The specific steps and processes of wall painting and stucco

1. Try not to mix water during the construction of medium and dark latex paint, otherwise it is easy to have color difference 2. Bandages should be applied to the joints of gypsum board.

3. It is better to put a cool cloth on the place where there is a gap in the wall

4. It is best to remove the putty on the original wall, or brush it with glue to seal it 5. Try to buy well-known brands, and try not to use the unfamous ones recommended by the decoration company or the foreman 6. The weather is too humid, and the paint should not be brushed.

7. The grinding of paint and coating should be carried out after it is completely dry.

8. The construction of the next paint must wait for the previous paint to dry thoroughly 9. The paint on the metal surface should be treated with anti-rust.

10. If the weather is too cold, the quality of paint construction will be poor.

11. When painting the door, use masking paper to stick the hinges and door locks.

12. If the weather is too hot, pay attention to ventilation.

13. When pasting wallpaper, paint the wall with clear oil.

14. When pasting wallpaper, the panel of the switch and socket should be removed 15, the bright and mercerized latex paint should be completed at one time, and the color difference is easy to appear 16, and the baseboard should be used to make up the seam with putty and latex paint after installation17, and the frosted glass should be protected with newspaper.

Technical points of painting the wall yourself:

1. If you originally brushed lime or paint, and now you want to paint latex paint, you must first remove the original wall and scrape the putty again.

2. If you want to paint a colored room, you can directly buy latex paint with color, if you redeem it yourself, you must redeem it at one time, otherwise there is a color difference, of course, the gradual color difference is also a decorative effect,-- if you like it.

3. The quality of the roller brush must be good, the hair quality is moderate, and the density is uniform, which affects the painting effect 4. Brush the ceiling first, and then brush the wall.

5. Be sure to brush the next time after the first dry time (hehe, I have a lesson, I will brush it when it is still wet, and bring the wall belt down).

6. Uniform force.

7. Brush the light color 2 times, if you want a strong color, brush it 3 times to be even.

...I was passing by. I was passing by. I was passing by. I was passing by.

There are many methods of wall decoration, including tiles, wallpaper, diatom mud, latex paint, etc., among which latex paint is what we call paint, which is more selective and affordable, so it is more popular, so what are the processes of wall painting? Let's take a look.

1. What are the processes of wall painting?

1. Grassroots treatment, keep it flat and clean; 2. Anti-crack treatment, kraft paper, mesh fiber cloth and other materials can be used; 3. Scrape putty, install a certain ratio of on-site deployment, stand for 10-20 minutes, stir evenly, and then scrape and coat; 4. Sandpaper grinding putty, after it dries, it should be polished from all sides to the center, and attention should be paid to grinding the edges; 5. Brush the primer, brush evenly, and ensure that it is brushed to ensure that the effect can be guaranteed; 6. Brush the topcoat, polish it with sandpaper after the primer is dry, and then paint the topcoat.

Second, what should be paid attention to after the acceptance of wall paint construction.

1. Pay attention to the appearance of the wall.

The first step in the acceptance of wall paint after construction is to look at the appearance of the wall, the uniformity of its color, whether there is color difference, cracking, powder loss, bottom penetration, missing brush, etc.

2. Pay attention to the flatness of the wall.

Acceptance also needs to pay attention to the flatness of the wall, to ensure that the wall is flat, you can use a multi-functional internal and external right-angle detection ruler to measure the deviation of the inside and outside right-angle, the deviation value is less than 4mm is normal, you can also use the vertical detection ruler to measure the verticality of the wall, and the deviation value can not exceed 5mm.

3. Pay attention to the smoothness of the wall.

The wall is not as smooth as possible, if it is constructed by spraying, the smoother the wall, the better, but if it is constructed by roller coating, the wall will definitely leave a cylinder print, at this time the wall is particularly smooth is not necessarily good, it is very likely to be caused by too much water during the paint deployment, which will reduce the adhesion of the coating.

Summary: The above is an introduction to the process of wall painting, I hope the content shared can give you some reference, if you want to know more about related knowledge, you can **** Qijia information.

After a long time after the renovation of the house wall, there will be a lot of problems, so people will fill the wall. Many people don't know that it is caused by some lack of attention when painting, thenSteps to paint the wallsWhat are they?

