How to cast your phone to your computer, how to cast your phone to your computer

There are several ways to cast the screen of the mobile phone to the computer:

1. Use the projection function of the mobile phone, which is available in both Android and Apple mobile phone systems;

2. Use the wireless screen projection function of the laptop windows10 system (the mobile phone and the laptop are connected to the same network);

3. Use a data adapter cable (such as TYPC to HDMI) to connect the mobile phone and computer to achieve screen projection;

4. With the help of AirDroid Cast, wireless projection is realized.

1. Before turning on the mutual projection of mobile phones and computers, several practical conditions must be met.

1. There must be a wireless network. The mobile phone and the win7 computer are used under the same wireless network (in the same local area network).

2. After the above conditions are met, let's move on to the next step. Enter the Start Menu - Enter Windows Services (Microsoft Management Console).

The display is 22 inches and 27 inches, and it is on Tmall Electric City, with a complete range of categories and a choice of quality! Ad.

3. After entering the service, find the SSDP Discovery right-click attribute set to Start (Automatic).

Fourth, next, Windows MediaPlayer Network Sharing Service

Again, the right-click property is set to Start (Automatic).

Star projector - Alibaba, complete variety, low **, high profit. Ad.

5. Set up the network

In Control Panel - Network & Internet & Networking & Sharing Center, set your current computer's wireless network type to Home Network.

Holographic air projection chooses Dongchao Technology, new technology, new display. Ad.

6. Click on the home network and turn on the ** stream function.

See 1 image remaining.

8. Click: Allow remote control of my device and Automatically allow the device to be me. And keep Windows Media Player not closing, select Allow in the More Streaming options.

9. After doing these cloths.

Let's open the main interface of the mobile phone again, pull it up and down, and find the wireless screen projection. This is shown in the figure below.

10. Successfully found that there is already a new equipment.

The following operations require the mobile phone and smart TV to be in the same wireless network environment.

How to cast a TV on an Android phone:

The projection method of Android mobile phones is similar, and the following takes oppo mobile phones as an example. First, go to the settings page of your phone, find the option "Other wireless connections" in the settings page, click and enter the detailed page of the option. Find the "Phone Mirroring" option and click to enter.

Turn on the "mobile phone screen casting" switch, and tap the TV you want to cast the screen on. The phone will automatically cast the content of the phone to the TV.

How to cast the screen of the TV on the iPhone phone:

Take iOS 13 as an example, open the main page of the Apple phone. Swipe up on the screen and tap "Screen Mirroring". Click on the name of the TV to cast the content to the TV.

Common method for Android and iPhone:

Many**software has a screen projection function,Generally integrated in**device interface,Open any film and television drama,Directly click**Small TV or screen projection button in the screen,Click to select the TV at home,The content will be projected to the TV。

Casting the screen from the mobile phone to the computer can be achieved by using the AirDroid Cast projection software.

Screen projection steps: software.

3. The projection is successful.

AirDroid Cast supports 5 mobile devices (including Android and iOS devices) to the computer at the same time, just scan the same *** on each mobile device (or enter the same connection code), and follow the above steps to complete the screen mirroring.

All features are free to use on a LAN (your computer and Android device are connected to the same network) and you don't need to sign in.

If you want to cast the screen (cloud projection) in remote mode (the computer and mobile phone are not connected to the same network, no matter how far away), you need a member account.

If you are using a Huawei phone.

I want to collaborate with a notebook on multiple screens.

There are four ways to connect:

1. Touch.

1. Turn on the NFC function on the phone and touch the HUAWEI Share tag (or Magic-Link tag) on the back of the phone (near the rear lens) to the HUAWEI SHARE tag (or Magic-Link tag) on the laptop (notebooks without NFC tags can be picked up for free at an officially authorized Huawei store).

2. Some notebook NFC has an antenna built into the touchpad, and there is no NFC tag on the computer, so the connection can be triggered by touching the mobile phone to the notebook trackpad.

