-
In fact, the overall summary of side parking is four words: "slow driving" and "fast fighting". Use the clutch to control the speed to each point.
The specific operation process of side parking is as follows:
Since there is a sideline on the left side, try to get as close to the right sideline as possible, about 30 cm, and it doesn't hurt to have more points to prevent the front of the car from sweeping the line.
When the right rearview mirror can not see the upper left corner of the library (at this time, the right rear wheel is basically level with the upper left corner of the library), to the right to kill the direction, the car body will not press the corner of the library.
Ignore the direction of death, quickly look at the left rearview mirror, and when you see or immediately see the lower right corner of the library, quickly return to the right direction (at this time the body is in a line with the lower right corner).
When the left rear wheel immediately presses the line, quickly hit the left direction, because the trajectory of the car will also drive backwards and inwards, so don't worry about not being able to enter the warehouse.
Out of the warehouse, first hit the left turn signal, left to kill, from the left rearview mirror to see the rear wheel pressed on the dotted line, to the right direction, how much to judge, the front of the car do not sweep the left sideline.
-
Hello. 1 7 Step by Step Reading.
At the start of the test, the car moves forward slowly, fine-tuning the steering wheel to keep the car between 30 cm and 50 cm from the right sideline and keeping the body straight. When observing from the car, when the wiper rivets are aligned with the garage sideline, the distance between the vehicle and the garage sideline is just 30-50 cm.
When the vehicle drives to the front of the garage, observes on the car, and the right rearview mirror just sees that the front line of the library is on the lower edge of the right rearview mirror, then the rear bumper of the vehicle is parallel to the front line of the garage and stops.
See 1 image remaining.
Hang in reverse gear, hit the direction to the right and start reversing. Observe the left rearview mirror while reversing, and when you see the second corner behind the garage, turn back to the right direction and let the car go straight back. When retreating, observe the left rear wheel through the left rearview mirror, and when the left rear wheel is about to touch the library edge line, hit the direction to the left.
See the remaining 2 images.
Go straight back in the right direction.
When the left rear wheel is about to touch the edge of the library, hit the direction to the left.
See 1 image remaining.
The vehicle slowly pulls into the garage, straightens the vehicle and stops. Reversing and warehousing is completed. The direction can not be corrected.
When leaving the garage, keep the steering wheel left to die, observe in the car, when the right side of the vehicle A-pillar coincides with the library line, and then kill to the right, and return to the right direction when the body is right. The outbound is complete.
Precautions. When reversing, the speed must be slow, and the direction must be fast.
With more practice, practice begets ingenuity.
-
1. Judge the length of the parking space. Before parking, you must judge whether the parking space can be based on the model you drive.
Generally speaking, the length of the car you drive plus a distance of one meter is enough to park on the side, but the technical requirements are also relatively high.
2. Adjust to the appropriate distance and prepare for reversing. After confirming that the parking space is sufficient to accommodate your car, drive your car to a position that is roughly flush with the car in front of you and about 1 meter laterally from the car in front. If necessary, the right mirror can be lowered until the right rear wheel can be seen, making it easier to see the distance.
3. Kill the steering wheel to the right. When you start reversing, hit the steering wheel like the right, then hold it and slowly reverse until the left mirror can fully see the front of the car behind you. At this time, quickly hit the steering wheel from the far right to the far left, and then continue to reverse.
4. Adjust the distance from the shoulder. In the process of continuing to reverse, you can observe the distance to the shoulder by adjusting the right rearview mirror at a lower angle, and then adjust the reversing trajectory to get as close to the shoulder as possible, and be sure to leave enough distance for the body to be straight. The distance between the right rear wheel and the shoulder must be seen through the right rearview mirror.
5. Straighten the body and adjust the distance between the front and rear. As the right rear wheel and shoulder slowly approach, the rear of the car will gradually move closer to the front of the rear car as the body gradually straightens. At this time, you can judge the distance from the rear car through the ** rearview mirror or reversing image, adjust the distance from the front and rear cars, and finally return the steering wheel to its position.
-
The steps for parking on the side of subject 2 are as follows:
Adjust the left rearview mirror so that the body occupies about 1 5 rearview mirrors (i.e., the lower left rear of the car can be seen in the left rearview mirror), and then adjust the right rearview mirror so that the body occupies about 1 5 rearview mirrors.
The body is on the left side of the garage, and the right wheel drives along the left side line of the garage, and the wheel is 50cm away from the left side line (from the seat, Santana generally presses the line at the position of the rear side of the hood 1 3), and stops 50cm before the upper side line of the garage.
When you're ready to reverse, turn on your left turn signal and start reversing. Looking at the No. 2 angle from the center pillar of the right window, when the No. 2 angle is 5 cm away from the center post, hit one and a half circles to the right (killed).
When point 4 appears in the left rearview mirror (i.e., the right rear corner of the garage), turn the wheel rim to the left (i.e., return to the right direction) and continue to reverse.
Look at the left rear wheel from the left rearview mirror, and when you are about to hit the edge line, you will stop the car in the direction of the left to the right (the rearview mirror on both sides observes that the body is parallel to the garage sideline).
For out of the library: first turn on the left turn signal, the steering wheel does not need to go back, hang 1 gear, when the gear sees the rightmost side of the hood over the left front garage No. 1 point, go back to the right wheel, continue to advance to the left line of the last section of the garage on the right side of the wiper, make a lap to the right, the car is back 1 lap, drive forward, and finally turn off the turn signal, that is, the end of side parking.
2017 latest subject two-sided parking skills.
Stop on the right side and aim at the right side line on the central axis.