1. Cleaning of old walls.

Remove the wall from the floating ash, and then remove the surface. If there are oil stains and stains, you have to remove the coating yourself.

2. Scrape putty powder.

Steps to paint the wallsAfter a good process picks up the wall quietly yard putty powder, it is best to choose putty when choosing putty, putty putty is high and hard.

3. Polishing. The next step is to polish the walls with finer sandpaper to reduce damage to the walls. If the putty used is smooth, use 400-500 sandpaper.

If the quality of the putty used is not good, you should be able to use 360-400 sandpaper. Also, remember that when you polish the walls, don't use excessive force to prevent them from scratching the walls.

4. Primer. Lacquer is the basis of topcoat. While applying this tutorial,Steps to paint the wallsYou should wipe all parts of the wall evenly as well as the brush.

When the wall area is relatively large, apply a small amount of water appropriately and wipe the primer evenly on the wall to clean the primer.

5. Search. Steps to paint the wallsThere are some pits and a small bump, so apply paint, because it is clearly visible only this, so you need to make sure that the whole wall is flat, you can avoid the amount of water adhering to the wall, you have to check the flatness of the wall.

6. Topcoat. The top coat is actually a brush topcoat. It is best to choose a high-quality wool brush or roller as a brush head tool, and you should choose a high-quality topcoat.

7. Maintenance. Steps to paint the wallsUnder normal circumstances, it takes four hours to dry, only four hours after the surface of the latex paint is built, just this time you have to wait until it is completely latex paint latex paint is completely dry without completely drying. in the treatment of the walls.

8. Acceptance work.

Once the walls are cleaned, you can accept them. For example, look at holes or walls without cracks.

You can get it for free

1. Underlying processing:

This is the first step in the home improvement wall painting process. Let's first clean the peeled or loose local wall, and then repair it with cement mortar. Together, the local cracks should also be pasted with white latex in time.

Bottom treatment is the first step in paint construction, and more care should be taken when dealing with the bottom layer.

2. Wall leveling:

Before leveling the wall, we need to brush a layer of interface agent to enhance the adhesion. The most common method of wall leveling is to paint plaster. Let's keep in mind that the flatness error of the wall should be controlled within 3mm, and if there is a mistake, the decorative effect is not good.

3. Batch putty and grinding:

This is a very important step in the home improvement wall painting process. The process of batching putty should be repeated three times, the top needs to be thicker, and the last two times it will be thinner. When batching putty, we should choose one with a firm texture and relatively fine particles, so that the wall will be flat and lubricated.

After that, we have to use sandpaper to polish, sandpaper should be relatively fine, and the uneven difference should not exceed 3mm.

4. Brush the primer:

This step of the home improvement wall painting process is to pay attention to the uniform painting, you can add a little more water.

5. Repair: After brushing the primer, we may find that the wall is flawed, at this time, we must do the repair, remember not to have color difference.

6. Brush the top coat:

This is the final step of the home improvement wall painting process, and it is generally enough to brush it twice. It is necessary to pay attention to whether the local area has done a good job of painting collection and wall corners.

When we are doing house decoration, from the selection of decoration companies to wall materials to furniture, flooring, kitchenware, and bathrooms, every link must not be sloppy. Take the paint industry as an example, with the emergence of new technologies and new products, the competition in the industry is gradually intensifying, and the tricks of some unscrupulous businesses are also advancing by leaps and bounds. In the face of the dazzling array of decoration coatings on the market, the owners are cautious and compared.

So in the choice of decoration coatings, what should owners pay attention to? It is recommended that when buying paint, the following aspects should be considered:

First of all, you should consider paints with high brand awareness and high advertising investment. This kind of coating attaches more importance to word of mouth, has a certain quality guarantee, and consumers are more assured to use, such as: Dulux, Nippon, etc.

When purchasing coatings, you must make preparations, not sloppy at all, to see if the quality is passable, whether it is expired.

