After a long time, the tiles may fall off partially, what are the tips to restore the tiles to their

Modern people will prefer tiles when decorating their new houses, including but not limited to floor tiles, wall tiles, etc., but after a long time, they will find more or less problems, once there is a problem, it will look very ugly, and I can't bear to look at it directly, what should I do at this time? Is it all lifted and re-bricked? This is too time-consuming and cost-effective, you can learn about the repair methods of tiles, and find solutions for specific problems, which can restore the tiles of your home as good as new.

Floor tile repair agent

This thing is everywhere on the Internet, apply the repair agent to the location of the scratch, and then wipe it again after it is dry, until you can see that the scratch is reflective from the side, secondly, if the scratch is very deep, you can try to use a water mill to grind and polish, but you must be careful when grinding, and then be careful, otherwise it will be easy to have the problem of pits, but this is also more common and easy to get, and the seller will generally come with a tutorial.

Paint or nail polish

You can buy some games or nail polish that are the same color as your own tiles to repair, the repair method is very simple, just like toothpaste, first clean the tiles, and then fill in the paint or nail polish, and seal the wax oil, or it won't take long to make the tiles as new as ever.

The finish junction is disengaged

If the tile itself is intact, but the junction of the finish is detached, at this time, you can first clean up all kinds of stains at the joint, and then inject epoxy adhesive, and after it is completely dry, use waterproof flexible caulking material at the joint, and easily restore it to the original.

Find a professional master to clean up, generally the property has a professional person to clean up, can be restored as before, there may be some costs.

You can find a master to re-apply the glue, generally speaking, the glue is sticky, so that it can be fixed for a long time.

If the tile itself is very intact, but the junction of the finish is disconnected, at this time, you can first clean the various dirt at the joint, and then inject epoxy adhesive.

Remove it and re-pave, at this time the adhesive used in the paving is particularly important, if the tile area is small, you can use the cement of Yi, which is more adhesive than cement.

There is no good way to do it, so be sure to find a renovation company to redecorate it for you.

Tik Tok is a great thing that you can learn a lot of tips on how to fix these tiles.

First, the seams are cleaned of various dirts, and then epoxy resin adhesive is injected, and after they are thoroughly dried, waterproof flexible caulking materials are used at the joints.

This can be re-glued by the master, generally speaking, it is glued, so it's fine.

Reason 1: 1, the cement mortar is not evenly smeared 2, the wall is not cleaned before paving 3, the wall foundation is not watered 4, the tile problem 5, the cement mortar problem 6, the knocking after the tile is paved.

Repair method:1Use the composite standard cement yellow sand to re-apply the tile repair 2The effect of using MS glue to paste tiles is much better than that of traditional cement yellow sand tiles, which saves the material cost of cement yellow sand and reduces the labor cost a lot, and improves the construction efficiency at the same time.

Greenridge MS modified silane glue, all properties are excellent, sealing and waterproof, high and low temperature construction, the highest adhesion force reaches 30kg square centimeters, with good thixotropy and extrusion, the environmental requirements are not harsh, in the weather of -50 to 150, the performance will not change. Strong weather resistance, the colloid itself will not produce bubbles, and can resist rain, snow, and ultraviolet rays. Long-term exposure to the harsh environment of the outdoors can effectively inhibit and avoid cracking, breakage, yellowing, mildew and degumming of the sealant.

Moreover, Greenridge MS glue has zero formaldehyde, zero isocyanate, solvent-free, non-toxic and tasteless, and the VOC emission is far lower than the national standard, which does not damage the environmental performance of the substrate. It has a wide range of adhesion to substrates, and most inorganic, metal, wood, concrete, ceramics, glass, stone, etc. have good adhesion properties.

Instant fast adhesive is a ready-to-use product. When using, apply a thin layer of glue on the surface of the wall and the back of the tile, let it dry for a few minutes, and when the glue surface is not sticky when touched by hand, the wall can be pressed, which is very convenient to use. JD-503 tile adhesive, the product is white powder, add water to make a viscous glue when using.

