Adjusting the water temperature of the wall hung boiler to 30 degrees will save gas

Updated on home 2024-02-29
13 answers
  1. Anonymous users2024-02-06

    No. Wall-hung boiler.

    Adjusting the indoor temperature to about 15 is the most air-saving. If you feel that the temperature is low, you can adjust the temperature upwards according to your own temperature needs. If you are not at home, keep the wall-hung boiler at the lowest level, that is, about 8 degrees, and it is best to set the indoor temperature between 18 and 22 degrees when you go home, and if there are elderly and children at home, it can be two degrees higher.

    Wall-hung boiler gas saving method:

    1. Pay attention to the indoor thermal insulation state, the indoor thermal insulation must be well controlled, if the control is not good, the indoor heat will produce convection, it is the hot air flowing out of the outdoors, and the outdoor cold air will flow into the room, so that the indoor temperature is very unstable, the wall-hung furnace will continue to heat, and the continuous heating will be very wasteful. Therefore, it is necessary to keep the temperature in the room warm.

    2. Don't turn it off when you go out for a short time, you have a misunderstanding, that is, you think that when there is no one at home, you should turn off the wall-hung boiler, which will save gas. In fact, it is actually very wasteful to go out for a short time such as commuting and always turning on and off the wall-hung boiler many times when you get home from work.

    Since there is a temperature difference between the switches, when you turn it on, it takes a long time to heat up to reach the ideal temperature, during which a lot of gas is wasted. Therefore, do not turn off the wall-hung boiler in the case of short-term outings such as commuting, just adjust the temperature to a stable and insulated state. If you want to go out for a long time, you need to turn off the wall-hung boiler.

    3. To be inspected and maintained regularly, the wall-hung boiler will definitely have some scale and residue after long-term use, if it is not cleaned and maintained in time, it will cause pipeline blockage, the effect will be weakened, and a lot of gas will be wasted. So, be sure to check and maintain it regularly.

  2. Anonymous users2024-02-05

    Adjusting the temperature to a low level is to save gas, but adjusting the water temperature to 30 degrees is obviously too low, so the heating effect is not good. It is recommended to adjust it to 40 to 60 degrees for underfloor heating, and 50 to 70 degrees for radiators.

  3. Anonymous users2024-02-04

    The water temperature of the wall-hung boiler is adjusted to 30 degrees, why does the machine not ignite?

  4. Anonymous users2024-02-03

    When using underfloor heating, the water temperature should not exceed 60, and radiators should be used.

    The temperature can be adjusted up to 80 °C during heating, and the outdoor ambient temperature.

    High, the outlet temperature can be appropriately lowered, and the outdoor environment temperature is low, and the outlet temperature can be appropriately increased.

    from the wall-hung stove. From the perspective of gas saving, the lower the temperature of the wall-hung boiler, the more gas saving, and generally speaking, every degree of temperature increase will consume more energy.

    5%, but the temperature of the wall-hung boiler should not be too low, which will not achieve the heating effect;

    If you consider the two methods of comfort and gas saving.

    It is recommended that the room temperature should be set at about 20 degrees, the water temperature of the wall-hung boiler should be set between 60 and 80 degrees, if you are using floor heating, you can set 60 degrees, if you are using a radiator to heat, you need to set 70 to 80 degrees.

  5. Anonymous users2024-02-02

    Hello, I am glad to serve you and give you the following answers: Generally speaking, the wall-hung boiler is more gas-saving than 45 degrees. Because the temperature range of the wall-hung boiler is generally between 45-55 degrees, 50 degrees is the best temperature adjustment point, which can achieve the best energy-saving effect.

    Reasons for the problem:1The temperature range of the wall-hung boiler is generally between 45-55 degrees, if the temperature is too low, it will cause the hot water to be not hot enough, which will affect the use effect; 2.

