How to wash the dirt inside the keyboard

Because the computer keyboard and mouse have the most contact with the user, and many computer users do not clean the display screen for several years, scrub the keyboard, mouse and other equipment, the surface of the computer user will often be stained with the sweat, oil, saliva, dust, hair and other dirt deposited in the keyboard, which hides a lot of germs, such as streptococcus. You see, if you work on such a keyboard all the time and forget to wash your hands afterwards, it will undoubtedly be detrimental to your health. Therefore, how to clean the keyboard becomes very important.

Use a screwdriver to unscrew the screws on the back of the keyboard, it should be noted here that some keyboards do not open the keyboard by unscrewing the screws on the back of the keyboard, and there are 2-3 screws under the keys on the front of the keyboard, and some of the keys need to be pried off the keyboard to see the rest of the screws. Unscrew it and we'll be able to open the keyboard. We can remove each key on the keyboard so that it can be cleaned sufficiently.

After the keyboard is disassembled, we will find that in fact, the circuit part of the keyboard is still very clean and does not need to be cleaned, mainly because the keys and the front panel of the keyboard are dirty, and we only need to clean these two parts. Put the keys and the front panel into the washing solution for cleaning, sometimes the dirt of the keyboard is easy to clean, but sometimes because of the long-term use of the keyboard, the keys are aging and yellow, it may not be easy to clean, you can put the keys in the detergent for a period of time, the effect will be better. After washing, let it dry for a few hours, or use a hair dryer to dry the keyboard and install the keyboard as it is.

It should be reminded that some large keys have reeds, and you should install the reeds when you install them, otherwise the keys will be damaged if you use them for a long time.

Resources.

As long as you are not a notebook, you can use a word wire to pry out each key from the edge except for the enter, space bar, and upper gear key, except for the mechanical device that may be disassembled. Then you'll be able to clean up what's inside the keyboard. Be careful not to drip water into the rubber pad under the key hole.

Teaches you how to clean the keyboard.

After the power is off, remove the keyboard with a screwdriver and clean it with a high-quality soft-bristled brush.

Disassemble it, place it in the sink and brush it with a brush, then dry it.

The electric board inside cannot be washed.

Teach you how to clean your keyboard at home.

It's very simple, follow the steps below to make your keyboard glow with a new look, hehe, is yours a desktop? If yes, do as follows: Tools to prepare: ear picks, toothbrushes, keystrokes, soft cloths, soapy water, trash cans.

Computer Keyboard Cleaning Steps: If you decide to clean the keyboard, be sure to disassemble and clean it thoroughly.

Otherwise, the cleaning effect will not be achieved. : If you don't remember the key sorting, please write down the key distribution with paper before disassembling it.

Remove the keycaps and the rubber pads under the keycaps with an ear picker, and store them separately when disassembling them. Avoid contamination of the rubber pad with the keycaps.

In general, the 3-layer circuit film does not need to be cleaned, and it cannot be wet. ⑥：

Rubber mats generally do not need to be cleaned. : After the keyboard base is dried, it should be sterilized and disinfected with key bacteria.

: Please allow the keycaps and keyboard shells to dry before assembling. ⑨：

After installation, spray sterilization and disinfection with key bacteria. : Develop good habits when using the keyboard in the future, do not eat, drink, smoke, etc. Disinfect the keyboard regularly.

When cleaning the keyboard, turn off the computer and remove the power cord and battery (if the computer is a removable battery).

You can use a commercially available keyboard cleaning brush or blow up a balloon to remove dust between the keys.

I'll write about my experience of how to clean, not somewhere.

1.Keyboard cleaning is divided into two parts, one is the disk, the other is the dust disk inside with a flat screwdriver, small, pry up and then put it in, the space bar and the enter key are not easy to install, and then put in the dish soap to soak it, wipe it down and then turn the keyboard upside down, let the garbage fall out, so it is a simple cleaning method.

2. If you find that some keys are not working, or there will be conflicts, what to do, is to clean the circuit board inside, in fact, it is very simple, just three pieces of paper-like circuit board to wipe it. Or upside down, use two lighters to resist the bottom of the keyboard, resist the keyboard, it was originally the key to resist, now rely on two lighters to resist, to prevent the plastic button inside from popping out, and wait for one by one to put it like this, and then put it, these buttons also have to clean up the dust mostly stuck to it

Then clean up the three panels and it's OK, and that's the end of it, and the rest will be scrutinized by yourself

1. The keyboard is upside down. Flip the keyboard upside down and tap the bottom of the keyboard. The impurities inside the keyboard will fall off.