This product not only has a strong adsorption force, but also has a certain amount of time to make paste adjustments, and the adjusted glue should be used up within 4 hours. Generally, the thickness of the plaster is between 3 and 5 mm. 903 multifunctional construction adhesive is also a direct use product, this product has high adhesive strength, can be adjusted within 2 hours, and the thickness of the squeegee is 2 mm, which is very convenient to use.

Find a professional tile seamless reinforcement and repair team.

Why do the tiles fall off when decorating a new house? Pay attention to these points!

There are two ways to repair tile peeling:

The first 1. Put the old cement in the place where the tiles fell off clean.

2。Soak the tiles for a few minutes, then soak the cement to the same extent as soybean oil.

3。Take out the tiles and dry the water on the surface, then apply the cement evenly to the tiles (the thickness is about the same as the original grout).

4。Just knock it flat with wood.

Once the wall tiles fall off, the first thing to check is the cause. Normally, if the cement mortar layer of the fallen wall tiles is strong with the wall, then the loose wall tiles around it are also lifted down and repaired together with the original fallen bricks. According to the peeling area, a bucket of 903 glue, a kilogram of white cement and some wall tiles of the same color and specification are purchased for repair.

It is advisable to hire a professional bricklayer, but if the amount of work is relatively small, it is often relatively expensive. In addition, it is necessary to master some paving methods to better grasp the quality of the project. Tiling generally adopts the five-point pasting method, that is, the four corners of the brick and the center of the brick are smeared with 903 glue, the brick order is from bottom to top, the gap between the bricks and the bricks should not be less than millimeters, and the last row of bricks should not be hard plugged, and the edge should be ground with a grinding wheel to ensure that the gaps are uniform and consistent.

When the bricks are pasted, you should also pay attention to the cleaning of the wall tiles. Use white cement to hook the joint, the jointed cement can be held into a ball by hand, use a tool to press the cement into the joint between the bricks and bricks, and finally wipe the brick surface with a rag, and the brick repair process is completed. This method of repairing bricks, saving labor and time, can be completed in one or two hours, and it is completely possible for skilled people to do it themselves.

The second type 1Wash the mortar on the back of the tile and dry it in the shade.

2.Smash a small pit on the adhesive mortar (that is, the cement mortar on the wall) of each tile, 2 points at the top, middle and bottom, the size is 20mm, and the depth is about 5mm. Clean up the dust, loose cement slurry, etc. in the pit.

3.Fill the small pit with a high level of glue (stone glue) about 2mm, be careful not to fill it too full. Exam Forum.

4.Stick the peeling tile back before the glue sets, and gently tap it with a small hammer until it is flat with the rest of the bricks.

Note: The gel must be used with the mixture, and the amount of coagulant should not be too much, otherwise the solidification will be too fast, and too little will be slow to solidify.

Owners and friends who use tiles in the decoration will find that the house has lived for a long time, and the tiles have begun to fall off. In fact, I want to tell you that you don't have to worry about this kind of problem, as long as you know what is the reason for the tile to fall off, and how to deal with the tile falling off.

Clause. 1. Fall off and re-paste.

When the tiles fall off directly due to improper construction or aging problems, how to paste the bricks back again, in addition to the necessary basic process, there are also different treatment situations according to the mortar of the residual wall.

Clause. Second, the mortar is not loosened.

If the mortar is not loosened, but the tile falls off, you can first scrape the mortar adhered to the back of the tile and Shengzhishen, and then mix a little cement with 107 glue to stir it into a paste, evenly coat a thin layer on the back of the tile, and then press the tile to stick firmly.

Clause. Third, the mortar has peeled off.

If the mortar falls together with the tiles, it is necessary to gently chisel some pits on the original foundation surface, and then re-inlay the mortar mixed with 107 glue, and press the falling tiles on the foundation surface after brushing a layer until the mortar hardens. It should be noted that if the tiles are only partially falling off, do not hit the mortar on the foundation surface to prevent the original solid tiles from being loosened.

