If you want to configure and install a desktop by yourself, how do you solve its compatibility? 20

It seems that the landlord is still in the learning stage, in fact, the current hardware compatibility has done a good job, and now there are many configurations on the Internet to choose from, according to the basic no problem on the Internet, it is recommended that Zhongguancun ** can go to the forum where to learn There are many configurations to choose from.

Install your own machine, there are a few points to pay special attention to, first: whether the motherboard and CPU are compatible, there are many motherboards and CPUs on the market now, there are mainly two classes, one is the motherboard and CPU of Intel chips, and the other is the motherboard and CPU of ADM series, different motherboards, different motherboards CPU sockets, and the supported CPUs are also different. So, install it yourself, first choose the motherboard and CPU.

Second: memory support, how much memory the motherboard can support, how many generations of memory can be supported, how high frequency memory can be supported, these need to be considered, according to the support of the motherboard, as well as their own economy, enough to buy the right memory module.

Third: the graphics card supported by the motherboard, some motherboards come with graphics cards, needless to say, but the performance of the onboard graphics card is really not powerful, so far, there is no onboard graphics card can have very high performance, and more importantly, the onboard graphics card also needs to use CPU and memory resources, so, push to build and use independent graphics, normally speaking, the vast majority of motherboards can support the vast majority of graphics cards, but, whether the performance can be fully exerted, then it is another matter, a more advanced graphics card, the motherboard can not support it to play all the performance, it's better to buy a lower-end graphics card.

The fourth point, which is also one that 90% of people ignore, is SSD technology, including SSD hard drives, graphics cards, motherboards, etc. So far, there are not many motherboards that can really play the SSD acceleration technology well, at least they are all 9-prefix boards, so if you want to use the most commonly used B85 series motherboards on the market, you will not be able to discuss the hardware that uses SSD technology. Because motherboards can't support their highest performance.

Fifth: the choice of power supply, many people think that the power supply is not much use, it can supply power on the line, that is wrong, the power supply is very important, a good power supply, can be stable and continuous for the hardware power supply, and the poor power supply, although the voltage can be stabilized within a certain range, but it is constantly beating, the life of the hardware, has a great impact. Then the power of the power supply, the total power of the power supply, must be greater than more than 20% of the total power of all hardware electricity.

In this way, the burden on the power supply will be lighter. It can better sustain the power supply.

Sixth, that is, heat dissipation, the computer, the electronic components are constantly working, emitting a lot of heat, once the heat is too high, not only easy to burn out the hardware, but also greatly reduce the performance of the computer.

The above six points,It is the place to pay attention to when you build your own machine,Compatibility,Mainly depends on the stamen of the motherboard,As long as the motherboard and CPU can be compatible,More than 95% of other hardware is no problem。

The CPU interface corresponds to the processor support of the motherboard, for example, the AMD3 interface of AMD corresponds to the AM3 interface of the motherboard. Multi-core processors need to be fully powered, and they need to be powered by four phases or higher, and so on. AMD's CPU should correspond to AMD's motherboard, and I personally think that it may be better to have an AMD graphics card.

Heat dissipation can't be ignored either...

The number of pins in the CPU socket should correspond to the CPU, and the power supply should be paid attention to, don't be small, and use Master Lu's power measurement after the configuration is selected.

Some motherboards can only use DDR2 memory Note.

The CPU of AM3 cannot be plugged into an AM2 or 2+ board.

1.Compatible, this is the most basic, because incompatibility simply can't use 2Value for money (which can be ignored by the rich).

Matching with the graphics card to avoid bottlenecks (those who don't play games can be ignored) This is a problem that many people will ignore, but I think this is very important, I often see some friends buy a 635, but with a 5550 graphics card. Isn't your 635 a waste? The game still doesn't work well!

Hardware upgrades years later.

This one is simple.

First of all, you can choose the latest platform at presentAM3,LGA1156,LGA1366 is the latest platform at present,Especially AM3 is very cost-effective,From 2-core entry-level products,To 6-core high-end products can be matched。

Secondly, it is the power supply, if the funds allow, try to buy a slightly larger one with the power consumption of the whole machine.

5.Heat dissipation and noise, especially in summer, hey! It's nice to buy a case with side fans, but of course, it adds to the noise. Noise is hard to avoid, because you have to buy it back to know.

The assembly machine is cheaper than the brand machine, but the warranty is not guaranteed, so pay attention:

1.Can't just look at the cost performance, for example, a graphics card, although it was 5 years ago, but it can meet your needs, cost-effective, but the manufacturer has not continued to produce this type of graphics card, in case there is a problem with the graphics card in the future, some parts have to be replaced, it will be very troublesome, buy some CPU motherboards with high performance now, graphics cards can ensure that your machine will not be outdated in the next 5 years.

2.Try to buy a motherboard with good scalability, even if it is a little expensive, it doesn't matter, the computer updates quickly, and your computer still maintains good performance after changing something.

3.Power supply Chassis one to buy a good heat dissipation People who use desktops know that the desktop is relatively loud The main reason is a fan The other is to see whether the chassis is standard Pay attention to the installer The installation process Is there a stuck place There must be a good chassis drive After the hard disk is installed, the sound of booting is very small If the sound is loud, you have to change the chassis.

The most important pieces of hardware for a desktop computer are:

1) Motherboard; (2) processor; (3) memory modules;

In other words, the first thing to consider is the compatibility of these three.

1) Usually, the motherboard determines what processor can be used, so once you have chosen the motherboard, you can choose the processor. For example, the current popular Intel platform: motherboard B150M, the socket is LGA1151, so the processor should choose the high-performance i5-6500.

2) The purchase of memory modules. What memory modules can be used is also determined by the motherboard and processor. For example, if the B150M motherboard is paired with the i5-6500, you need to use DDR4 2133MHz memory modules, where DDR4 is the technology algebra (which also determines the slot) and 2133MHz is the frequency.

3) The rest of the hardware, such as graphics card, power supply, hardware is easy to decide.

Be... The motherboard is directly compatible with CPU, memory, and discrete graphics cards.

Mainly consider the compatibility between motherboards, CPUs, and memory, and then consider graphics cards, hard disks, etc. if necessary.