If the router is placed in the living room, there is no signal in the bedroom

It's normal, but the partition wall is very bad for the signal. The signal penetration of a normal wireless router is not good, and it will be weakened a lot after one wall, not to mention two walls.

Try to put the route in a place with fewer obstacles, the router is a wall, the signal is good, see if your router is used for too long to transmit the wireless weakened, it is recommended that you buy a new one, so there is a problem, now the router signal transmission is OK, look at Mercury's will know that there is a wireless transmission power option in the router, change to the strongest try, the frequency bandwidth is adjusted to the maximum, in addition, it is best to specify the transmission channel, do not choose automatic, choose the channel with the best signal and then save.

There is an option for wireless transmission power in the router,Change to the strongest try,Adjust the frequency bandwidth to the maximum,In addition, it is best to specify the transmission channel,Don't choose automatic,Choose the channel with the best signal and save。

Try to put the router in a place with fewer obstacles, the signal is good if the router is separated by a wall, see if your router has been used for too long to transmit the wireless weakened, it is recommended that you buy a new one, so that there is a problem, and now the router signal transmission is OK.

A router, also known as a gateway device, is used to connect multiple logically separated networks, and the so-called logical network represents a single network or a subnet. When data is transferred from one subnet to another, it can be done through the router's routing function. Therefore, the router has the function of judging the network address and selecting the IP path, it can establish a flexible connection in the multi-network interconnection environment, can connect various subnets with completely different data packets and media access methods, the router only accepts the information of the origin server or other routers, and belongs to a kind of interconnection device at the network layer.

It is recommended to use a high-power network card such as Kawang to receive signals, or add a wireless AP The power of the AP is higher than that of the general wireless router, so that there is no wireless dead end in your own home.

If the router is separated by a wall, the signal is very bad, see if your router has been used for too long to transmit the wireless weakened, it is recommended that you buy a new one, so that there is a problem, now the router signal transmission is OK, look at Mercury's.

It's normal, but the partition wall is very bad for the signal.

The router at home is in the living room, but the bedroom can't receive the signal, how to solve this problem? The layout of the home network varies, and although the area of a family is not large, many families have a poor network wifi signal. Today I will give some solutions to the problem that the router has no signal in the living room or bedroom.

This method mainly solves the problem that the wifi signal is good at the beginning, slowly slows down, and then the signal is unstable, or even the signal becomes worse.

This is mainly because the equipment used is of poor quality or too cheap. The WiFi signal can be boosted using a federated network, such as using an AC+AP network or using a trunk line to boost the WiFi signal. AC+AP networking can effectively enhance the WiFi signal, but there are disadvantages such as high networking cost and slow signal switching speed, but the advantages are also obvious, such as suitable for large bungalows or villas.

Switch places. If you don't want to increase your budget, you can try changing the location of the router, such as away from radiating devices and signal testing, to choose a more suitable location for the router. I'm not talking about checking the router itself, but checking when you bought it.

Some people have used the router for five to six years and it looks new, but it really doesn't meet the requirements of the network. You know, the current network is basically fiber-to-the-home, operators can provide users with higher and higher bandwidth, users often update their mobile phones, support higher and higher WiFi protocols, but it is the router that is relatively backward on the central link, and the signal coverage is understandable. In fact, the performance of routers launched by many domestic manufacturers is very domineering, and the number of antennas and WiFi protocols are maintained at a relatively advanced level.

**Most of them are concentrated around 300-600 yuan, which is not very high. So, if you have a really old router at home, maybe the cheapest thing to do is to buy a new one, and the signal problem can be solved immediately. Nowadays, routers have become very user-friendly for the convenience of users.

For example, the Xiaomi router even has a special app to adjust to enable consumers to make the relevant settings in a simple and easy-to-understand graphical interface. One of the settings that often needs to be turned on is the through-the-wall function. Now it's basically a standard feature.

It would be better when his flare gun was turned on. Corresponding improvement in signal strength.

1.The first is to lay out the network cable in the room in advance when decorating;

2.The second is to replace the common wireless router with a PoE switch and install it in a weak current box;

3.The third is to replace the ordinary network socket with an AP panel that can transmit WiFi signals.

You can adjust the wireless transmission power of the router to the maximum, or you can change to a relatively large router, and you can also install a router in the bedroom.

You can install a secondary router in the bedroom, so that the signal in the bedroom is very good and can be used normally.

Because I don't understand how it works. In other words, it won't work yet.

The correct way to connect the router:

1. First open any browser and enter the router Tong Gao** (according to the ** decision behind the personal router model) to enter, as shown in the figure below.

2. Enter the administrator password (that is, the router password) in the interface you enter after completing the first step, and then click the OK button below to enter the next interface.

3. Click the routing button in the red box in the interface after completing the second step to enter the next interface.

4. Click on the interface you enter after completing the third step to enter the button in the red box to enter the next interface.