Clause. Fourth, the junction of the veneer is disconnected.

The old tiles are still intact, but they are disconnected from the joints, and the sand and plaster at the joints can be removed first, and then epoxy resin adhesive (all-purpose adhesive) can be injected into the joints.

Maybe the quality of the tile itself is not very good, and the quality of the tile at different prices is not the same; When decorating, the strength of the workers may be relatively large, and then the tiles will be shattered; You can clean up the cement on the back of the tiles on the wall, and then soak the tiles in water for a while and take them out to dry, then re-paste the tiles on the wall, and knock them flat with wood.

If the tile is not soaked in water properly, it will also cause the phenomenon of falling off. If the surface of the tile is too dry, it will greatly affect the bonding effect between it and the adhesive layer, which will lead to peeling off. Before laying tiles, the base layer of the wall and floor needs to be treated, and if it is not treated properly, the tiles will also fall off.

If only the tile falls off and the mortar remains on the wall and the ground is not loose, the solution is to scrape the remaining mortar on the back and side of the tile, and then apply an even layer of mortar on the back of the tile and press it back into place.

It may be because the base layer of the wall is not clean, or the moisture of the glue is not enough, or it may be that the cement mortar is too thick or more water is added; The place where the tiles fall off, clean up the cement grout on the back of the tiles, soak the tiles for 5 minutes in advance, and then lay them on the wall, and knock them flat with wood.

Ceramic tile is the most common wall and ground decoration material, if we are paving tiles, the construction process is not up to standard, etc., it will be easy to appear that the tiles fall off the situation, so how to repair the tiles at home? Next, I will briefly introduce it to you.

1. When the tiles fall off, we need to re-pave the tiles. According to Qeeka Home experts, if it is a large area of tiles falling off due to the mismatch of tiling materials or substandard construction technology. We had better shovel off all the tiles, buy the right tiling materials, and re-pave the Youzique tiles in accordance with the standard construction process.

2. If only individual tiles fall off, we will clean up the cement mortar on the place where the wall tiles fall off and the back of the tile; Then we will soak the tiles for 5 minutes in advance and then take them out to dry; Next, mix the cement mortar according to the specified proportion, paste the tiles on the wall with cement mortar, and knock it flat with wood. If we are pasting with tile adhesive, the tiles do not need to be soaked in water, as long as the foundation conditions of the pavement are good, they can be constructed.

3. Or we can use stone glue to glue the tiles well. We can wash the mortar on the back of the tile and dry it in the shade; Then the cement mortar on the wall smashed out two small pits at the top, middle and bottom, and cleaned up the dust and cement slurry in the pit; Next, fill the pit with stone glue, paste the peeling tile back before it solidifies, and knock it flat with a small hammer. After the tiles are dry, we are filling the gaps in the tiles with a grout.

We should pay attention to the water absorption rate of ceramic tiles when paving tiles, and the water absorption rate of ceramic tiles is not up to standard, and it is easy to make hollow drums fall off; If the base layer of our wall and ground is not properly treated, it is easy to loosen and fall.

This may be due to a collision or uneven application of cement when sticking. You can re-glue it, deduct the cement from the inside, and use glass glue to make styrofoam cement.

Check the back of the tiles. If the back of the tile is clean, it may be paved with material, which is not suitable for tile material. The tile has good density and can achieve zero water absorption.

It is also relatively difficult to pave. When laying floor tiles with cement mortar, there are many hollowing and falling off. The cement mortar has a low grade and slow early strength.

When shrinking and solidifying, it is easy to fall off without strength.

Check the back of the tile, if the back of the tile is clean, it is possible to pave the material, which is not suitable for the tile material, and the floor tile density is good, and it can achieve zero water absorption. The relative difficulty of paving is also very high, the cement mortar paves the floor tiles, there are more hollow drums falling off, the cement mortar is low in the marking, the early strength is slow, and there is no strength in the shrinkage and solidification time.