The old machine is fine with ADSL, but the new machine ADSL is unstable

The motherboard compatibility of AMD processors is not very good, this is known to everyone, have you ever thought that the compatibility of the machine is not good?

Have you ever wondered if it's a motherboard or network card problem?

You can upgrade the motherboard network card driver first (generally the network card driver is integrated on the motherboard driver).

If it doesn't work, install another network card to see.

If it still doesn't work, please tell me the brand and model of all your accessories, and I will help you analyze it.

My opinion is: your network card driver problem, the driver is either incorrect or incompatible, it is recommended to manually selectively redrive. dell machine is generally the motherboard driver directly drive the network card, its function is not the same as the popular machine on the market, it is recommended to go online to find the same model of dell network card driver, do not use the disc direct motherboard driver.

Generally, the NIC driver is integrated on the motherboard driver).

The data light does not flash: then there must be no data to enter, that is, only receiving, not sending, there are 2 possibilities, 1 is the cat's problem, listen to your explanation, you can rule it out; 2 is a problem with the network card, I guess the driver is an old version or too advanced.

Network cable problem: It may be that the crystal head is in poor contact, dizzy, this network can't be connected, how to disconnect for a period of time, it's really talented.

Hope it helps.

At this time, the indicator light of the cat's power and link is also on, and the data light does not flash.

The data lights are not flashing. How can you still have data to enter!?

Obviously the cat's problem, see if the line is loose. Close and open again.

If it doesn't work, change to a cat.

It's the same with my office. Once there is data, once there is no data. It's almost time to stop.

I've had disconnections before for no reason. Let me start with my previous question. I dropped in 10-30 minutes.

After dropping, the ADSL indicator is normal. But the computer is disconnected. Tap Broadband connection can't be turned on.

You can only reconnect your computer by restarting it. My workaround is 1 update the XP system. Patch system vulnerabilities.

It won't be disconnected after all updates. 2 Change to an XP version. Install an up-to-date version of the XP system.

I guess it's a disconnection caused by a system vulnerability or a Trojan that comes with a pirated XP system. Your problem should be the same as my previous one. It should be possible to solve it according to my method.

Ask others if the situation is similar.

Call 10060 and let the Netcom maintenance staff come - faint Why don't you look for them for this kind of thing (I am also a Qingdao Netcom ADSL user).

Cause of the problem and solution: A large reason is that the quality of the line is not good, if the quality of the line is not good, the line is often disconnected, which will seriously affect the browsing speed. **Online interference is relatively large, such as the use of extensions, parallel connection with **, the use of sub-parent machines, and ** with anti-theft devices, which will affect the connection effect of modem.

Sometimes the performance of the computer port is unstable, and the rate of the serial port can be appropriately reduced. Sometimes it can be solved by software (as the newspapers have said before) The solution is: click "Start Settings Control Panel Modem", select "Properties Connection Page Advanced Options" from Modem, and fill in "S10=50" and "S25=200" in the additional settings, where the former can force the Modem to remain connected for 5 seconds when the carrier is temporarily lost, and the latter can force the Modem to stay connected in DTR (Data Terminal ready, the data terminal is ready) to maintain the connection state for 2 seconds when the signal is instantaneously invalid, so as to avoid the disconnection fault of the modem when the line transmission quality is poor.

I changed the ** wire, connected the ** wire directly to the moden, added the parameters of "s10=50" and "s25=200", and the problem was solved.

This kind of problem is very troublesome for the general user to solve by himself, even if it is solved, it will take a lot of energy, and it is not cost-effective, so if you are not the kind of person who has to get to the bottom of it, listen to the advice of your brother, and go to the Netcom operator who installs broadband for you, this problem belongs to them!! And now there are generally computer repair centers, you can go to them, spend a little money, and it will be solved! It is recommended to go to the operator!!

Call 10060 to let Netcom maintenance personnel come to this kind of thing, why spend such a high score. Hey, the customer service is very bad?

You give 10060 a dozen **, it is highly recommended to change the adsl of the double glue line

Find customer service to repair, free replacement of cats, new cats are still good, I just replaced, they will help you debug!

The network cable problem may be the poor contact of the crystal head from scratch.

Is your system XP SP2, yes, you have to modify the number of connections, as for the forced shutdown, in order to boot the computer, this should be something else.

This value pulls. However, let's take a look at the monitor to see if there is a problem.

Because this machine is actually the most valuable thing is that monitor, and the others are not very valuable.

That's right, that's a good configuration. It's okay to go online and watch movies! It's worth it.