    If the temperature is too high, it will cause the hot water to overheat, which can easily cause scalding and affect safety. Workaround and practice steps:1

    First of all, check the temperature range of the wall-hung boiler to ensure that it is between 45-55 degrees; 2.Then, adjust the temperature control point of the pure potato wall-hung boiler, which is generally adjusted to 50 degrees, which can achieve the best energy-saving effect; 3.Finally, check the temperature of the wall-hung boiler to ensure that it is around 50 degrees to ensure the use effect and safety.

    Personal Tips:1The temperature range of wall-hung boiler is generally between 45-55 degrees, and 50 degrees is the best temperature adjustment point, which can achieve the best energy-saving effect; 2.

    The temperature control point of the wall-hung boiler should not be too low or too high, so as not to affect the use effect and safety of the mu; 3.Regularly check the temperature of the wall-hung boiler to ensure that it is around 50 degrees Celsius to ensure the use effect and safety.

  6. Anonymous users2024-02-01

    Gas heating wall-hung boiler.

    It is designed according to the working conditions of high temperature water supply and low temperature return water with large temperature difference (20) and small flow, and the standard working conditions of European gas heating wall-hung boiler are generally 80 for water supply and 60 for return water, while low-temperature hot water floor radiant heating requires large flow and small temperature difference to operate. In winter, the indoor temperature of the wall-hung boiler is set to 20 is the most suitable. If the heating temperature standard is set according to the standard, the winter heating temperature standard is between 16 and 26, and the temperature that takes the middle value and people feel most comfortable is 20.

    According to the "Technical Regulations for Ground Radiant Heating", the supply and return temperature of the low-temperature hot water ground radiant heating system should be determined by calculation, and the water supply temperature should not be greater than 60. Civil.

    The water supply temperature should be 35 50, and the temperature difference between the supply and return water should not be greater than 10. Generally, the floor heating is 50-60 degrees, and the radiator is slightly higher by about 70 degrees, so that the indoor temperature can basically reach about 20 degrees. When the wall-hung boiler uses the underfloor heating mode, it is more appropriate to control the outlet water temperature within 60, and use radiators.

    When the water temperature is set to about 80. When the outdoor ambient temperature is higher than the water temperature, it is recommended to lower it appropriately. In winter, when the outside temperature is relatively low, the water temperature can be appropriately high.

    How many degrees can be set at the minimum water temperature for gas wall-hung boiler heating, if it is floor heating, the temperature of the heating water should not exceed 60 degrees, and the temperature of the radiator heating water should not exceed 70 degrees. 2. It is equipped with a wall-hung furnace thermostat.

    It is quite convenient for users to set the temperature, and the room temperature of how many degrees is needed can be accurately set directly through the thermostat; 3. Users who do not have a thermostat need to adjust the wall-hung boiler according to the actual situation of the room to control the water temperature of the floor heating or radiator and other heat dissipation terminals, under normal circumstances, the water temperature of the floor heating should be set to 40 50, and the water temperature of the radiator is set to 50 60

    Look at the brand, some brands have the lowest temperature, 16 degrees, some are 15 degrees, and according to the brand, its minimum setting temperature is also different. Of course, if you have a wall-mounted stove, the minimum temperature is usually 17 or 18 degrees. From the perspective of our lives, it should be very normal.

    The minimum water temperature of gas wall-hung boiler heating should be set to 40 degrees, if it is lower than 40 degrees, then the water released basically does not have much temperature, so we should try to set the temperature to about 45 degrees, so as to ensure that the temperature of the water is more suitable, and children should prevent scalding.

    The minimum temperature of the wall-hung boiler is the lowest gear, which is about 8 degrees. When the general staff is not at home, the wall-hung boiler can be adjusted to the lowest setting, which can save energy and will not freeze the heating system.

  7. Anonymous users2024-01-31

    The minimum temperature of the wall-hung boiler is the lowest gear, which is about 8 degrees. When the general personnel are not at home, the wall-hung boiler can be adjusted to the lowest setting, which is energy-saving and will not freeze the heating system. It can be adjusted according to the weather temperature, environment and human comfort.

