How to turn on mobile hotspot in win10 when the network is disconnected?

Hello, select "Network & Internet" in Windows Settings

2.Select the mobile hotspot and tap On. If this step says "Unable to set up mobile hotspot, turn on Wi-Fi" Workaround: Right-click on Computer - Management - Device Manager.

Then click on View in the menu bar - Show hidden devices, and then click on Network Adapters.

Below find the Managed Network Virtual Adapter, my name.

Yes Microsoft Wi-Fi Direct Virtual Adapter 2, right-click to boot the adapter.

3.Select the Change Adapter option, and then I see that there is an extra local connection*12 in the network connection, this is the mobile hotspot, and then my computer is through an Ethernet.

3 Connected wired networks.

4.Right-click Ethernet 3, select Properties, in the sharing, as shown in the figure below, check Allow other network users to connect through the Internet connection of this computer, and then select the network connection just created by the home network connection, click OK.

Summary. The hotspot cannot be turned on, which is usually a problem with the channel width setting, and the user can restore it by simply changing the setting. The steps are as follows.

1. The mobile hotspot cannot be turned on, as shown in the figure below.

What should I do if win10 can't turn on the mobile hotspot.

The hotspot cannot be turned on, which is usually a problem with the channel width setting, and the user can restore it by simply changing the setting. The steps are as follows. 1. The mobile hotspot cannot be turned on, as shown in the figure below.

I made a mistake, sorry.

2. Right-click [My Computer] on the Windows 10 desktop, and then click [Properties], as shown in the figure below.

3. Click [Device Manager] directly in the left navigation of the open win10 system window, as shown in the figure below.

4. After opening the Win10 Device Manager dialog box, directly find the [Network Adapter] and put it, as shown in the figure below.

5. Double-click the driver of the wireless hotspot in the network adapter to open the wireless hotspot, as shown in the figure below.

6. After opening the Wireless Hotspot Driver Properties dialog box, click the [Advanced] tab directly.

7. In the Advanced tab, set the values of the two options of 802 11n to 20MHz, and then click OK directly.

8. After setting, turn on the wireless hotspot again to recover.

Win10 comes with the mobile hotspot can not be opened, the recovery steps are as above, just follow the above steps.

Any more questions, I'm in oh <>

Here's how to fix it:Operating Equipment: Dell Computer.

Operating system: win10

Procedure: Setup function.

1. First turn on our computer, and then click Start; See diagram below.

2. In the pop-up interface, we click Settings; See diagram below.

3. In the pop-up interface, we click on Network and Internet; See diagram below.

4. Then we will slide the switch of moving the hotspot to the right; See diagram below.

Enter [cmd] in the search bar, enter the command prompt, and enter [netsh wlan show drivers] to check whether the bearer network is supported. <>

If "Yes" is displayed, it means that WiFi hotspots are supported, and if "No" is displayed, it means that the current model or this version of the wireless network card driver is not supported, you can change the wireless network card driver version to try it.

win10How to share the network to the mobile phone,Of course, it is to create a hotspot。 However, wifi hotspots can now also be implemented through third-party software, but you can install less software on the computer, so install a little less! The features are all pretty much the same. 1

Right-click on that icon in the Start menu, then click on the Command Prompt (Admin).

2. In the pop-up command prompt, enter: netsh wlan set hostednetwork mode=allow ssid=jingyan key=jingyan147258

Enter to explain:

The SSID is the name of the wireless hotspot display.

The key is, of course, the password of the wireless hotspot.

3. Then enter system32>netsh wlan start hostednetwork in the order prompt.

That's probably it, go and verify it!

end1: Right-click on the network on the desktop and click Change adapter settings in the window that comes out.

2. Right-click on the WLAN and then click Properties.

3. After entering the WLAN properties interface, click on the sharing option and check Allow other network users to connect through the Internet connection of this computer. Then under Home Network Connections, select Tron Hotspot Virtual NIC.

The name of the virtual hotspot network adapter is generally Microsoft-managed network adapter.

end1: Enter the adapter settings interface to see if there are more network connections as shown in the figure below.

2. Then search on your phone to see if there is the Jingyan wifi network name that you just set. Enter your password to connect and you will be able to use the network on your computer.

