The emergency boot system enters the Welcome page after what is the reason for the blue screen

Have you installed anything lately?

Press F8 to enter safe mode and uninstall the recently installed software.

If you have a problem with the memory module, you can use an eraser to take a look at the memory module. If you really can't do it, just install the system.

Don't think about why, just install the system.

Turn on the machine and press the F8 security mode to go in, or use PE to go in, test everything out, and then reinstall the system.

System problems,Find a disc to reinstall the system is OK,If you install the system,There will still be a blue screen,You have to check the hardware,Generally, the hard disk has bad sectors,The memory module is unstable will appear to find a problem。

You also have a **, at least a blue screen**, otherwise who can tell what the problem is?But let's try it anyway, first reset the system boot with the PE system and see how it goes.

,Unplug the memory,Graphics card,Take it like a leather wipe gold finger part,Wipe it bright and then install it,It's still not possible to reinstall the system。

Use PE's MHDD to detect whether the hard disk has bad sectorsDetecting memory modules.

Copy the drawings and important materials to the D drive and reload them.

The system is broken, reinstall it.

Hello!First of all, the following answers are not network replication, but are the essence of my practice and communication!

The reasons for the blue screen tend to focus on incompatible hardware and drivers, problematic software, viruses, etc. (The above ** is usually caused by a faulty driver or system service.) Suggestion:

Please troubleshoot the resolution as follows:

1. Feel the temperature of the CPU. Whether it is too high. Look at heat dissipation.

2. Whether the hard disk connection is loose?After there is no abnormality, check the hard disk for error

3. If there is a virus in the system, it is recommended to scan and disinfect the virus in safe mode

4. Try to restore the BIOS to its factory state

5. Is the driver of the hardware installed successfully after installing the system?

6. It is best to reinstall the operating system first

7. If there is still a problem after reinstalling the system, it is very likely that the hardware is incompatible

8. Consult with the merchant or friends who are familiar with the computer, maybe they will help;

9. Good luck!

Hope to help you.

Go to PE to repair the partition table, if it is because the C disk is too small, use the partition tool to make the C disk larger, if not, it is recommended that you check the hard disk, it is estimated that there is a problem with the hard disk.

The memory is overheating, just wait a minute.

You can open the settings when you turn on the computer, restore the settings to the default, try to remember to restore and save later, if it still doesn't work, find a professional to reinstall the system.

System Problems The system files were deleted by you, and you can reinstall the system.

The system is broken, reinstall it again.

Go to a computer repair shop and find someone to fix it!