuration mode and the location and image file name that needs to locate the Cisco router iOS.

2. TFTP server routing settings 2. Load from TFTP server.

After using the boot system to define the loading of iOS from the TFTP server, if the loading of the iOS image from the flash fails, the iOS image can be loaded from the TFTP server.

it168#configure terminal

it168(config)#boot system tftp ios-bak

it168#copy running-config startup-config

3. TFTP server routing settings 3. Load from the ROM.

If both Flash and TFTP fail and the Cisco router iOS image cannot be mounted properly, we can only load it from the ROM, and the IOS image loaded from the ROM can only execute some of the commands and functions of the iOS.

it168#configure terminal

it168(config)#boot system rom[ctrl-z]

it168#copy running-config startup-config

Tips: When using the boot system command, be sure to pay attention to the order of the input command, generally in the order from flash, tftp, rom, etc., in addition, after changing all the configurations, the configuration must be copied to NVRAM, otherwise when the router is restarted, the Cisco router ios these configurations will not be stored and effective.

Don't try this.,Every time I turn on this tftp router it's a state of suspended animation.,I can't connect to the network directly.。

And I personally think that the router is not easy to use, so I will change it to a new one, so why bother so much effort.

If you don't want the signal to be enough, you can go directly to set up a router wireless bridge, and the router will be used at the same time for two days.

And it can also make it easy for me to manage wireless Internet access devices connected to wifi, which is very cool.

I always feel that the function of the router is lacking, and the function of this portable wifi can just make up for the loophole, which is still good.

So it's best to set up your router's TFTP server by watching tutorials on the Internet and then setting it up slowly.

In addition, it is best to do it under WinXP, WinNT, Win2000, Win98, Win95 and other operating systems.

If it is a 360, you must go under the 360 portable wifi drive.

Win7 system has its own FTP server, but the default is not to enable the TFTP server function.

The TFTP server is turned on when needed, and the TFTP server is mainly used for simple file transfer between the client and the server.

But users who have recently used the win7 system don't know how to open the tftp server, open it in **? The following will introduce how to open the TFTP server in Win7 system and how to open the TFTP server.

The steps are as follows: <>

2. The first line in this means that the home directory of face-to-face tftp is this.

3. The second line is the listening IP address of the current server.

4. The content of the first tag TFTP server is the log of the current server.

5. Click the setting below and then pop up the window, the main setting options are only the port of TFTP, the default directory of TFTP, and whether the DHCP service is enabled.

6. DHCP is mentioned here. Some routers or other embedded devices allow the use of "HyperTerminal" connection during the flashing process, but there is no IP address, and the IP address cannot be set, so you need to open the DHCP server to connect to the embedded device.

7. If the embedded device supports automatic upgrade, after the tftp server is turned on, the device will automatically download the file system from the **bin on the tftp server, if it does not support automatic flashing, you need to enter some commands.

tftptftp》get 《download file》

tftp》put 《upload file》

tftp》q

The above is how to open the TFTP server in the Win7 system, and the method of opening the TFTP server, so that you can use the TFTP function normally. I hope I can help you here.

If you are not familiar with TFTP servers, you should be familiar with FTP servers. It's just that it can't be started locally, so go to the tftp server to find it. Currently, you need to configure the TFTP server IP first.

And it's set up by yourself, with a tftp server with your router iOS.

To put it simply, the router boots up from the network and mounts the operating system of your TFTP server.

TFTPserver is a machine that provides FTFP services.

If you don't know this, your router will definitely not be able to boot from TFTP.

After the router starts, it is generally found in the flash menory to start the router by default, if the files in the flash are damaged or lost, go to the tftp server to find, if you can't find it, start the mini ios in the rom, this can be said to be a few solutions for the router to start, the last two can be understood as candidates.

When the router is looking for iOS files on TFTP, the router needs to be connected to this TFTP server, which can be a computer, and it is a TFTP server after installing TFTP Sever. They must be in the same network segment.

Router E0---PC (install tftpsever).

Here's how to install the FTP client under Win7:

1. Enter the control panel: start-control panel;

2. Access programs and functions;

3. Click to turn on or off the Windows function;

4. Check the TFTP client and TFTP server;

5. Restart the computer.

The specific opening method of the TFTP server of the Win7 system.

Once you have set it up, you can enter the dos state (start typing cmd into dos) and enter the :tftp command.

c:\>tftp

Files are transferred to or from a remote computer running the TFTP service.

tftp [-i] host [get | put] source [destination]

i Specifies the binary image transfer mode (also known as octal). In binary image mode, byte by byte.

Move files. Use this mode when transferring binary files.

host specifies a local or remote host.

get transfers the file destination on the remote host to the file source on the local host.

PUT transfers the file source on the local host to the file destination on the remote host.

source specifies the files to be transferred.

destination specifies the location to which you want to transfer the file.