I have a stone that I want to polish what to do

Generally, you need emery and water to put your stones, put them in the inner tube of the waste motorcycle, and then find a way to keep rolling for 1 hour. to be processed.

But I didn't know that I could get emery.

I've learned jade carving before, so I know the polishing steps, and you can do this: polish your stone with fine sandpaper (bought at a hardware store) and polish it carefully. Then use a rough scrap cloth.

The cloth or denim that farmers often wear is polished again, this time it takes longer, and you can't see the sandpaper to mark it, and then you put your stone in the basket of the steamed bun for 15 to 30 minutes when you cook (I hope the stone is not very big to put down) The main reason for steaming is that your stone is very hot, and put the paraffin wax in the bowl while steaming the stone, if not, buy a few candles and put them in the bowl, and then put the bowl in the basket to steam, the wax becomes watery, and the stone is taken out and placed in the place with the least contact surface, For example, make a shelf with iron wire, then use a newly bought small brush (for painting) dipped in wax water to brush your stone evenly while it is hot, and then let it cool naturally.

Look at your stone, crystal clear!!

Let's keep the nature of the stone!

1.Prepare the tools.

Before polishing, you need to prepare the required tools in advance, you need to have a carving and hanging grinder, it is recommended to use a flexible shaft, generally that kind of machine will be more flexible to use. In addition, you need to prepare some diamond grinding heads and jade strip files and sandpaper and other similar, if there are wool felt and cowhide and rubber grinding wheels and brushes, you should also put on the back, and finally prepare polishing powder and polishing wax, fixing glue and grinding stones.

2.Polished.

It is best to soak the stone for two days, start to polish the stone gaps, or you can use bamboo skewers and bamboo sticks and chopsticks to stick polishing powder, and we generally use a felt wheel to wipe the prepared polishing paste for surface polishing.

3.Varnish wax.

After applying good wax, it can protect the surface of the stone, making its luster more beautiful and more durable. We first put the prepared wax in a beaker and let it dissolve into a liquid, put the jadeite in it, wait for a minute, and then take it out and dry it with a hair dryer, or you can wait for it to dry naturally, and then the wax will be fine, and this is the effect I mentioned earlier. It looks like jadeite will shine more beautifully than before waxing, and this luster will last longer than when it is not waxed.

Extended Materials. Stone, generally refers to the small rock mass that falls off by the external force of the large rock mass, mostly attached to the surface of the large rock mass, generally into a block or oval, the appearance is rough, some are smooth, the texture is firm, brittle and hard. It can be used to make stone tools and collect stone mines. Thousands of years ago, our ancestors used stones to make fires.

Stones are generally composed of calcium carbonate and silicon dioxide.

The most important thing in raising stone is to take stone as a friend. Savvy collectors tend to constantly stroke the stone and communicate with it with their hands, so that popularity and sweat will slowly accumulate on the surface of the stone, forming a dark and shiny skin, which is commonly known as pulp. This kind of pulp can be said to be a kind of quaint witness, and the more dignified the pulp, the higher the value of appreciation.

Hiding stones and raising stones, can not only cultivate sentiment, but also a great pleasure in life, sometimes intentionally or unintentionally to obtain a beautiful stone, it is enough to make people immersed in it, love it. It is no wonder that the "stone idiot" Mi Fu but see the strange stone to worship as a "brother", encounter treasures hidden in the sleeve called "hold the game".

The angle grinder is the best, and it is also cheap within 200, and it can be grinded, cut, etc., with a little coarse emery flakes and fine, coarse grinding, and fine polishing. Be sure to wax everything so that the stone picture can be clear.

The strange stone in the river due to the washing of the quicksand of the river, the rough surface of the stone is formed for the stone that is relatively coarse, which affects the ornamental nature of the stone, and it needs to be maintained. Hetian jade, Shoushan stone, and agate are treated with liquid paraffin, white tea oil, and high-grade olive oil. It is best to wash the picture stone in the river with clean water, if it is cared for and maintained with oil, it will be deposited on the surface of the stone for a long time and destroy the picture.

The rough surface of the stone, such as the Three Gorges stone or color stone can be waxed by the method of white wax melting, the effect is good after waxing, but it should be noted that the wax can not be too thick, generally the larger stone is baked on the surface of the stone with a blowtorch, and the small stone is heated in the pot to wax it, this method is mainly used in the stone that needs to be polished and polished on the surface. Use an angle grinder first, polish the surface, boil the small one in the pot and heat it to wax it, and bake the wax with a blowtorch for the big one, and polish it on the wax.

Now there are polishing machines, which are very convenient and easy to use.

Sanding and polishing with sandpaper of different grades.

1. Coarse grinding. It is required that the grinding piece has a deep amount of cutter, high grinding efficiency, coarse grinding lines, and rough grinding surface, mainly removing the saw blade traces left by the stone in the previous sequence and grinding the flatness of the stone and the modeling surface in place, 2. Semi-fine grinding.

The coarse grinding marks are removed to form a new finer texture, making the stone surface smooth and smooth.

3. Fine grinding. The fine grinding stone surface pattern, grain, and color have been clearly displayed, and the surface is delicate and smooth, and it has begun to have a faint gloss.

