PROBLEMS WITH INSTALLING THE GHOST VERSION OF WINDOWS 30

It should be a hard disk problem Check it with software I have encountered a hard disk i o error it is better to repartition.

If that doesn't work, check the hardware.

The simple question is your computer hardware and system drivers and the one you use.

ghost has a conflict, can't do it, and it's normal, just change to a normal installed version.

1。Your C drive is not set as the function partition.

2。The disk partition table is wrong, and if you have installed a restore wizard or the like before, and you have not deleted it, these problems will occur. The reason is that there is an error in the partitioned table.

The solution is: Enter the command fdsik mbr under dos or find this software fdiskfix to fix the hazard partition table.

If you make sure that there is no problem with your hardware, it should be that the main boot sector is broken.

Recommendations:1. Boot the computer with a 98 boot disk and use the fdisk mbr command to restore it.

2。Repartition, format!

If the computer system goes bad or crashes, it is common to manually reinstall the system to solve the problem. Unfortunately, a user recently reported that he encountered a prompt problem when ghost or one-click recovery (A: , I don't know how to deal with it.

What should I do? Next, let's take a look at the specific solution to this problem.

What's wrong with it?

This error indicates that there is an error in the GHOST recovery process, and an error is encountered when saving the error message to a file under the A drive, that is, no A disk cannot be saved to this location, but the A disk is not the main reason, but the GHOST system image or hard disk causes the GHOST system installation to fail.

Various possible causes and how to deal with them:

2. If the installation disc is scratched or there is a bad track in the installation U disk, you need to check whether there is a problem with the disc and U disk, and try to replace the new disc and U disk;

3. If the optical drive is aging or the optical drive is faulty, the disc image cannot be read, and the U disk is used to install it.

4. The local hard disk has bad sectors, the hard disk has bad sectors, the system cannot be written to the hard disk, and the C drive is formatted in the U disk PE environment;

5. The memory is not compatible with Xiaosen, if there are two memory modules, but the frequency of the model is inconsistent, it will also lead to failure, replace the memory of the same brand or frequency, you can also keep a memory first.

6. There is a problem with the hard disk partition, try to repartition and then install the system.

7.This can also happen when there is a problem with memory;

8.Overclocking, recovery failures due to unstable overclocking.

That's it for you to deal with errors in the computer installation system. If you're in the same situation, follow the steps above!

Because the format of the disk supported by the win7 system is NTFS, there will be an installation error in the case of your C disk or FAT format, or you can't find the hard disk, then you can enter the installation CD, select the disk partition tool, format the C disk into NTFS format, and restart the installation.

The only way to re-install the C drive is to convert it to NTFS.

You're not going to install a dual system, are you?

Ghost's win7 system installation method is the same as xp's.,Restore it directly to the C drive.,It's not OK.。

If there is a serious error in the hard disk, then you will first enter the PE system and re-partition the C disk and then install it on the line, if you have a dual system, set up two main partitions, and after completion, boot under the repair under XP, reboot to complete the installation.