How does the Bells shield water dispenser stop heating up to 80 degrees?

There was a problem with the temperature-controlled version of the water dispenser.

The water dispenser is boiled with an inner tank (stainless steel tank), there are two thermostats on the inner tank, one is used to prevent dry boiling, and the other is heated and jumped to keep warm, our daily life water can not be burned at 100 degrees, it can only reach more than 95 degrees, the general heating jump insulation temperature control is 80-90 degrees, but because of heat conduction, the water temperature should be above 85 degrees after boiling water after 80 degrees temperature control, which is only for the general water dispenser, a good machine should be above 90 degrees, The tea-making water dispenser can reach more than 95 degrees.

The water dispenser is boiled with an inner tank (stainless steel tank), there are two thermostats on the inner tank, one is used to prevent dry boiling, and the other is heated and jumped to keep warm, our daily life water can not be burned at 100 degrees, it can only reach more than 95 degrees, the general heating jump insulation temperature control is 80-90 degrees, but because of heat conduction, the water temperature should be above 85 degrees after boiling water after 80 degrees temperature control, which is only for the general water dispenser, a good machine should be above 90 degrees, The tea-making water dispenser can reach more than 95 degrees.

Water cannot be boiled for too long in the water intake, and it will be violent when the pressure of the inner tank is too great, so it is rare to use 90-95 temperature control, and only very good quality can be.

Hello dear, I am happy to answer your question about Qiqiao There may be the following reasons why the Belston water dispenser does not heat: 1Poor or damaged power cord contact; 2.

Failure of the heating element; 3.Thermostat failure; 4.The control panel is faulty.

Workaround:1Check whether the power cord is plugged in tightly or damaged, and replace the power cord if there is a problem; 2.

Check whether the heating element is faulty, if the fault needs to be replaced; 3.Check whether the thermostat is faulty, if it is faulty, the thermostat needs to be replaced; 4.Check whether the control slide key panel is faulty, if it is faulty, the control panel needs to be replaced.

Hello, there may be the following situations when the Belston water dispenser does not heat: 1The water dispenser is not powered on:

Check whether the water dispenser is plugged in and whether the power switch is turned on. 2.Heating tube damage:

If the water dispenser heating pipe is damaged, the water cannot be heated, and Zheng Xian needs to replace the heating pipe. 3.Thermostat failure;

The thermostat of the water dispenser is responsible for controlling the heating temperature of the heating pipe, if the thermostat fails, the water dispenser will not be able to heat the water, and the thermostat needs to be replaced. 4.Line Failure:

If the circuit wheel of the water dispenser is damaged, it will also cause the water dispenser to fail to heat the water. If the above situations are ruled out and the problem is still not solved, it is recommended that La Congbi contact professional maintenance personnel for maintenance. Beltton water dispenser is an intelligent drinking equipment, which can provide us with convenient and fast drinking water service.

But during use, you need to pay attention to regular cleaning and maintenance to ensure the normal operation of the water dispenser. At the same time, we should also pay attention to saving water and protecting the environment.