    The precautions for using a hanging fireplace are as follows:

    1. Keep away from combustibles: The wall-hung boiler needs to be installed in the area far away from combustibles, and special attention must be paid to avoid some combustible gases and liquids during use, so as to ensure the safety of the wall-hung boiler to a great extent.

    2. Pay attention to cleaning: the wall-hung boiler needs to be cleaned during use, the wall-hung boiler is used in the last period, there will be impurities inside, if you do not pay attention to cleaning, it is easy to affect the service life of the wall-hung boiler, it is best to ask professionals to descale and clean.

    3. Avoid freezing: When using a wall-hung boiler in winter, it is easy to freeze, especially if it is not used for a day, it will freeze, so it is necessary to turn on its anti-freezing function, or drain all the internal water when not in use, which can effectively avoid freezing.

  8. Anonymous users2024-01-30

    The indoor temperature is recommended not to exceed 25°, or even 22° is enough; The temperature setting of the wall-hung boiler should be 70 to 75°. If you go to work during the day, the indoor temperature can be adjusted to about 12°, and the temperature of the wall-hung boiler is below 30°, and you can adjust it up when you get home.

  9. Anonymous users2024-01-29

    The indoor temperature of the wall-hung boiler should be adjusted to about 15. If you are not at home, it is best to keep the wall-hung boiler on the lowest setting, that is, around 8 degrees.

  10. Anonymous users2024-01-28

    Wall-hung boiler. Whether it is heating and gas saving or gas consumption, we cannot only look at the setting temperature of the wall-hung boiler, but also look at whether the heating system is good or not. If the heating system is made according to the specifications, generally speaking, the lower the temperature set, the lower the gas cost will be.

    The temperature set on the wall-hung stove is the outlet temperature of the heating water, generally speaking, the temperature should not exceed 60 when using the form of floor heating heat dissipation, but if the radiator is used.

    If you set the temperature of 55, the room temperature will not be effectively raised to a comfortable temperature, and the human body will not feel comfortable.

    Secondly, if the room has a temperature controller, the setting temperature of the wall-hung boiler is used as an outlet temperature, and the room temperature and the start and stop of the wall-hung boiler are determined by the thermostat.

    When the room temperature reaches the set value, the thermostat will control the wall-hung boiler to shut down, and there is little difference between the gas consumption of 45 or 55.

  11. Anonymous users2024-01-27

    A wall-hung boiler setting with a lower water temperature will be more gas-efficient. The lower the heating temperature, the less heat is needed and the more gas is saved. You can also use a wall-hung boiler thermostat, and use a wall-hung boiler thermostat for room temperature control and time slotting, so that you can heat according to the customer's needs and avoid gas waste.

    Close or lower the radiator valve of the uninhabited room: if the housing area is larger, the room is more, and the population is relatively small, then the radiator valve of the room that does not live or is used with low frequency can be completely closed or smallened, which is equivalent to reducing the heating area, not only saving energy, but also accelerating the heating temperature rise in the normal use of the space, reducing gas consumption.

  12. Anonymous users2024-01-26

    Summary. The wall-hung boiler has been lowered overnight to save gas, because from the perspective of gas saving, the lower the temperature of the wall-hung boiler, the more gas-saving, because every time the room temperature rises by one degree, it needs to consume about 5% more energy. However, the temperature is too low and can not achieve the heating effect, from the comfort and gas saving considerations, it is recommended that the indoor temperature should be kept at about 20 degrees during the day, and the temperature can be lowered to about 15 degrees after sleeping at night.

    The energy consumption of the wall-hung boiler has a lot to do with the degree of personal cold intolerance, as long as the sturdy or fat adults will feel warmer as long as 18 degrees, and for the elderly and young people who are thinner and weaker, they need to reach 22 to 25 degrees to feel warm, so the gas consumption will be different.