2. Brushes. The brush cleans the surface of the keys and brushes out impurities and dust.

3. Keyboard vacuum cleaner. Now the more popular keyboard vacuum cleaner on the Internet, you can try it, also to clean the impurities and dust in the crevices.

4. Blow off impurities with a leather tiger. The dust and impurities hidden in the keys can also be cleaned by the skin tiger.

5. Magic dust remover. The magic dust remover that is now popular on the market can also be tried. Looks like it's working well.

6. Soft cloth or cotton swab. Use a soft cloth or cotton swab dipped in some detergent to clean stubborn stains. Note: Do not use too much detergent to avoid damage to the keyboard. Leaking liquid can be harmful to the keyboard.

7. Wet wipes. You can also wipe the keys directly with a wet paper towel to clean the dust and dirt in the cracks. If convenient, it can also be clamped with tweezers.

8. Alcohol disinfection. You can also use a cotton swab or a soft cloth dipped in disinfectant alcohol to wipe it. There is a theory that disinfectant alcohol wipes the letters off the keyboard. In fact, as long as the amount of alcohol is not much, it will not have much effect. If you feel that you need to disinfect, you can disinfect it.

9. Use a screwdriver or a special key puller to the keycaps. Be careful not to use too much force, as larger keycaps such as the spacebar and enter key are more difficult to get back into place, so try not to remove them. If necessary, remove the screws on the back of the keyboard and remove the surface of the keyboard for cleaning.

The whole process is cumbersome, so it is not recommended to disassemble and wash it frequently.

Use a wet towel to wipe the dirt on the keyboard, if the dirt is oily, you can use a detergent, dip some warm water to wipe it, and if necessary, disassemble the keyboard and clean it with a brush.

Hello! To clean when the machine is turned off, you can first wipe it with a semi-dry wipe, and for stubborn dirt, you can use a damp cotton swab dipped in dish soap to clean it, but be sure to use a small amount of water to avoid causing water to enter the keyboard.

1. Simply clean the surface. (for those with a lot of dust).

If you want a simple cleanup, you can turn the keyboard upside down.

Then gently tap the back of the keyboard, and at this time, the dust and dirt inside will fall out.

Knock back and forth a few times to remove all the dust on the surface. 2. Wipe the surface of the keyboard (for keyboards that have not been used for a long time).

If the keyboard has just been used for a short time, there won't be too much dust in it.

All you need to do is turn off the computer and unplug the power point.

Then wipe the surface of the keyboard with a clean, slightly damp cloth. 3

The surface of the keyboard is not clean with a damp rag.

In many cases, a wet rag will not wipe off the dirt on the surface.

You can use a rag dipped in some dish soap or laundry detergent to wipe it off.

It should be noted that it must not be stained too much, otherwise it will easily drip into the keyboard.

Pay attention to wipe the corners around you, and don't button the gaps of the small buttons, which are easy for water to enter inside. 4

Detach the keys (for longer periods of use).

This method is a little tiring, and the keyboard will have to dry for a while and cannot be used.

The computer is turned off and the keyboard power point is unplugged. Find a larger place to start disassembling the keyboard keys.

Flip the small button with something a little harder, and the button will come down.

There are several large buttons with iron wires inside, which are difficult to disassemble, so it is recommended that you only disassemble small ones.

The big one has a shiift space and enters. When dismantling the big ones, you will find that they are different from the small buttons. 5

Soak the small buttons.

Concentrate the removed keys together, don't get the ** all there.

Find a basin with a small amount of water, and the water in which you can soak the keyboard twist is enough.

Mix with dish soap or other cleaning products and soak for about 1 hour.

After soaking, wear gloves and brush it with a brush, or you can wipe it with gloves will be clean. 6. Clean the keyboard keys.

After brushing, wash it with clean water, like the last step of washing clothes.

Rinse and dry.

Dry to the sun , a ventilated place is fine.

If it's dry at noon, then check to see if there is any water in the button at night.

If it is dried at night, it is generally slightly cooler at night, so it is estimated that it will be dry in the afternoon of the next day.

Twist the keyboard upside down, knock it, and if there are no water marks, then it's dry. Precautions: After wiping with dish soap or laundry detergent, if you do not feel the smell. You can wash the rag with clean water, then wring it out and wiping one.

Put the keyboard on the table in reverse, and then tap it with your hand vigorously, and those little things will come out, and then wipe it with a small cloth dipped in alcohol.