Device Manager, network adapter, disable Wi-Fi and enable it instead.

It's best to right-click on the surface to detect hardware changes first. Refresh the list below.

Win10 system can not connect to the mobile phone hotspot network, just turn on this service, hurry up and tell everyone.

Disable and then enable it to have a try. Have a great day!

1. Win+R opens the run dialog box, and then enters"cmd"(Or you can find cmd in the search and run it as an administrator) to open the command prompt window;

2. Enter at the command prompt cursor: netsh wlan set hostednetwork mode=allow ssid=name key=00000000 Enter where SSID= is the network name that needs to be set, and key= is followed by 8 63-bit wireless network password.

3. Continue to enter "netsh wlan start hostednetwork" and make sure that when the "bearer network started" prompt appears, the wireless sharing will be created.

Win10 system when connecting to the mobile hotspot,The following figure appears in red,Solution:

Right-click on "My Computer" and select "Device Management".

Go to the page, select Network Adapters, and turn on the NIC.

A window appears, select the "Advanced" option.

Select "long and short" for the value with the number "802", and click OK.

Win10 mobile hotspot often shuts down automatically as a solution:

1.Open Device Manager and device wireless card properties: Right-click on This PC, select Manage from the pop-up menu, and then select from the pop-up menu

Device Manager - Network Adapter, right-click on the device name of your computer's wireless network card (different wireless network card names are different), select properties, and finally select in the pop-up property box: power management, and then remove the "Allow the computer to turn off this device to save power", and click OK.

<>2.Open the mobile hotspot function that comes with the win10 system: click the left mouse button on the status bar in the lower right corner of the computer, and click the network connection icon in the pop-up menu.

Click "Mobile Hotspot" in the pop-up menu, and select "On" under the switch button under Share My Internet with other devices

<>3.Set the properties of the virtual NIC after performing the previous step, do not close the menu just now, directly select "Ethernet", click "Change adapter options" in the pop-up menu, select the virtual NIC (with a logo similar to Microsoft Wi-Fi Direct Virtual), right-click the menu to select properties, click the menu that pops up "Configure", click "Power Management", and remove the tick of "Allow the computer to turn off this device to save power". Click OK.

<>4.Set your computer's power options: Go to your computer's "Power & Sleep" option and change the sleep policy to from or Mega Sell No.

1.Boot into the system. Right-click the starting position and select the Settings option.

2.Select Network & Internet

3.Click [Mobile Hotspot], and click the option on the right to turn on the mobile hotspot function.

4.After selecting the network connection you want to share, you can press [] to change the network name and password frequency band you want to share.

5.The name of the network to be shared by the closed wheel password frequency bandThe name of the network to be shared by the password frequency band.

6.After the date is completed, you can see the device that is connecting to this mobile hotspot on the function page.

Here's how to fix it:Operating Equipment: Dell laptops.

Operating system: win10

Program: Refers to the beam setting function.

1. First turn on Weisun Yun's computer, and then click Start; See diagram below.

2. In the pop-up interface, we click Settings; See diagram below.

3. In the pop-up interface, we click on Network and Internet; See the diagram below.

4. Then we will slide the switch of moving the hotspot to the right; See diagram below.

Press Windows+i to open the computer settings, click on the Network & Internet options on the window.

Go to the page and click on the Shifting Sweet Potato Hotspot option on the left.

On the right side of the page, click the switch to turn on the mobile hotspot.

Hello dear, the following is the solution to win10 mobile fiber hunger hotspot can not be set: 1, press the win + s key combination, you can quickly open windows search, search for the control panel in the search box, and then click and open the control panel application 2, control panel window, category view mode, click to adjust the computer settings under the network and internet3, network vertical cluster and internet window, click network and sharing center 4, network and sharing center window, On the left, click Change Adapter Settings, or under View Active Network, click Ethernet5, Network Connection Window, Adapter Settings, double-click to open the connected network6, Ethernet Status window, click Properties below7, click the Share tab next to the Network tab to open8, in the Home Network connection, select Local Connection, and check Allow other network users to control or disable shared Internet Vertical Return9, and then return to the mobile hotspot location, and find that it is ready to use.