<>6. Click the wireless setting button in the red box to enter the interface after completing the fifth step to enter the next interface.

7. In the interface after completing the sixth step, select the wireless function in the red box, set the wireless name and password, and select the wireless channel.

The wireless mode and frequency band bandwidth can be saved.

For example, the more expensive routers may have a better effect through the wall, or they may directly buy them with a purpose. Ask the merchant to buy a router with a particularly strong ability to penetrate the wall, and you can fundamentally change the problem that the signal cannot be received in the room.

You can put it in the bedroom, or choose some routers with more power, so that the problem can be solved.

You can change a router, you can change the router that goes through the wall, you can change the faster speed.

The simplest and most effective way, first, change the position of the wireless router, as far as possible do not put it in the corner and other places, so that the signal of the wireless router will have a greater impact on the signal of the wireless router Which scheme is more suitable, it depends on the wiring of the master bedroom. If there is no network cable from the living room to the master bedroom, the solution of installing a wireless router in the bedroom will not work. Here, the author will first talk about the advantages and disadvantages of the three schemes.

Hold your horses! There are two types of solutions, one is to adjust on the basis of the original hardware, to put it bluntly, it is to save money; One is to add hardware on the basis of the original to seek the best WiFi coverage.

First of all, you have to buy another wireless router, it is recommended to buy a gigabit wifi5 router, everyone wants to use the things they just bought for two years, and the 100 gigabit router for dozens of dollars does not need to be considered; The signal passes through a strong load-bearing force or multiple walls, and the signal attenuation is serious, resulting in poor or unreceived wireless signal. As shown in the figure below, the lighter the color, the weaker the signal, and the location of the router is in the corner, resulting in poor or no signal on the left. The first type:

Child-mother router. I myself use a Huawei router, which has a sub-mother router, we only need to use the mother router in the living room and the sub-router in the bedroom.

The wifi in the living room was not available in the master bedroomThe main reason is that the wireless signal does not reach the master bedroomAccording to this reason, the main solution to the problem of the signal is to solve the problem of whether the wifi can be received in the master bedroom. If there are refrigerators, microwave ovens and other devices next to the wireless router that will affect the wireless signal, it is recommended that such devices are not placed next to the wireless router. There was no signal at all in the master bedroom:

I don't think it'...... likelyIf you encounter a change of the wifi router in the living room first, change the signal stronger, you can directly change the parent and child in one step, itself with an amplifier. The position of the main router remains unchanged, and the secondary router is placed in the master bedroom, if you do not consider the beauty or convenience, you can directly connect it through the network cable, and the following is the specific connection method of the secondary router as a secondary router.

Installing a router in the living room, because it has a wall from the room, it will cause a bad signal, we can go online and buy a router signal booster, which can enhance the signal and range of the router.

Answer: A wireless router is installed in the living room, and there is a room where the wireless signal is not good, which is already a common phenomenon. To solve this problem, there are various methods to choose from, each of which is explained below. If there is no reserved network cable in each room during the early wiring, you can use the power modem to expand the wireless network signal.

At present, many power cats themselves are a miniature router, so power cats can solve the problem of poor wireless signal coverage at home.

Connect one power cat to the LAN port of the wireless router, and put the other power cat in a room with poor wireless signal, and then make a simple setup and you can use it. At present, a pair of gigabit power cats is about 200 yuan. Install the wireless signal amplifier to put the wireless signal amplifier in the room with poor wireless signal, and then connect with the original wireless router at home, which is very convenient to install.

The ** of the wireless signal amplifier is about 100 yuan, which is relatively cheap. However, the wireless signal amplifier is not very effective, because the wireless signal amplifier has to receive the signal of the living room wireless router first, and then amplify the signal. If a strong wireless signal is not received, how can the wireless signal amplifier optimize the signal?

Install a wireless router If you want to solve the problem of poor wireless signal in the room, the most effective way is to install a wireless router. Of course, the premise is that there must be a well-laid network cable in the room.

If the room has a laid network cable, directly plug the network cable of the room into the WAN port of the wireless router, and select "dynamic IP" in the Internet mode. Then set the name and password of the wireless network. It should be noted that the IP address of the wireless router in the room is not in the same network segment as the IP address of the wireless router in the living room.

For example, if the wireless router management address in the living room is the secondary routing management address of the room, the secondary routing management address of the room should be to avoid conflicts.

There is a network cable port in the room.,If you have it, it's good to install an AP.,If you don't, install a wireless power cat.,If you want to be simpler, buy a wifi extender.,But it's not recommended.,Because wireless can never be compared to wired.,Installing AP is still the first choice.。

Open the door and keep it open, and the signal will naturally increase; Move the router into the room; Or install a new one in the room.

If this happens, you can change the router to a new one, or change the location of the router a bit.

Don't put the router in a corner or other places, you can also install another router, or you can buy a wifi signal extender or wifi signal booster.

I think it's wrong with you? Could it be that the router is broken? Or is it not plugged in at all?