What s going on with the computer screen turned on all white

Ctrl+Shift+ESC to see if you can pop up the task manager, if you can, select the first one from the menu above"files"- New task - Enter explorer

Can. Then, it should be some malicious plug-ins, use a tool like 360safe to clean it up, and finally use the optimizer or Super Rabbit to clean up the registry, OK.

You open the task manager (open method: ctrl+alt+del) and see if there is anything in the process.

If not, then you click on the file in the upper left, and then there is a new task, and the process is added to it.!If there is, just end it and build a new one, which should solve the problem.

Probably poisoned.

That's all I need for now.

Hehe. When entering the system, Ann F8 enters safe mode and kills it with antivirus software.

There are two ways to do this.

Law. 1. Right-click on My Computer.

Attribute. Senior.

Click on the "Settings" button under "Performance", on the "Visuals" tab, select "Custom", and then tick the box in front of the "Use shadows for icon labels on desktop" option among the many options below.

Are you sure. Law. Second, for those made by acktive

desktop

The problems may be solved by:

Right-click on the desktop.

Attribute. Desktop.

Customize your desktop.

The web will add the "Current Home Page" in the "Web Page" column as well as the "http ...Wait for all the checks in front of each item to be removed ("http......In order to add web pages or ** addresses from the Internet, you generally don't need them, you can delete them all), and remove the tick in front of the "lock desktop item" below, and click OK.

The reasons and solutions for the computer screen to turn on all white are as follows:

Reason: 1. There is a problem with the self-test of the memory or motherboard, which causes the machine to fail to start smoothly, and the internal files must be loaded when the computer starts, and if there is a problem with the self-check, these files cannot be loaded.

2. If the capacitor of the motherboard is bulging or bursting, if it is bulging, it means that there is a problem with the motherboard, so that the motherboard itself cannot load the internal files, and the white state appears.

3. Motherboard battery.

It's dead, and there's a thumb-sized coin cell battery in the motherboard.

This battery is dead and will make the motherboard lack the ability to save resources, load files, and also cause the screen to be white.

4. If there is a problem with the display, the display voltage is insufficient or too high, and the display itself will also have problems.

Solution: 1. If the problem still exists from booting to entering the system or even directly opening the display, it may be that there is a problem with the **wire or **interface, or there is a problem with the display, in this case, it is recommended to send it for repair.

2. If it appears after entering the system, it may be that there is a problem with the driver of the graphics card, you can try to reinstall the driver of the graphics card.

3. If the driver problem of the graphics card is still not solved after reinstalling it, it may be that there is a problem with the graphics card and you need to replace the graphics card to solve the problem.

If the screen is all white, then it should be white in this case. It is recommended that the landlord restart the computer to try, if it still does not work after restarting, you can replace the monitor. Troubleshoot if the monitor is malfunctioning?

If there is a malfunction of the white screen like the display. Generally, it is a problem with the display driver board, and it is enough to replace this motherboard.

1. The fault of the computer white screen may be caused by the driving circuit of the computer panel, the power supply circuit of the computer panel, the poor contact of the screen wire, the control circuit of the motherboard, etc. Because the computer has a white screen after booting, it means that the backlight and high-voltage generation circuit are working normally, but the computer panel does not get the driving signal. If the screen disappears after the computer is shut down, and then the screen goes white again, it may be caused by a problem with the power strip.

Poor or faulty graphics card contact will cause a white screen on the computer, just check the graphics card or replace it with a new one.

If the computer screen is turned on completely white, it is because there is a problem with the monitor, at this time. Just restart your computer.

It may be that the inner screen of the host is broken, you can try to take it to a repair shop to repair it.

There can be a variety of reasons why your computer screen is white, here are some of the possible causes and how to fix them:

1.Brightness setting too high: If the screen brightness is set too high, it may cause the screen to go white. You can try lowering the screen brightness to fix the problem. Envy.

2.Display failure: If the screen is white and cannot be resolved by adjusting the brightness, it may be a display failure. You can try connecting another monitor to see if the problem is with the monitor.

3.Graphics card failure: A graphics card failure can also cause the screen to go white. You can try updating your graphics card driver or replacing your graphics card to fix the problem.

4.Overheating: Overheating your computer can also cause your screen to go white. Try cleaning up the inside of your computer to make sure it's getting enough ventilation.

If none of the above methods can solve the problem, it is recommended to contact a professional computer repairer for inspection and repair.

Reason: 1. There is a problem with the self-test of the memory or motherboard, which causes the machine to fail to start smoothly, and the internal files must be loaded when the computer starts, and if the self-check is faulty, these files cannot be loaded.

2. If the capacitor of the motherboard is bulging or bursting, if the bulging bag means that there is a problem with the motherboard, so that the motherboard itself cannot load the internal files, and the white state file search appears.

3. The motherboard battery is dead, and there is a thumb-sized leaky button battery in the motherboard, which will make the motherboard lack the ability to save resources and load files, and it will also cause the screen to be white.

Enter the stupid file into the control panel page, and then click on the color management in the control panel, and make certain settings on the page to solve the problem.

1.Click to open the start menu, select the [Control Panel] option, and click the base file to open it.

2.In the Control Panel page, find [Color Management] and click to open it.

3.In the color management page, click the Advanced tab, and then click Calibrate Display.

4.On the pop-up page, follow the prompts and click Next.

5.In general, the computer whitening is due to the gamma value being too high, so click [Gamma is just right] on this page and click Next.

6.Then select [Contrast] on the pop-up page, and then click Next.

7.Then click on the page and select [Brightness is just right].

8.At this time, there are two options on the page [Previous Calibration] and [Current Calibration], if you feel that the adjusted screen effect is better, choose [Current Calibration], if there is no good effect before, choose [Previous Calibration], and operate according to your needs. Fighting.

Workaround for display whitening:1. Use the keyboard's shortcut keys to adjust the following brightness to try, you can press and hold the fn key on the keyboard and the brightness reduction key to adjust, and adjust the brightness to the appropriate one.

2. If the adjustment effect is not obvious on the keyboard, it can be used on the monitor. Adjust the desktop color settings inside.

Right-click on your desktop and select the graphics card control panel and open it.

Instructions for attaching whitening to the monitor:Choose to adjust the desktop color settings, adjust the brightness, contrast, and grayscale of the monitor until you feel the right fit, and then save and exit.

1. The opening and closing angle of the screen is between 115° and 170°.

2. Set it in the integrated graphics card. (Right-click on the desktop to select the graphic properties and select Color Enhancement) 3. Save and confirm after setting.