I don t have an audio device on the bus in my computer, and it doesn t work after pressing the drive

The simplest, easiest, and most effective detailed way to do this is to go straight to.

**"Driver Wizard" software, must be the latest, the old version of the "Driver Wizard" is not easy to use, after installing it, double-click to open the Driver Update Automatic Installation to start the update, it will automatically search for the latest most suitable for you all drivers on the Internet, it will automate** and automatically complete installation, you don't need to do it at all. The best thing about this software is that if you are missing a driver, it will help you find the most suitable one, and if your driver is broken, it will be automatically updated and fixed.

Isn't it very, very convenient, and it is recommended for people who don't know much about computers to use this method. If it doesn't work, I must first answer and then I 314345040, because in this way the computer will prompt me in time, what problem is, I can also open the webpage in time to understand your specific problem, and I will do my best to help you solve your computer problem.

If it's an ati graphics card, it may be a sound card with a graphics card, install the graphics card driver, and then only install the graphics card's driver in the options.

If it's not an ATI card, it may be that the sound card driver of the motherboard is different from the driver in the disc that comes with the motherboard, so it's best to go to the network to drive, the common ones are ADI, CMI, ST, ALC. The most effective way is to turn off the power, open the chassis, check what model the sound card soldered on the motherboard is, and then go to the corresponding model of the drive home**, I'm tired, I said so much, I don't know if you understand?

ATI graphics card?

It could be HDMI output.

Summary. Cause 1: The sound card driver is not installed or there is a problemHow to solve the problem:

We can go to the device manager to see if you have a sound card driver, if there is a driver we can update it, or use 360 driver master to detect and upgrade the sound card driver Reason 2: The audio service is not started 1. In the computer management interface that opens, find and open the service items under "Services and Applications". 2. Find "Windows Audio" under the "Service" interface on the right and double-click to open it to modify.

3. Switch to the general item and start the WindowsAudio service. 4. In the pop-up prompt box, it prompts that the permission has been successfully obtained, and we click OK to enter the next step. Reason three:

Audio setting question 1, we first right-click on the small speaker in the taskbar, and select [**Device] in the pop-up menu; 2. Right-click in the interface box of the uninstalled audio device, and click Show Disabled Device in the pop-up menu, at this time we can see the disabled device;

Reason 1: The sound card driver is not installed or there is a problemSolution: We can go to the device manager to see if you have a sound card driver, if there is one, we can update the code driver, or use the 360 driver master to detect and upgrade the sound card driver Reason 2:

The audio service is not started1. In the computer management interface that opens, find and open the service item under "Services and Applications". 2. Find "Windows Audio" under the "Service" interface on the right and double-click to open it to modify. 3. Switch to the general item and start the WindowsAudio service.

4. In the pop-up prompt box, it prompts that the permission has been successfully obtained, and we click OK to enter the next step. Reason 3: Audio setting problem 1, we first right-click the small speaker in the taskbar, and select [**Device] in the pop-up menu; 2. Right-click in the interface box of the uninstalled audio device, and click Show Disabled Device in the pop-up menu, at this time we can see the disabled device;

3. Right-click and click: Speaker, Rock with in the pop-up menu window, left-click: Enable Click OK to save the settings!

Similarly, if you currently have a headset connected, right-click on the headset icon and select [Enable Bending] to use the headset to listen normally**.

Operating computer: Lenovo Geekpro2022

Operating system: Windows 10

The computer can't find the audio output device, and the solution is as follows:

1. Start by clicking on the bottom left corner, then open the control panel and select System & Security.

2. After that, click on Troubleshoot Common Computer Problems under the Action Center.

3. Then click on the audio broadcast below to quietly play the troubleshooting.

4. At this time, Kesen jujube is used to detect the pure frequency problem of Yin Qichun.

5. Finally, you can repair or update it through the driver tool. <>

Summary. First, check whether the sound card driver is installed normally, you can switch to "Hardware" under "Properties" under "My Computer", switch to "Hardware" to select the line, and then open the "Device Manager", and look at the + sign on the right side of "Sound, ** and Game Controller", and then see whether there is a question mark or exclamation mark in front of the first or second item, or the first item appears "Traditional**Capture Device" prompt. If there is one of the three situations, all of them are the relationship that the sound card driver is not installed normally, you can deal with it according to the following methods;

What should I do if my computer can't find the audio output device.

First, check whether the sound card driver is installed normally, you can switch to "Hardware" under "Properties" under "My Computer", switch to "Hardware" to select the line, and then open the "Device Manager", and look at the + sign on the right side of "Sound, ** and Game Controller", and then see whether there is a question mark or exclamation mark in front of the first or second item, or the first item appears "Traditional**Capture Device" prompt. If there is one of the three situations, all of them are the relationship that the sound card driver is not installed normally, you can deal with it according to the following methods;

If the sound card driver is installed or there is a problem with the installation, you can first ** a "driver wizard", and then open the program to automatically detect, after detection will help the sound card driver to upgrade, follow the steps step by step**.

The following describes how to handle the collapse of the computer display family and the absence of an audio device connected to it:

Tools Ingredients: Dell Optiplex 7050, Windows 10.

1. Open Windows Settings and click on the "System" option.

2. After entering the system, click on the "Sound" option on the left side.

3. Then click on the right side of the "Manage Sound Pure Spike Rental Equipment" option.

4. Find the speaker and click the "Enable" button to finish.

Summary. Dear, it shows that there is no audio equipment, and see if the cable of the speaker is plugged loosely.

Hello dear, first of all, on the computer desktop"Computers"icon right-click on 2Then, open it in the pop-up Catch Kai interface"Sound Ki Tong, ** and game controller Bo Zhi Tan",3.To update, just right-click on the sound device and select it in the pop-up box"4.

If it doesn't need to be updated, it's a problem with the settings. Use the right mouse button at the bottom right of the desktop.

No update is required.

Dear, it shows that there is no audio equipment, and see if the cable of the speaker is plugged loosely.

And take a look at the drive.

How to solve the problem of driving.

Use PC Manager to optimize it.

See if it alerts you to the problem with the audio driver.

There are no reminders. Dear, maybe your device is not compatible with the computer, you unplug it and try it.

The computer shows that there is no audio device connected to the solutionBrand Model: ASUS.

System version: UX30K723A.

1. First of all, move the mouse to the icon of "Little Speaker" on the desktop, and it will prompt "No speaker or headphones plugged in", and there is a small red cross on the small speaker, as shown in the figure.

2. Then we click on the "Control Panel" of the desktop.

3. Find and click on the "Set the Traces of Annihilation and Reserve Management" in the control panel.

<>7. Finally, you will find that the red cross on the small speaker in the lower right corner of the desktop has disappeared, indicating that the audio equipment and recognition have been successful.