3. When the connection between the mobile phone and the laptop is established for the first time, the mobile phone has a user privacy statement, and you need to agree to the user license agreement; If you are not connected for the first time, you only need to confirm it on the PC.

2. Sweep it.

Open PC Manager.

My Phone》Connect Now, select Scan Code to Connect or tap the upper left corner to switch to the Scan Code Connect page, and open the Huawei browser on your phone.

3. Proximity to the connection.

Turn on WLAN and Bluetooth on the mobile phone, and at the same time open the Computer Manager "My Phone" on the computer to connect immediately, and then directly close to the keyboard and follow the mobile phone prompts to connect successfully.

Fourth, wired connection.

1. This method is only supported in versions and above.

2. The PC Manager version needs to be updated to and above;

3. If you use a docking station.

When connecting the adapter to the data cable and the PC, make sure that the connection port on the computer side is not only the charging port, otherwise it will not be supported.

Connect the Huawei phone and Huawei PC with a wired connection or data cable, and the phone will be unlocked and the screen is on, and the connection will be successful by following the prompts on the phone.

The steps to use the projection on the screen of your phone are as follows:

1. Tool preparation:

a. A smartphone that supports "Project My Screen" (the following takes Nokia Lumia 620 as an example).

b. Program "Project MyScreen.

c. Install a computer with an operating system of Windows 7.

Second, the specific operation:

1. Connect your mobile phone to a computer.

2. Install the program "Project MyScreen. The file is only a few hundred kb, the file size is small, and the installation is very simple, all the way "next" can be installed.

3. Double-click the "Project MyScreen App" on the desktop, if the phone has been connected to the computer at this time, the phone will prompt whether to allow "Project My Screen", and the computer screen will display the phone and the phone screen screen in full screen after confirmation. At this time, the operation on the mobile phone will be displayed on the computer screen at the same time.

4. Press the ESC key to exit the full-screen display state of "Project MyScreen App" and enter the window display state. Click "File"-"Exit" in the menu bar to exit the program and end the projection screen of your phone.

Teach you how to cast your phone to your computer, which is very simple.

How do I cast my phone to my computer? As a mobile device that is inseparable from our lives, mobile phones have brought a lot of convenience to our lives and also met many of our entertainment needs. However, sometimes the mobile phone screen is too small, and it cannot provide a very in-depth immersive experience when a**video and audio, sharing games**, at this time, if the screen of the mobile phone can be projected onto a large-screen device such as a computer, it will bring a more shocking effect.

Here, we will teach you how to project the screen of your mobile phone to your computer.

Tool raw materials smartphone win10 system with the same LAN.

Method: Read step by step.

Turn on the Android phone to connect to the wireless network, turn on the computer and connect to the network, note that the two devices must be connected to the same local area network.

Turn on the computer, the menu key enters the settings interface, enter the display settings, find the projection to this computer, select all locations are available, press OK and remember the name of the computer.

Click on the name of the computer, the mobile phone starts infinite projection, you can see the movie display the information of the mobile phone, wait for a moment to complete the projection.

After the projection is successful, you can see that the screen of the mobile phone has been projected onto the computer screen in real time, but because the mobile phone is displayed vertically, the screen of the computer cannot be fully full, so you can set the mobile phone to a horizontal screen display.

Precautions. Must be on the same LAN.

There is a slight delay in the real-time projection.

This tutorial is limited to Win10 system only.

Report feedback.

1.Enter the projection tool Enter the projection tool on your phone and computer.

3.Tap on the device Click on the device that has been scanned.

4.Click Allow Connection On your computer, tap Allow Connection.

Nowadays, mobile phones are becoming more and more convenient to use, and sometimes it is necessary to project the display interface of the computer to the mobile phone in the process of use. It's easy to view, so how do you do it?

Method steps.

Please click Enter a description.

After installing on the computer, we open the software configuration. Match according to your own mobile phone system. Don't choose the wrong one.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Here we see two options, the first is to put the phone on the computer, and the second is to put the computer on the phone.

Please click Enter a description.

Of course, we chose the second one, because we were going to put things from the computer on the phone.

Please click Enter a description.