Lubricating oil tells you what cutting fluid is used for stainless steel machining

Stainless steel processing technology generally adopts turning, milling, drilling, reaming, boring, etc.

Stainless steel cutting fluids are divided into three main categories:

Emulsion: oil content is greater than 50%, performance: good lubrication and anti-rust performance, but poor cooling performance, poor stability and short life.

Semi-synthetic cutting fluid: oil content 5%-30%, performance: excellent lubricity, rust resistance, cooling, long life, good comprehensive performance, wide range of use.

Fully synthetic cutting fluid: zero oil content, performance: good cooling performance, good stability, long service life, but poor lubrication and anti-rust performance.

For stainless steel machining, it is recommended to choose a special stainless steel cutting fluid. It can achieve better results and protect stainless steel.

There are two kinds of stainless steel cutting fluids: water-based and oil-based, and the specific one depends on the processing technology.

If the cooling effect is high, it can be water-based, and if the lubrication performance is high, it can be oil-based. I recommend you to use itMicroemulsion type cutting fluid DC-507B。It is a new type of water-based extreme pressure cutting fluid, which is formed by dissolving mineral oil with extreme pressure additives and surfactants in water.

This microemulsion cutting fluid has a high surfactant content and a very small diameter of oil droplets dispersed in water, so it has a strong permeability and can effectively lubricate and cool the cutter face.

It takes into account the advantages of both oil-based cutting fluid and water-based cutting fluid, and has excellent lubrication, cooling, penetration and anti-rust properties, which can effectively meet the processing requirements of stainless steel. It has been widely used in difficult-to-machine materials such as stainless steel, and is an ideal cutting fluid for stainless steel machining.

Is there a cutting fluid or a cutting oil for stainless steel cutting? It is widely used in various cemented carbide metals, such as high-speed steel, carbon steel, stainless steel, alloy, copper-aluminum alloy and other raw materials. Cemented carbide products have high hardness, strength, wear resistance and corrosion resistance, and also have high requirements for the quality and consumption of cutting fluid.

Stainless steel cutting oil needs to be useful to isolate the workpiece from the tool and play a good lubricating role, otherwise it will cause wear and affect the machining process. For the processing technology of cemented carbide, high precision is also required, and the surface gloss of the tool is good. The demand for cutting fluid needs to meet these aspects, hard metal is a difficult metal to machine, and finding a suitable and easy cutting fluid is also a long-term search.

Stainless steel cutting oil has the following advantages: good extreme pressure lubrication, low corrosion, excellent pressure wetting performance, can meet the needs of special hard metals and difficult machining, and reduce scratches and empty noise. It has good cold shear and fast heat dissipation, which can eliminate conflicts caused by intense heat during high-speed operation, and reduce odor and component deformation to a very small extent.

Skuek l oily cutting oil:

Clear, light-colored, low-viscosity straight-run mineral cutting oils are particularly suitable for cutting and light machining of metals such as stainless steel, aluminium and aluminium alloys, magnesium and magnesium alloys.

Features: Excellent machinability:

The low viscosity and fast reflow not only wet the surface of the metal workpiece quickly, but also penetrate into the cutting zone quickly and efficiently. This product has excellent cooling characteristics and good heat transfer performance, which can effectively prevent the loss of tool hardness and the deformation that affects the machining accuracy of the workpiece. Not only that, but this product is light in color and has high transparency, which allows you to see the tool and workpiece more clearly.

No stains on the workpiece:

This highly refined base oil does not contain active additives that chemically react with metals, so the use of this product will not leave stains on the workpiece, whether processing ferrous or non-ferrous metals.

Extend the life of your tools:

The highly refined base oil has good lubricating characteristics, which can ensure the lubrication of the interface between the tool and the cutting chip, and reduce the wear of the tool and the generation of frictional heat.

Can be safely used in the machining of magnesium:

This product has excellent cooling characteristics, there is no need to use water** processing fluid to remove the heat generated during machining, because it does not contain water, so this product does not react with magnesium and produce very, very dangerous hydrogen.

Stainless steel cutting fluids from AMTT Lubrication Technology can be used.

Inal stainless steel special cutting fluids can be used.