Internet access is enough, if the hardware is okay, the price is right, the display is good, the main thing depends on whether the hard disk and the monitor are good.

Just go home and change the hard drive, it's okay, the graphics card is poor, but you don't play games, the machine is still straight.

Second-hand machines mainly pay attention to hard disks, which should still be within the reasonable range.

If it is really this configuration, it is very cost-effective not to be scammed.

You have to pay attention to whether there is a problem with the monitor.

If there is no problem with a 20-inch monitor, it can be sold for 400-500 alone.

Mainly check the display and the hard disk for bad sectors.

That monitor seems pretty good.

I don't think it's worth it! I don't know how long it will take. How much does it cost to buy a new one?

Is the CPU a Sempron 2200+? It seems that there is no Sempron 1200 processor, if the machine is more cost-effective, the machine is mainly a mouse and keyboard monitor are good, enjoy the type. Attention should be paid to the detection of hard disks, because 40G hard disks are basically overdue service until now, there is a great possibility of bad sectors, usually with a lot of effort, and there is a danger of hanging up at any time.

First of all, it depends on what system you install from the new, you can change a version (if you use the D version, you can change a few more, the current system disk has been optimized, sometimes the optimization is too much, hehe).

If it doesn't work, I want to rule out other reasons, the only thing left is the compatibility problem, if the network card of your old machine is independent, remove it and install it on the new machine, and try it.

Slow internet access?

Are you sure the system is installed correctly?

Sometimes it can also be a problem with the contact of the crystal head.

Don't listen to the fools.,It's a matter of the network card driver.,Dual-core and the driver is different from the single-core,You find the Netcom staff OK.,My original is also the same situation as yours and often drops the line.,Later, I found it.,They gave the next driver on the Internet to replace it.,It's all good,

Definitely it won't affect.,If you're sure that 1 old computer has an impact.,I think it's only a radiation problem.。。。 The radiation emitted by the old computer is relatively large, which affects the data transmission of the **line,**The wire is not as reliable as the twisted pair or coaxial cable,Solution。

1: The old computer is placed in a place where there is no **line, (the one in the wall is also counted, the layout of your own home, not to mention that you should also know that the **line is in**).

2: Actually, it's all psychological reasons...

3: It's good to get used to it.

Are the two computers connected? If so, just unplug the network cable and try to see if the same problem still occurs, if there is still the same problem, find a new antivirus software security mode to fully disinfect the virus, but also check for malware and clean up.

This won't have an impact. If you and your parents use the same network cable, they will definitely be stuck.。。

I think it's most likely an IP conflict, you see if your computer is a dynamic IP, if it's static, see if it's the same, if it's the same, just get the IP again.

A few simple steps:

Check for viruses and turn off antivirus software and other self-starting software.

If it is still slow, please reinstall the original version of Windows, do not modify the version of the fastest and easiest way.

Other software on your computer is running in the background, do you see if there are more programs in the near range that you haven't seen before?

You start -> run ->msconfig and remove all the useless ones from the startup, leaving only the ctfmon one.

This light is a signal light that communicates with the ADSL signal of the telecommunications bureau, to put it simply, this light can be synchronized with the ADSL of the telecommunications bureau and there are no other problems, you can access the Internet; But this light flashing means that it cannot be synchronized with the ADSL signal of the telecommunications bureau, and it cannot be connected to the Internet.

There are many reasons why this light is not lit, there is a problem with the signal source of the bureau, there is a physical line failure, there is a modem failure, a separator failure, the above reasons may cause the light to keep flashing or not lighting, resulting in not being able to slide on the travel network, it is recommended to encounter this situation, as soon as possible and guess the telecommunications operator you use to contact the solution, if you are familiar with the weak current, you can first check whether the line has poor contact, whether the machine can be played normally. If you can, try another modem or splitter, if it really doesn't work, then find a telecom operator.

Hehe, it's not about reducing the workload for telecom operators, but sometimes the speed of telecom staff, it's really slow...

Other people's computers are good, indicating that the city voltage is normal, there may be a problem with your wire voltage alone, the computer is restarted, normally it is the reason for the poor power quality, you buy a good brand power supply, such as Huntkey, Big Buffalo, Colorful, Jinhetian can be, the Great Wall City is fake.

If the computer automatically restarts, it is estimated that the voltage on your side will not even be V180. In this case, you can only buy a regulated power supply or a UPS with a regulated function!

When you're hungry, you'll wake up from sleep. There is money to buy a voltage stabilizer. If you don't have money, you can't do anything. This is the problem of the integrated transformer of your power supply bureau.