How to set up Mercury MW320R route bridging?

Required tool material: Mercury MW320R router.

Here's how: <>

1. Connect the computer to the sub-router, log in to the management interface of the sub-router, and click Advanced Settings in the upper right corner of the page.

2. Click Wireless Settings - WDS Wireless Bridge.

3. Click Next.

4. The router will automatically scan the surrounding signal, find the signal of the main router, and click to select.

If you can't scan for the primary router signal, reduce the distance or obstructions between the routers.

5. The router will automatically prompt you to enter the wireless password of the main router, please enter it correctly, and click Next.

6. After connecting the signal of the main router, set the wireless network name and wireless password of this router, and click Next.

Note: If you do not need to implement wireless roaming, you can set the wireless name and password of this router to be different from the main router.

7. Change the IP address of the LAN port of the router.

Change the LAN port IP address of the local router and the primary router in the same network segment and do not conflict, and click Next.

8. Confirm that the configuration information is correct and click Done.

9. Observe the WDS status in the upper right corner, it is connected, which means that the WDS bridge is successful.

10. Disable DHCP: Click Network Parameters - DHCP Server to close the DHCP server.

The first one is connected according to the instructions to ensure that there is Internet access and wireless network, and the second one is plugged into any port of the first one with a network cable, and the other end is plugged into any port of the second one to be used.

With the Mercury MW305R wireless router, go to the wireless bridge to the WiFi signal of another wireless router; Once the bridge is set up, the wireless network can be expanded.

coverage. In this article, I mainly introduce the Mercury MW305R wireless router wireless bridging.

How to set it up!

1. Scan the wireless signal.

1) Click "Next".

Click "Next".

2) At this time, the Mercury MW305R router will automatically scan for nearby wireless signals, please find the wireless signal of the main router in the result (in this example: Zhangsan), and then click "Select".

Select and connect to the wireless signal of the main router.

3) Enter the wireless password of the main router and click "Next".

Enter the wireless password of the primary router.

2. Set the wireless parameters of MW305R.

Set the "Wireless Name", "Wireless Password" - click "Next Moment".

Set the wireless parameters of the MW305R.

Note the problem: The "wireless name" and "wireless password" here are recommended to be set to be consistent with the wireless name and wireless password on the main router, so that wireless roaming can be realized.

3. Modify the LAN port IP address of Mercury MW305R.

Modify the LAN port IP address of Mercury MW305R!

Modification Principle: Important Notes:

After modifying the LAN port IP address of the MW305R, you need to enter the modified IP address in the browser to reopen the setting page of the MW305R. In this example, you will need to enter it to log back in to the settings screen of the Mercury MW305R. Wanton.

2) Click "Done".

Mercury MW305R (V4-V7) Router Bridging Setup Complete!

With the Mercury MW300R wireless router, go to the wireless bridge to the WiFi signal of another wireless router; After the bridge is successfully set up, the coverage of the wireless network can be expanded. In this article, I mainly introduce how to set up the wireless bridging of the Mercury MW300R wireless router!

Here you need to view and record the channel, SSID, MAC address, PSK password and other information of router B, because these information will be used when configuring router A and C later.

1. Enter the management interface of router B, click "Wireless Settings" - "Wireless Basic Settings", and view and record the "SSID" and "Channel" information.

2. Get the encryption method and PSK password under "Wireless Settings" - Wireless Security Settings.

1. Change the IP address of the LAN port: Click "Network Parameters" - LAN Port Settings on the management interface of Router A, modify the IP address to be different from Router B (to prevent IP address conflicts), for example, save, the router will automatically restart.

2. Enable WDS function: After the reboot is completed, log in to the wireless router A again with the changed LAN port IP address, and check "Turn on WDS" in "Wireless Settings" - Basic Settings".

Select the SSID number of router B in the list of scanned signals, as shown in the figure below MW300R B, and click "Connect".

Set the channel to be the same as the B router channel.

Set the encryption information to be the same as the B router, save.

4. Turn off the DHCP server: Click "DHCP Server" and then select "Disable" - Save", and then the router will automatically restart.

At this point, Router A has completed the WDS bridging setup with Router B, and the employees in department A can directly connect to Router A's wireless network to access the Internet.

Adhering to the company's own advantages, Mercury always adheres to the principle of "high quality, high stability, and high cost performance", and adheres to the guidance of user needs.