Stainless steel processing technology generally adopts turning, milling, drilling, reaming, boring, etc. Stainless steel cutting fluids are divided into three categories:

Emulsion DC-503: oil content is greater than 50%, performance: lubrication and anti-rust performance is good, but the cooling performance is poor, the stability is not good, and the life is short.

Semi-synthetic cutting fluid DC-507: oil content 5%-30%, performance: excellent lubricity, rust resistance, cooling, long life, good comprehensive performance, wide range of use.

Fully synthetic cutting fluid DC-505: zero oil content, performance: good cooling performance, good stability, long service life, but poor lubrication and anti-rust performance.

Answer: You can choose stainless steel drilling fluid, SCC310 stainless steel drilling fluid is designed for high-speed extreme pressure processing process, can adapt to stainless steel, stainless steel strap drilling processing of cutting fluid. SCC310 stainless steel drilling cutting fluid effectively and quickly precipitates the finest chips and improves surface finish.

Common types.

Oil-based cutting water-based cutting fluids, environmentally friendly long-term cutting fluids, special cutting fluids for machining centers, micro-emulsified cutting fluids, extreme pressure cutting fluids, wire drawing oils, metal grinding fluids, glass grinding fluids, oil-based grinding fluids, water-based grinding fluids, cutting oils, wire cutting fluids, cutting coolants, wire cutting working fluids, monosilicon cutting fluids, polysilicon cutting fluids, sapphire cutting fluids.

Emulsions, stamping oils, quenching agents, high-temperature oils, extreme pressure cutting fluids, anti-rust oils, blackening agents, drawing oils.

Choose a method. When choosing stainless steel cutting fluid, we should first consider two aspects: one is to consider the cutting performance of the cutting fluid (primary performance), and the other is to consider its use performance (secondary performance). The primary performance is mainly related to the life of the tool, and the secondary performance considers its corrosion resistance, safety, odor, arson, waste liquid treatment, and hazard to the first grade.

With the increasing attention to environmental protection and labor safety, more attention is paid to secondary performance and waste liquid disposal when selecting cutting fluids.

When selecting non-water-soluble cutting fluids, two factors should be considered: processing methods and materials. Light load processing can use mineral oil with good anti-corrosion performance or straight-run mineral oil. For example, the machined parts are aluminum, aluminum alloy and other easy-to-machine non-ferrous metals, and it is usually possible to use deeply refined low-viscosity paraffin mineral oil, which is mainly characterized by good lubricity, cooling and low oil mist tendency.

For medium machining such as low-intensity cylindrical cutting and drilling, as well as forming and grinding of general-purpose materials such as iron and non-ferrous metals, fatty oil and chloride must be added to the mineral oil to improve its extreme pressure performance. Chloride-containing oil is also required for the front reaming of the drawing. In addition to adding chloride to gear cutting and tapping, it is also necessary to add sulfide fat.

For extremely harsh machining and difficult-to-machine materials, activated sulfur components are generally added, but yellow metals such as copper and its alloys cannot be added. The selection of water-soluble cutting fluids is mainly based on their use.

Introduction: Industrial metal cutting fluid is a kind of industrial liquid used in the process of metal cutting and grinding to cool and lubricate tools and processed parts, cutting fluid is made of a variety of super functional additives through scientific compounding, and has good cooling performance, lubrication performance, anti-rust performance, degreasing and cleaning function, anti-corrosion function, easy dilution characteristics. It overcomes the problems of traditional soap-based emulsion that it is easy to smell in summer, difficult to dilute in winter, and has poor anti-rust effect, and has no adverse effect on lathe paint, and is suitable for cutting and grinding of ferrous metals, which is the most advanced grinding product at present.

The cutting fluid is better than the saponified oil, it has the characteristics of good cooling, cleaning, rust prevention, etc., and has the characteristics of non-toxic, tasteless, no erosion of the human body, no corrosion of equipment, and no pollution to the environment.

Water-based cutting fluids can be divided into emulsions, semi-synthetic cutting fluids and fully synthetic cutting fluids. The classification of emulsions, semi-synthetic and fully synthetic usually depends on the type of base oil in the product: emulsions are water-soluble cutting fluids that use only mineral oil as the base oil; Semi-synthetic cutting fluids are water-soluble cutting fluids that contain both mineral oil and chemically synthesized base oil; Fully synthetic cutting fluids are water-soluble cutting fluids that use only chemically synthesized base oils (i.e., no mineral oils).

