How do I format the system disk with Ghost Kolon Edition? 10

You can boot the system with a ghost drive, and format all disks after entering DOS, the command is :format x:

X is the specific disk you want to format.,After formatting, you can ghost the system to the C disk.。

However, the ghost system itself is not safe, it is recommended that you use a new installation of the system disk that has not been modified by yourself, and you can repartition and format it when installing, or full Chinese interface.

Turn on the computer and press F8 to enter the safe mode, right-click all disks except the C disk and select "Format", and then immediately use the cloned disk to make the C disk.

Buy a Ghost XP disk. There is an option to repartition above. Repartition. There's nothing left on it. Like a new hard drive. Then restore the C drive in one click. That's it. (This plate is 3 yuan).

After booting up with a disc, there are a few options: you can choose to go to the DOS tool and run Format C: (if you want to format other disks, turn C into D, E, F, G).

There should be some DOS toolbox or something, select DOS, and then enter.

format e: /s/q

format d: /s/q

format c: /s/q

That's it,

There are four quick-format disks in the clone disk.

First of all, you used the wrong command, the main ghost command has backup and recovery, and the recovery is divided into mirroring the first coincidence to the partition, mirroring to the hard disk, according to the hidden key capacity of our backup, in most cases we use the mirror to the partition method.

The landlord chose the way of mirroring to the hard disk with the wrong command, that is, to overwrite the content of a mirror to the entire hard disk, so that the content of the original partition was formatted and overwritten.

Secondly, all the original data in your hard drive is difficult to recover because it has been overwritten or destroyed.

Finally, if your image file is still there, to recover the hard disk partition, it is best to find a ghost software with PQ first, you can choose this option to repartition the hard disk after restarting, and you can do it specifically. After the partition is completed, exit PQ or restart the computer, go to Ghost, and re-select the method of mirroring to the partition. （img→partition）

The steps to reinstall the system and format the hard disk with ghost are as follows (take the ghost disc as an example):

1. Prepare the system CD: If you don't have it, you can go to the computer store to buy it, and you can buy the latest version of the CD of whatever system you need to install. If you have a burning CD-ROM drive, you can also go online and burn the system files in ISO format to a system CD.

2. Set the CD to boot: press the del key (the notebook is generally F2 or the hotkey prompted at the bottom of the screen) to enter the CMOS after booting, and set the CD drive (CD-ROM or ***-ROM) as the first boot item in the boot tab (or startups) (the old motherboard needs to enter the Advanced BIOS Features tab, press enter at the "1st boot device", and then select CD ***-ROM), Press F10 again to save and exit the reboot. Some new motherboards support pressing F12 or F11 to enter the boot options menu after booting, and you can directly select the optical drive without entering the CMOS interface.

Insert the system disc into the optical drive in time when you restart the computer. After the system is reinstalled, pay attention to setting the hard disk as the first or second boot item.

3. Format the hard disk: After the disc is successfully booted, the startup tool function menu will appear (as shown in the figure below).

At this time, you can move the cursor and select the fifth item (or directly press the number 5 key) and select "Quickly divide the hard disk into four partitions", then the ghost program will be run and the file will be automatically loaded to clone the hard disk into four partitions and formatted.

You can also select the sixth item in Figure 2, run the DiskGenius graphical partition tool, enter the operation interface, select the partition to be formatted, right-click and select "Format Current Partition".

4. Clone and install the system: return to the function menu after completing the formatting operation, select "Install the system to the first partition of the hard disk" in the menu, press enter to confirm and follow the prompts to operate, or after entering the PE system, run the "one-click installation system" on the desktop, the computer will automatically run the ghost software to automatically load the GHO file and clone and install it to the C area, the whole process basically does not require manual intervention, until the last entry into the system desktop.

Note: After the installation of the system is completed, first install security software such as 360 Security Guard plus 360 Antivirus or Kingsoft Antivirus and other security software, conduct a comprehensive check and kill Trojans and viruses, and then patch the system, install common software, and install a one-click restore tool for system backup, in case of emergency.

Enter the PE interface and format or partition it with diskgnius.