Secondly, it should be important to understand the strength of the coating company. For example, AkzoNobel, the world's largest paint industry, successfully acquired the British Imperial Chemical Industries Company (one of the top three paint companies in the world) in 2007 and acquired the Dulux brand, and its dominance in the paint industry is solid. Founded in Belgium in 1831, Laiwei Paint is known as the royal paint, and is now a top brand in European marketing for a hundred years, integrating exquisite European craftsmanship and the environmental protection concept of "creating an environmentally friendly space and caring for a healthy life", establishing a unique high-end brand image in the market and being known as a paint brand with excellent quality.

Again, try to buy paint in specialty stores or large stores, and pay attention to distinguish the good from the bad packaging; Pay attention to whether the paint meets environmental standards; Don't buy counterfeit or low-quality paint for cheapness.

Finally, don't forget to look at the shelf life of the product and try to choose a paint that is longer than the expiration date.

Editor's note: Although the owners will actively collect decoration knowledge through the network and information before decoration, due to the fact that the decoration paint market is difficult to distinguish between true and false, and the fish and dragons are mixed, so when choosing decoration coatings, the owners must choose carefully, keep a clear mind, and comprehensively investigate from the aspects of brand awareness, company strength, environmental protection, quality, and reputation. After all, decorating a house is not a trivial matter, and it is very troublesome to rework.

Remove dust and dirt from the surface of wood products and moldings (wood base).

Trim the burrs, forks and other defects on the surface of the wood base, and polish them with sand skin to make the corners neat.

Use oily putty (or transparent putty) for batch scraping, polishing, and polishing after recovering putty (when using varnish, first fill the brown eye and nail hole, and do local color repair work).

Apply the first coat of paint, refill the putty, and remove the surface dust after polishing.

Apply a second coat of paint, remove dust from the surface after polishing and water grinding with a water sand skin to repair the oily part.

Apply a third coat of paint until the desired result is achieved.

In home decoration, paint engineering occupies a very important part, the appearance of paint construction engineering has basically indicated that the decoration and more than half, the general paint construction process is for the interior surface to be more interesting, so what is the specific paint construction process.

Lead. In home decoration, paint engineering occupies a very important part, the emergence of paint construction engineering has basically indicated that the decoration and more than half, the general paint construction process is for the interior surface to be more interesting, so what are the specific steps of the paint construction process.

In home decoration, paint engineering occupies a very important part, the emergence of paint construction engineering has basically indicated that the decoration and more than half, the general paint construction process is for the interior surface to be more interesting, so what are the specific steps of the paint construction process.

When it comes to renovating a house, most of the owners leave it to the renovation company.

to decorate, which not only saves their own time, but also reduces some of the decoration troubles. Generally speaking, in home decoration, the paint project is generally the face of home decoration, if it is not done well, it will not only affect the quality of home decoration, but also leave many troubles to the owner, such as the appearance of paint loss, so in home decoration, what are the steps of the paint project?

1. Steps of painting project: preparation.

Before decoration, the construction personnel should prepare for painting in advance, generally including the cleaning of the paint environment, the protection measures of furniture, etc., such as the door and window frame is best pasted with a layer of color separation paper, and the furniture of wooden cabinets and partitions is best wrapped with a layer of newspaper, so as to avoid the situation that the paint drips on the surface of the furniture and is stained.

2. The steps of the paint project: color mixing.

In the home space area of the finish, first of all, calculate how much paint is needed to avoid the occurrence of insufficient paint or waste in the later stage, and then evenly allocate the required paint to prevent the surface of the furniture from being affected when painting, resulting in uniform color, and finally the primer is applied to avoid the texture of the furniture surface.

3. The steps of the painting project: construction.

If the owner has done the first two steps of the work, now officially entered the construction stage of painting, which is in the order of first hanging ceiling, lines, and then the wall. Generally speaking, it is necessary to repeat at least two times when painting the wall, but it is best to have a certain time interval between the two coats.

4. The steps of painting engineering: grinding.

After the painting is finished, in order to keep the wall smooth, we need to polish the wall, when the wall is sanded, we can touch the wall with our hands to see if the wall is smooth, and then use a softer putty.

Perform the process again, and then sweep the wall again.

5. Steps of painting project: cleaning.

After the construction personnel have completed the above steps, the owner can accept it, and during the acceptance, it is necessary to carefully check whether the wall and the surrounding area are clean and clean, and whether there are traces of paint in other places.