4. Fine grinding. The surface of the stone after fine grinding has no traces perceptible to the naked eye. The surface is getting smoother and smoother, and the gloss can reach up to more than 55 degrees.

5. Polishing. Using a special granite polishing machine, the stone is ground from the stone water grinding disc of No. 50 and No. 3000 from coarse to fine, so that the ground is bright and smooth. The polished surface of the stone is as bright as a mirror, and its gloss can reach more than 85 degrees.

Polishing does not improve the dimensional accuracy or geometrical accuracy of the workpiece, but is aimed at achieving a smooth surface or mirror gloss, and sometimes to eliminate gloss. A polishing wheel is usually used as a polishing tool. The polishing wheel is generally made of multiple layers of canvas, felt or leather, clamped on both sides with metal round plates, and its rim is coated with a polishing agent made of a uniform mixture of micronized abrasives and greases.

1. The newly unearthed rough stone will generally be covered with soil, especially the deeper stone lines are filled with dirt, many of which are tightly bonded with the original stone.

2. Therefore, before the rough stone is treated, it should be first put into a bucket and soaked for two or three days, so that the floating soil can be fully dissolved, the rough stone absorbs enough water, and the adhesion of the surface attachment of the original stone is loosened.

3. After the rough stone is soaked through, clean the rough stone with a steel brush dipped in water, and preliminarily complete the work of removing floating soil. It is recommended to prepare a few more steel brushes of different specifications, and the appropriate brush surface will achieve twice the result with half the effort when cleaning different stone surfaces, stone seams, and textures.

4. After removing the floating soil with a steel brush, then use the hand grinding machine for more detailed grinding, the grinding head specifications should be from coarse to fine, for the stone with more textures, the fine grinding head should be patient to polish the impurities in the texture to ensure that the stone surface is clean and smooth. This step is the most patient, there is no obvious treatment effect when removing the floating soil, and the sense of achievement will be relatively low, but this step is the key step to determine the final treatment effect of the stone, do not be impatient and lazy.

5. After grinding with a mill, depending on the depth of the grinding marks on the stone surface, select sandpaper from 600 mesh to 2000 mesh for the final fine grinding treatment in turn.

6. After the polishing is completed, the stone surface should be very smooth, there will be no concave and convex sensation to touch, and there is no obvious scratch in the light.

7. The above is the stone polishing method.

Stone polishing requires the preparation of materials: barrels, brushes, sandpaper, wax, polishing machine. It is divided into 4 steps. Here are the detailed steps:

Step 1: Soak the stones.

Put the lime in a bucket and add clean water and soak for 1 day to loosen the dust and dirt on the stone.

Step 2: Scrub the stones.

Scrub the surface and crevices of the stone with a brush, scrub the stone clean, and wash it again.

Step 3: Polishing the stone.

Sand the stone with sandpaper until smooth.

Step 4: Wax and polish.

Apply the wax evenly to the stone and polish it with a polishing machine.

Dear, I'm glad to answer for you. How to polish the stone Answer: Dear, 1. When polishing the stone, you can first soak it in clean water for about 2 3 days to soften and remove the dirt and impurities attached to its surface.

You can hold it in your hand again and carefully clean its surface with a steel brush, brushing away impurities on its surface and in the crevices. 2. Then, use a hand grinder for fine grinding, and the specifications of the grinding head selected during polishing should be from coarse to fine, so that its stone surface will be polished more smooth and clean. After that, according to the depth of the grinding marks on the stone surface, 600 2000 mesh sandpaper is selected to finely grind the stone.

3. After the grinding is completed, you can use a moistened cotton cloth to remove the powder and impurities on the surface of the stone. Then, use the wool wheel for one last sanding. Hope it can help you, look forward to the compliment, thank you dear.

The steps for polishing and polishing the stone are as follows: Brother

Raw materials tools: stones, buckets, water, brushes, sanders, sandpaper, polishing wax.

1. Soaking. Prepare a bucket full of water, and then put the stone into the bucket and soak it for two to three days, so that the floating soil attached to the stone can be fully dissolved, and after the water absorbed by the stone is sufficient, the adhesion of the adhesion on the surface of the stone will be loosened.

2. Brushing soil. After the stone is soaked in dust, use a brush dipped in water to brush off the floating soil on the surface of the stone, and prepare some brushes of different specifications before cleaning, so that it will be more convenient to brush the different stone joints, textures and stone surfaces of the stone.

3. Grinding with stone grinder.

After brushing the floating soil on the stone, you can use the stone grinder to polish the stone more finely, and it should be noted that the specifications of the grinding head of the grinding machine should be from coarse to fine, because the coarse grinding head can polish the stone surface smooth and clean, and the fine grinding head can effectively polish the impurities in the stone texture.

4. Sandpaper sanding.

After the grinding is completed, it is also necessary to carry out fine grinding treatment, according to the depth of the grinding marks on the surface of the stone, choose to use 600 mesh to 2000 mesh sandpaper to carry out the final polishing of the stone surface, and then touch the surface of the stone with your hands, if you do not feel the concave and convex feeling and the surface is very smooth, it means that the polishing has been completed.

5. Apply wax. If you want the stone to be smooth and bright, you can coat the stone with a layer of polishing wax, beeswax, etc., which can effectively reflect the luster and reflective effect of the stone.