How does the MW313R router wirelessly bridge? Here's what I've put together some of the information about the Mercury MW313R Router Wireless Bridge.

Mercury MW313R Router Wireless Bridging Steps.

1. Confirm the wireless parameters of the main router Confirm the wireless signal name, wireless password and wireless channel of the main router.

In this example, the following parameters are used:

Note: The main operations of Wireless Bridging (WDS) are done on the secondary router, and only the wireless channel of the main router needs to be fixed.

Mercury MW313R Router Wireless Bridging Steps.

2. Modify the IP address of the LAN port of the secondary router Connect the computer to the secondary router, log in to the management interface of the router, click Network Parameters >> the LAN port settings, and modify the IP address.

If the IP address of the primary router is, then the secondary router is changed to, save and restart the router.

Mercury MW313R Router Wireless Bridging Steps.

3. Set up a wireless bridge1. Wireless bridging setting and turning on WDS scanning signal

Log in to the router management interface with the modified IP address, click Wireless Settings >> basic wireless settings, set the same SSID number and channel as the main router, check Turn on WDS, and click Scan.

Note: If wireless roaming is not required.

You can set the wireless name and password of this router to be different from the main router.

2. Select the main router signal

Find the wireless signal of the main router in the list of scanned APs, and click Connect, as shown below

3. Enter the wireless password of the main router

Select the same Key Type as the primary router, enter the wireless password of the primary router in the Key field, and click Save.

4. Set the wireless password of the secondary router

Click Wireless Settings >> Wireless Security Settings, select WPA-PSK WPA2-PSK AES, fill in the same wireless password as the main router in the PSK Password field, and click Save at the bottom of the page.

Eggplant Wide Mercury MW313R Router Wireless Bridging Steps.

4. Confirm the success of the WDS On the management interface of the router, click Running Status, observe the Wireless Status >> the WDS status, and display Success, which means that the bridging WDS setting is successful.

Mercury MW313R Router Wireless Bridging Steps.

5. Shut down the DHCP server Click DHCP server.

DHCP Service Settings, DHCP Server Select Disable, and click Save.

At this point, the wireless bridging setup is complete. The wireless terminal is connected to Zhangsan, and the wired computer is connected to the LAN port of the main and secondary routers to access the Internet. During terminal movement, automatic roaming between the primary and secondary routers can be implemented.

1.Mercury MW313R router how to modify wireless.

2.Mercury no router MW313R how to bridge.

3.How does the Mercury MW313R router be a wireless AP

With the Mercury MW320R router, go to the wireless bridge to the wifi signal of another wireless router; After the bridge is successfully set up, the coverage of the wireless network can be expanded. In this article, I mainly introduce the bridge setting method of Mercury MW320R router!

Steps. 1. Enter the bridge settings page of MW320R.

1. Enter "Login Password" in the browser and enter "Login Password" in the jump page to log in to the setting interface of the MW320R router.

Enter the Mercury MW320R router setup interface.

2. Click "Advanced Settings".

Turn on the advanced settings of the Mercury MW320R.

3. Click "Wireless Settings" - WDS Wireless Bridge".

Turn on the wireless bridging settings for the Mercury MW320R.

Steps. 2. Set up the MW320R router to bridge the wireless signal.

1. Scan the wireless signal.

1) Click "Next".

Click "Next".

2) At this time, the Mercury MW320R router will automatically scan for nearby wireless signals, please find the wireless signal of the main router in the result (in this example: Zhangsan), and then click "Select".

Select the wireless signal of the primary router.

3) Enter the wireless password of the main router and click "Next".

Enter the wireless password of the primary router.

2. Set the wireless parameters of MW320R.

Set the "Wireless Name", "Wireless Password" - click "Next".

Set the wireless name and password for the MW320R.

Note: It is recommended that the "wireless name" and "wireless password" here be set to be consistent with the wireless name and wireless password on the main router, so that wireless roaming can be realized.

3. Modify the LAN port IP address of Mercury MW320R.

Modify the LAN port IP address of the Mercury MW320R.

Modify the principle of which to bring the chop:

Important Note: After modifying the IP address of the LAN port of the MW320R, you need to enter the modified IP address in the browser to reopen the settings page of the MW320R. In this case, you will need to enter it to log back into the Mercury MW320R settings screen.

2) Click "Done".

Mercury MW320R Router WDS Bridge Setup Complete!