What is aluminum foil tape used for, and what is aluminum foil tape used for?

Aluminum foil tape, using high-quality pressure-sensitive adhesive, has good viscosity, strong adhesion, anti-aging and other characteristics, this kind of tape is very widely used, such as refrigerators, air carving, automobiles, petrochemicals, bridges, hotels, electronics and other fields.

1. The roll tape coated with acrylic glue with high-quality aluminum foil and compounded by anti-sticking paper has strong adhesion, good temperature resistance and is not easy to age. It is used for the fixing of evaporation pipes of air conditioners, freezers and other refrigeration equipment. 2. With glass wool cushion pressure compound, it is used for the insulation of automobile heat insulation pads, which is the kind that we usually use in air conditioners and refrigerators, which is not very reflective.

Aluminum foil tape can also be wrapped with other pipe insulation cotton sound insulation cotton materials, suitable for refrigeration, such as indoor air conditioning pipes, refrigerators, water heaters, roof waterproofing, temporary sealing of pipes, hot pipe encapsulation, BGA computer motherboard circuit board welding insulation, flue sealing, automobile air conditioning, car exhaust pipe leakage insulation, fuel tank leakage repair, cabinet perimeter sealing, etc., your home pots, bowls, basins, etc. can also be used to make up! Fill the leak in the roof! Door and window sealing leakage!

Water heaters, range hoods, air conditioning pipes are bundled and fixed, kitchen oil isolation, metal products repair, emergency repair, anti-rust function, shielding and anti-interference effect.

Qingdao Yongguan Changde Co., Ltd. cooperates with large factories and enterprises, with low cost, quality assurance, and close cooperation with AUCMA and so on. It is widely used in industry and is the preferred partner for factory materials.

Aluminum foil tape is a special kind of tape, which has the effect of heat preservation and shielding electromagnetism. Aluminum foil tape is used for the seam pasting of all aluminum foil composites, the sealing of the puncture of the insulation nail and the repair of the damage. It is the main raw and auxiliary material of refrigerator and freezer production plants, and it is also a must-buy raw material for the distribution department of thermal insulation materials.

Uses of aluminum foil tapes:

1.Aluminum foil tape is widely used in refrigerators, air blanks, automobiles, petrochemicals, bridges, hotels, electronics and other industries. Aluminum foil tape can also be used in various transformers, mobile phones, computers, PDAs, PDPs, LED displays, notebook computers, photocopiers and other electronic products in the need for electromagnetic shielding.

2.If the purity of the aluminum foil is higher, the aluminum foil tape has the ability to eliminate electromagnetic interference and isolate electromagnetic waves. Avoid the most human injuries. Aluminum foil tape will not affect the normal function of electronics.

3.Aluminum foil tape is used for the seam pasting of all aluminum foil composites, the sealing of the puncture of the insulation nail and the repair of the damage. It is mainly used as the main raw and auxiliary materials for refrigerators and freezer production plants, and it is also a must-buy raw material for the distribution department of thermal insulation materials.

It can also be used to wrap the steam duct to prevent the temperature from being lost outward.

4.Aluminum foil tape can be used in various electronic products such as transformers, laptops, computers, mobile phones, PDP, PDA, LED displays, copiers, etc., and its main role is to play an electromagnetic shielding function. It can be used outside the steam duct to prevent temperature loss.

Aluminum foil tape can also be used in refrigerators, air carving, automobiles, petrochemicals, bridges, hotels, electronics and other industries.

Aluminum foil tape use: 1. It can wrap the gas pipeline, for example, if there is a hole in the pipeline, it can be wound with aluminum foil glue. 2. It can be used to repair some gaps, if there are cracks in the refrigerator or steam pipes, it can be pasted with aluminum foil.

3. It has the effect of heat preservation, which can effectively prevent heat dissipation. 4. It has anti-radiation effect and is widely used in the electronics industry.

Precautions for the use of aluminum foil tape:

1. Before using aluminum foil tape, clean the part of the substrate that needs to be used. Remove floating ash and stains. Because it is usually used in electronic products, it cannot be wiped with water or a damp cloth, and it should be cleaned with a dry cloth or a dry brush.

2. After cleaning, you can tear off the aluminum foil tape and start the operation. The aluminum foil tape uses high-quality pressure-sensitive adhesive, which is very sticky, so it is necessary to determine the position that needs to be connected, otherwise it will be more troublesome to tear it off again if it is crooked.

3. After pasting, press the aluminum foil tape several times with your fingers to make the adhesive layer fully functional and tightly bonded. If any excess glue spills out of the edges of the tape, carefully remove it with a razor blade.

1. Sealing and waterproofing: aluminum foil tape is a kind of composite material, which can be mainly used to repair some gaps, such as refrigerators or air conditioning lines cracks, you can use aluminum foil tape to paste, which plays a sealing role and has a waterproof effect.

2. Anti-radiation effect: Aluminum foil tape also has anti-radiation effect, so it is widely used in the electronics industry, and our mobile phones or computers, etc., can be sealed with aluminum foil tape.

3. Prevent aging: It can also wrap the gas pipeline, for example, if there is a hole in the pipeline, it can be wound with aluminum foil tape. The gas pipeline can be used again without failure.

For example, cars can be repaired with aluminum foil tape to prevent the pipes from aging.

4. Thermal insulation performance: aluminum foil tape also effectively prevents temperature dissipation, it plays a role in thermal insulation, if there are cracks or no cracks in some steam pipelines, they can also be pasted with aluminum foil tape, which can effectively prevent the aging of pipelines and avoid heat dissipation.

The above content is an introduction to what role aluminum foil tape has, and the role of aluminum foil tape is still relatively extensive. For example, it can repair damaged traces, and can also resist radiation, bandage gas pipes, prevent temperature dissipation, and so on.

Aluminum foil dust backshine tape is used for the following purposes:

1. Aluminum foil tape can be used for the seam pasting of all aluminum foil composite materials, the sealing of the puncture of the insulation nail and the repair of the damaged part;

2. Aluminum foil tape is the main raw and auxiliary material of refrigerator and freezer production plants, and it is also a must-buy raw material for the distribution department of thermal insulation materials, which can be widely used in refrigerators, air wide withering, automobiles, petrochemicals, bridges, hotels, electronics and other industries;

3. Aluminum foil tape can be used in various electronic products such as monitors, laptops, photocopiers, etc., where electromagnetic shielding is required;

4. Aluminum foil tape can be used to wrap the steam duct to prevent the temperature from being lost outward.

Aluminum foil tape is made of aluminum foil, fiberglass cloth, silicone isolation paper bonded, coated with acrylic glue, peeled.