What is the reason why I set up a wireless router and enter the incorrect account and password after

First use the computer to connect the router separately, after entering the negative setting, modify the address in the LAN port settings, save and restart, and then insert the cat's network cable into the WAN port of the router, and then use it to enter your own router to set up. If it is a wireless modem, then find the root network cable, connect it to your wireless router alone, and then enter to modify the LAN port IP. In fact, it is to modify your router IP to avoid conflicts with optical modems.

After the modification is completed, save and restart. Then connect the network cable from the optical modem to the WAN port of the router, and then enter the new address of the router to set it. Everything else is set up just like a normal router.

If there is no connection to the Internet, it is a problem with the settings, please use the following method:

After the Telecom Fiber Modem + Wireless Router cannot log in to the routing setting method.

1. First of all, change the wireless router IP: connect your computer with TP-wireless router separately, do not connect the optical modem, so that you can enter the TP settings page, change the router LAN port address in the network settings - LAN port settings to, save, DLINK router is written behind the router Yes, this is no conflict with the default telecom fiber optic modem, you don't need to modify the IP.

2. To the network connection, cancel the "broadband connection" as the default connection; Click Local Join, Right-click, Properties, Select: Automatically get IP address, DNS server, OK; In IE, enter :, account number:

admin password: admin Log in to the router to set up: click the setup wizard, enter the widenet account and password, and select the mode:

pppoe。Save to exit.

3. Connect the network cable connected by the optical modem to the WAN port of the router, and continue to set the wireless routing on the TP-Settings page.

4. Fiber Optics Cat Telecom has been set up, and it should not be changed if it can access the Internet;

Now the main thing is to set up a wireless router:

1. Basic settings of wireless network: 1. Turn on the wireless function; 2. Turn on SSID broadcasting. Wireless Network Security Settings:

Turn on the security settings and use the WPA-PSK WPA2-PSK AES encryption method. 1. Select: WPA-PSK WPA2-PSK; Type of Certification:

Automatic; Encryption algorithm: AES; Settings: psk password:

Add it yourself; 2. Network parameters: 1. WAN port setting: WAN port connection type: PPPoE; 2. Second connection: disabled; 3. Corresponding connection mode: automatic connection;

3. DHCP server: enabled; Save, restart. It should be possible to access the Internet on computers and wifi.

If you need to buy a machine, please log in to Anhui Telecom Tianyi store, iPhone, Samsung, Xiaomi and other hundreds of mobile phones at low prices on the whole network.

Hope mine can get yours.

If you can't log in after resetting your password and the network shows no internet, there could be a few possible reasons:

1.Resetting may result in a loss of configuration due to the handpin:After resetting the router password, the router's profile may be restored to factory settings, which means that the previous network settings may have been erased.

You may need to reconfigure your router's network settings, wireless network name (SSID), password, etc.

2.Wireless connection issues:If you're using a wireless connection, check that you're properly connected to your router's wireless network.

Make sure you're using the correct wireless password for the connection. You can try reconnecting or moving your device closer to the router to get a better signal.

3.Router Failure:After resetting your password, other issues may arise, such as issues with your router's hardware.

Try restarting your router and check if there are any error lights. If the problem persists, you can try restoring the router to its factory settings and reconfiguring the router as soon as possible.

4.Network Business Questions:Sometimes, your network provider may have a problem or need time to update its system after you change your router's password.

You can try to contact your network provider to find out if there are any issues or if there is anything they need to do to make the new password work.

If the above methods do not solve your problem, it is recommended to consult the technical support of your network provider or router manufacturer.

There are many reasons, it may be because the router is not connected, or it may be that the router is faulty.

If you set up a wireless router to surf the Internet, you can't enter the router settings interface in the browser, which may be caused by the following reasons:

1. The router is connected incorrectly;

2. The IP address of the computer is set incorrectly;

3. There is a problem with the network cable;

4. The input address is incorrect;

5. Router problems.

Check if the ping is normal.

When you can't enter, it is manifested that the input in IE cannot display the web page, it may be that there is a problem with the network connection, we can use ping to check it:

In general, there are several situations that can cause ping failures:

The router is not powered on. For example, the power adapter is not connected, the router switch is not turned on, etc. The router's indicator lights will light up when the power is on.

If there is a problem with the network cable connection between the computer and the router, such as the loss of the crystal header, the network cable breakage, the loss of the network card, etc., it will lead to the inability to connect, and of course, it will be impossible to log in. Change the network cable or access the router in another computer, and if it can be opened, there is a problem with the network cable or network card.

The firewall prohibits access to the router. Depending on how the firewall software is set, you can remove the ban.

The network settings are incorrect. For example, if the IP address, subnet mask, and gateway of the machine are set incorrectly, the router cannot be connected. For more information, please refer to the router manual or check the settings below.

What if the ping is fine, but the login can't be connected? At this point, it is necessary to see if the username and password entered are correct. Regardless of the mistake of any username or password, you will encounter the problem of not being able to get up.

It depends on what the route is.

If it's convenient, I send the model number.

I've seen passwords there.

Username: Password.

admin ： admin

admin ：

guest ： guest

guest ：

These four are more common.

If there is a change and forgetting.

You can press the reset button on the route and try to log in using the four passwords above.

If not, just look at the default password on the manual.

The reset button needs to be pressed and held until the device light is fully on, let go of the device and wait for a minute before you can log in with the username and password on the nameplate on the back of the device.

Generally, the initial password is admin and admin, which will be written on the router and manual. If you have changed your password and forgotten it, you can reset the router according to the instructions in the manual. The password will be restored to the original password.

Try using a username and password (username: teleadmin) that is widely circulated on the Internet Password: ne7ja%5m

This is not the login screen of the Tengda router!

It is the web login interface of China Telecom's optical modem.

Open the control panel - Network Connections, find the current network card, and see what the gateway address is in the details.

Open the browser and log in to the router using the address displayed by the gateway!

The default router username and password will be written at the bottom of the router. Generally, the default username and password are: admin

You need to link to the router, look at the IP address on the back, generally, the password for the first test, there are all on it. Go in and set a custom name.

Connect your computer to any LAN port of the router, enter the settings page, and change the WiFi name (SSID) and password of the router.

The method is as follows: 1. Open the browser and enter the IP address of the router gateway in the address bar (there is a label on the back of the router, generally, enter the login username and password (generally admin);

2. After successful login, the running status will be displayed, click "Wireless Settings";

3. Click "Wireless Security Settings" again, and the wireless network name (SSID) is a name, which can be filled in casually, generally letters + numbers;

4. Then set the password, generally choose the WPA-PSK WPA2-PSK encryption method (the password should be 8-16, and the alphanumeric combination can be used);

5. After setting the password, click Save to prompt restart;

6. Click "Restart Router" in "System Tools" to restart the router.

admin password admin

or 123456

If it doesn't work, reset it and enter it.

Change your password. Wireless setup.

Unlimited security settings.