    The wall-hung boiler has been lowered overnight to save gas, because from the perspective of gas saving, the lower the temperature of the wall-hung boiler, the more gas-saving, because every time the room temperature rises by one degree, it needs to consume about 5% more energy. However, the temperature is too low and can not achieve the heating effect, from the comfort and provincial potato gas consideration, it is recommended that the indoor temperature should be kept at about 20 degrees during the day, and the temperature can be adjusted to about 15 degrees after sleeping at night. The energy consumption of the wall-hung boiler has a lot to do with the degree of personal fear of cold, as long as the sturdy or fat adults will feel warmer as long as 18 degrees, and for the children, the elderly and the younger people who are thinner need to reach 22 to 25 degrees to feel warm, so the consumption of handwheel gas will be different.

    Will it be more laborious to lower the temperature at night and raise it again in the morning?

    Yes. Then what else do I adjust, it's okay to be 20 degrees all the time.

    Then you don't need to adjust it, if you want to save gas, you can adjust it again.

    I just want to save gas, but it's more laborious to turn it down every night and up during the day.

    No, it won't. You just said you would <>

    It's just a bit of a drain.

    So which one is a little better?

    That's what you said.

  13. Anonymous users2024-01-25

    Summary. Hello dear, happy to answer your <>

    Answer: The wall-hung boiler is adjusted to 50 degrees and 45 degrees Celsius, which is 45 degrees gas-saving, and the wall-hung furnace is 45 degrees gas-saving. But the indoor temperature may not reach a comfortable temperature, and the inlet temperature is a bit low.

    If you adjust it to 50 degrees, it will be a bit of a drain, but it will raise the indoor temperature. It is recommended not to take the inlet temperature as the control index, but the indoor temperature comfort should be the control index, and the outdoor temperature is low, so the inlet temperature should be appropriately increased, and the opposite can be reduced.

    It is better to adjust the wall-hung boiler to 50 degrees or 45 degrees to save gas.

    Hello dear, happy to answer your <>

    Answer: The wall-hung boiler is adjusted to 50 degrees and 45 degrees, which is 45 degrees to save gas, and the wall-hung furnace wheel is slowly teasing 45 degrees to save gas. But the indoor temperature may not reach a comfortable temperature, and the inlet temperature is a bit low.

    If you adjust it to 50 degrees, it will be a bit of a drain, but it will raise the indoor temperature. It is recommended not to take the inlet temperature as the control index, but the indoor temperature comfort as the control index, and the outdoor temperature is low, so the inlet temperature can be appropriately increased, and the opposite can be reduced.

    I haven't asked a question yet?

    Hello dear, happy to answer your <>

    Answer: The wall-hung boiler is adjusted to 50 degrees and 45 degrees, which is 45 degrees to save gas, and the wall-hung furnace wheel is slowly teasing 45 degrees to save gas. But the indoor temperature may not reach a comfortable temperature, and the inlet temperature is a bit low.

    If you adjust it to 50 degrees, it will be a bit of a drain, but it will raise the indoor temperature. It is recommended not to take the inlet temperature as the control index, but the indoor temperature comfort as the control index, and the outdoor temperature is low, so the inlet temperature can be appropriately increased, and the opposite can be reduced.

Related questions
10 answers2024-02-29

1. Power selection: The selection of wall-hung boiler should be based on many factors such as the area where your house is located (different climatic conditions in different regions), location, house area, enclosure structure (villas, bungalows, energy-saving buildings, old buildings, etc.), floor height, floor, unit, heating terminal heat dissipation type (floor heating, radiator, fan coil unit is the most common) and many other factors. >>>More

16 answers2024-02-29

1. In the case of unprecedented prosperity in the domestic construction industry, the construction speed of the municipal heating pipe network is obviously unable to keep up. And the heating demand in the north is urgent. >>>More

8 answers2024-02-29

The meaning of bar in gas wall-hung boiler is the display unit of water pressure. >>>More

13 answers2024-02-29

One. Excellent quality.

The quality of the main components in the wall-hung boiler is reliable, the main components include pumps, controllers, expansion tanks, proportional valves, etc., it is best to choose products with excellent quality and well-known brands, so as to ensure the overall quality and performance of the wall-hung boiler, although the highest is on the high side. >>>More

24 answers2024-02-29

The German Langlika is nice and worth recommending.