On the issue of taxes and fees, I don't know, if it is a fully synthetic, it will not involve the problem of lubricating oil products, if it is semi-synthetic, then basically the base oil will be used, and it will involve the production of lubricating oil products, depending on how the local regulations are defined.

If you have any questions, add q to communicate.

Anti-rust think tank, for you to answer.

It probably belongs to the category of industrial lubricants.

The State Administration of Taxation believes that according to the annotation of the scope of lubricating oil consumption tax, lubricating products used in internal combustion engines and machining processes processed and produced with ** or other raw materials belong to the scope of lubricating oil taxation.

Cutting fluid is a lubricating product in the machining process and is subject to consumption tax.

The Notice of the Ministry of Finance and the State Administration of Taxation on Several Specific Policies on Consumption Tax (Cai Shui [2006] No. 125) and the Notice of the Ministry of Finance and the State Administration of Taxation on Adjusting and Improving Consumption Tax Policies (Cai Shui [2006] No. 33) stipulate that "the behavior of units and individuals purchasing large packages of lubricating oil after simple processing into small packages or purchasing lubricants without processing and only affixing trademarks shall be regarded as the production of taxable consumption tax products." Units and individuals shall declare and pay consumption tax for the above behaviors.

1.For stainless steel processing, it is the same as cemented carbide, due to the high surface hardness, so the ordinary oil-based cutting fluid, emulsified oil, and semi-synthetic are not suitable for stainless steel processing.

2.Stainless steel machining requires the cutting fluid itself to have very good extreme pressure performance, and oil-based lubrication is relatively minor at this time.

Therefore, the selection of use is preferred, and the extrusion performance is the first.

rissoil

corlan

SE206 can be used to process various carbon steels, cast iron, stainless steels, cemented carbide, alloy steels, and can also be used for copper, copper alloys and some aluminum alloys.

Sulfide oil 15 20 CCL4 is usually available; White lead oil, motor oil or other mineral oil; kerosene diluted chlorinated paraffin, etc.

With olein, in order to reduce costs, it can also be used after dilution of some engine oil.

Stainless steel has a cutting fluid that specializes in stainless steel, and SW-230 produced by our factory can be used for stainless steel.

A good cutting fluid will have a better surface treatment effect. In general, the surface treatment of stainless steel is very important.

Fangchuan lubrication.

Microemulsified cutting fluid with high extreme pressure. Such as WZF101 and so on.

Stainless steel processing emulsified form has SW-013, semi-synthetic type: SW-380, fully synthetic type: SW-230 The finish and lubricity of the stainless steel processing surface are very important.

Fangchuan Lubrication Company.

Stainless steel has poor thermal conductivity, and can be cooled with aqueous coolant.

What cutting fluid is used for machining stainless steel materials? First of all, if you only process stainless steel, if you only process stainless steel, it is recommended that you use a special cutting fluid for stainless steel, the effect will be better. Secondly, if you also have other materials such as copper, aluminum, iron and other metal materials, it is recommended that you use a universal cutting fluid, which is easy to operate.

This requires the use of stainless steel special cutting fluid, and choosing the right cutting fluid is not only for the protection of the workpiece, but also for the protection of the machine tool. Linqing City, Shandong Province Tianqi special oil production of cutting fluid variety, stable quality, mature technology, products for more than ten years committed to China's largest bearing market - tobacco shop customers, and sent to all parts of the country, easy to dilute, durable, in the specified concentration of use, diluent life in more than 1 year. It has good anti-rust performance and has the function of removing rust.

The cooling performance is good, and the tool is more durable. The diluent is transparent or translucent, and there is no foam during use, and the machine table is non-greasy and the processing visibility is high. This product is clean, environmentally friendly, non-odorous, gives the operator a cleaner working environment, and has no corrosion and swelling effect on the paint and sealing parts of the machine tool.

This product is non-toxic and tasteless, and has no adverse reactions to **.

Due to the high strength of stainless steel, the cutting heat generated during cutting is also high. Therefore, when cutting stainless steel, it is better to use a coolant with water agent. The cooling effect of the coolant of the water agent is much better than that of the coolant of the oil agent.