How do three routers come together in series?

It's okay to even have as many as you want, but there may be a TTL timeout. The setting can be very simple, the LAN port at both ends of the network cable is in the same network segment as the WAN port, and the default gateway of the router can point to the LAN port IP of the previous router.

Two routers can be connected in series.

The steps of the method are as follows:

1.If it is a router that has been used before, before setting it, we reset it first, find the reset button on the router, and after 6 seconds, the router will automatically restart, and the reset is completed.

2.Next, we connect the router, connect the network cable from the upper-level router to the WAN port of the new router, and then connect a network cable from the LAN port of the new router to the network card of the computer.

3.After logging in to the router, click on the "Wireless Settings Wireless Security Settings" menu in turn to find the basic wireless network settings, fill in the SSID number here, and choose to turn on the wireless function and turn on the SSID broadcast.

4.Then open the security setting interface of the wireless network, set the encryption method here, and then set the wireless access password and save it.

5.Then you need to open the LAN port setting interface of the router, set the LAN port address here that is different from the previous level of router, and finally click Save.

6.Finally, you need to see if the DHCP service of the router is turned on, in order to facilitate the normal Internet access of different terminals, you need to turn on the DHCP service of the router, after all the settings are completed, restart the router, and you can access the Internet normally.

This is possible, it belongs to the router cascade mode.

The router cascade settings are as follows:

1.First, connect the computer to the LAN port of the slave router, and change the IP address of the slave router to a different network segment address, as long as it is not in the same network segment as the main router. For example, most router addresses are, and we just need to change from router addresses to them

2.Then turn off the DHCP function from the router in the settings

3.Finally, connect the network cable from the main router to the LAN port of the slave router (any one is fine), note that it cannot be the WAN port.

OK. If multiple people use the same network account, first connect one router to broadband dial-up, and use network cable to connect the switch and the other router to the LAN port of the first router.

If there is only one network interface, you can connect the switch to broadband first, and connect the two routers to the switch separately, so that the two routers can use different broadband accounts.

In addition, if the router is directly connected to the LAN port with a network cable, it can be used as a switch, and if the network port is not enough, one of the routers can be used as a switch, which is more suitable for use in the case of a large number of people. It should be noted that if you only have a broadband account and the speed is not very fast, the speed will be terrible when there are many people.

How to use two routers in series:

1. Router A is set up normally.

2. Router B setting method:

First of all, the WAN port should be vacated, and all the wiring should be connected to the LAN port.

Disable the DHCP service for Route B.

Change the IP address of the LAN port of Route B (not the same as the CIDR block of Router A) to IP address.

Yes, two VLANs can be drawn on the switchOne VLAN goes one router.

Yes, do not plug the standby routing WAN port into the cable, and plug it directly into the LAN port.

Hello can be used in series.

You can follow either of these two settings, and the first way is done.

Use the wireless router as a wireless switch, turn off the DHCP function of the router, set the wireless password in the wireless management-security management, and finally plug the first router cable into the LAN port of the wireless router, save and restart the router, and that's it.

The second way.

Plug the network cable from the first router into the WAN port of the wireless router, use dynamic IP in Internet mode, and change your router address, such as the original to the router, and change it to the DHCP server address pool allocation range, the wireless router is set under the wireless password, save and restart the router.

If you have any questions, please ask me.

Specific problems, specific analysis.

If you control both routers, or you can't control both routers, but the incoming line is an automatic IP Internet access, you can press WXY880326 or AIXIANGSUI2000 to handle it.

If the first router is not under your control, and the network cable that comes in is a fixed IP, it is terrible that the above two methods will not work.

If so, plug the incoming network cable into the WAN port of the second router and connect the computer to the LAN port of the router. Then enter the route settings, modify the default gateway of the second route, so that it is different from the gateway of the first router (that is, the gateway in the parameters assigned to you), and then follow the setup wizard to set up automatic dialing, when choosing the Internet mode, select the static IP, and then fill in the original set of parameters assigned to you, continue to complete the settings, save the settings, and restart the route.

The local connection IP of the computer can be set to be obtained automatically, or it can be set manually, and the parameters should match the parameters of the second path in the manual setting.

1. Prepare 2 network cables, one end of the network cable is connected to any LAN (1 2 3 4) interface on the first router, and the other end of the network cable is connected to the WAN interface of the second router; Connect one end of the network cable to any LAN (1 2 3 4) on the second router, and connect the other end to the computer.

2. Enter and press the Enter button in the browser - > enter the login username and password to log in, and enter the settings interface of the second router.

3. Click "Network Parameters" - WAN Port Settings "- WAN Port Connection Type" and select: dynamic IP (called "Auto Acquisition" and "DHCP" on some routers) - click "Save".

1. Connection method.

The LAN port of Router1 is connected to the LAN port of Router2 (applicable to all computers that require the IP addresses of all computers to be in the same network segment), as shown in the following figure

2. LAN connection settings.

The specific steps are as follows:

1. Turn on the power supply of Router2 and find a network cable to connect from the computer to any LAN port of Router2;

2. Open the browser on the computer, enter in the address bar, and enter the router login interface after entering;

3. Enter the default username and password guest in the login box, enter the management page of the router, click on the intranet configuration and select the DHCP server, select the DHCP service and save it to take effect.

4. Click "Network Parameters", select "LAN Port Settings", and change the default IP address to the same network segment as Router1 but different from Router1 (for example, if the IP address of Router1 is, change Router2 to and click "Save and Restart").

5. After Router2 restarts, find a network cable from any LAN port of Router1 to any LAN port of Router2. After the wiring is completed, check whether the computer can access the Internet, and if it can access the Internet, the configuration is completed. If you can't access the Internet, check again whether the settings are incorrect.

It is a great honor to answer for you, thank you for your support, and hope to solve the problem of wireless bridging for you. The Huawei WS5200 router can press the HI light of the primary router until it flashes from green to solid green. 2.

Wired bridging. After the primary router is set, connect the LAN port with a network cable to the WAN port of the secondary router to complete the connection.