Go straight and slow down past the right corner, and look in the right mirror when reversing.
Cover the right corner and kill the right one, and look forward to the left line to the middle.
Hit the left direction two full circles, and then look in the left rear mirror.
The rear wheel crimping line is killed on the right, and wait until the body is flat.
Stop the body and hang in first gear, and don't forget to flash the left light.
Slowly lift the clutch to look at the left corner, touch the left line and turn around.
The line goes back to the middle two times, and the body is out of the garage and the car is finished.
Exam Criteria: After the vehicle is stopped, the body is out of the line, and 100 points will be deducted.
If the wheel touches the lane edge while driving, 10 points will be deducted.
If you do not park in the garage, you will be deducted 100 points.
If you do not turn on the left turn signal at the start, 10 points will be deducted.
If the right turn signal is not turned on when reversing, 10 points will be deducted (adding demerit points, which previously only required the left turn signal to be turned on when stopping and starting, is also the easiest item to ignore and lead to deducted points.) )
100 points will be deducted for stopping in the middle of the trip.
-
Section two side parking tips and highlights.
1. The vehicle slowly passes through the side garage, keeping a distance of about 30cm between the body and the right sideline. When the lower line of the left rearview mirror crosses the stop line, you can press the clutch brake to stop the vehicle.
2. Hang into the reverse gear, turn on the right turn signal, slowly loosen the clutch to let the vehicle reverse smoothly, observe that the right rear wheel is flush with the front line of the library, and quickly hit the right full direction. Pay attention to the direction after hitting the full dead, loosen some clutch to avoid the vehicle from being powered enough to stop.
3. Continue to maintain a slow speed of reversing, observe the left rearview mirror, and quickly return to the right direction when you see the inner library angle.
4. Continue to reverse slowly, while observing the left rearview mirror, when the left rear wheel is pressed to the edge of the library dotted line, quickly hit the left full direction.
5. At this time, the body will gradually return to the right, when the rearview mirrors on both sides observe the balance between the body and the library line, you can step on the brakes to stop.
6. When starting out of the garage, first turn on the left turn signal, step on the clutch and hook into 1st gear, and then slowly release the clutch to let the vehicle start smoothly. When you see the front right corner of the hood pressed against the right curbline, go back to the right direction.
7. Continue to drive forward, when you see the left side of the hood 1 3 coincides with the yellow line of the road on the left, make a circle to the right, let the vehicle go around the corner of the garage and drive out of the parking space, and when the body is parallel to the direction of the road, go back to the left and continue to drive forward to drive out of the test area.
-
The first point: Kill to the right:
Rearview mirror method: through the rearview mirror to find the side of the parking point Xianghuai quietly is relatively easy, when the right side of the front of the library can not be seen from the right rear view of the trouser mirror, when the slag line in front of the right library is not seen, slowly to the right to kill the direction.
The second point: back to the positive direction:
Rearview mirror method: sit in the cockpit position and observe the right corner of the library in the left rearview mirror, and return to the right direction.
The third point: Kill to the left:
Rearview mirror method: Observe the left rearview mirror when you hit to the left, and when you see that the left rear wheel is just pressed to the white dotted line, quickly fill the steering wheel to the left.
Attached: Side Parking Test Standards:
1. After the vehicle is stopped, the body will be deducted 100 points.
2. If the wheels touch the lane edge during driving, 10 points will be deducted.
3. If you do not park in the warehouse, 100 points will be deducted.
4. If the left turn signal is not turned on at the start, 10 points will be deducted.
5. If you stop halfway, 100 points will be deducted.
-
The front of the car is forward, the side position is on the right side of the car body, the upper edge line of the tail and the side parking space ridge overlaps, the upper left corner of the side is point A, the lower right corner is point C, and the body is about 30-50 cm from the dotted line on the left side of the storage location.
Specific operation method of side parking:
1. When entering the side parking test area, drive the car to the position of the starting line more than a little bit, which can be observed through the rearview mirror on the right, and stop at the position of a little more than the starting line, and keep a distance of 30cm between the body and the right side library line.
2. Hang up the reverse gear, control the speed, ** left rearview mirror, when the bottom of the left rearview mirror can not see the library edge line, immediately turn the steering wheel to the right, and the speed of the steering wheel must be fast.
3. Continue to observe the left rearview mirror, and when you see the left rear door handle facing the right rear inner corner of the garage, return to the right direction.
4. When you see the left rear wheel of the car pressed to the dotted line of the garage in the left rearview mirror, immediately hit the steering wheel to the left, turn your head to see the corner on the left side of the front cover of the car completely enter the garage, and stop the car.
Side parking is mainly by pressing the clutch to control the speed, before the speed is as slow as possible, but the speed is too slow, often resulting in the test car destruction base car stalling. When the clutch is put too high and the speed is too fast, press down on the clutch a little. But if the pressure is too low, there will be a situation where the vehicle does not go, when you find that the speed of the car slows down significantly, then you must remember that you can not continue to lift the clutch upwards, you must quickly step on the clutch to the end, and then slowly lift it again, the car will not turn off, and you will get the speed you want.
Photo by Liao Wei of Pacific Automobile Network).
-
The first point: the direction of the right to the chama. It is relatively easy to use the reversing mirror to find the side parking point without a car, and when the horizontal yellow line in front of the right garage is not visible from the right reversing mirror, it gradually kills the direction to the right.
The second point: back to the positive direction:Sit in the driver's seat and observe the right corner of the garage in the left reversing mirror, and return to the right direction.
The third point: go to the left and kill the direction. Look at the left reversing mirror when you hit the left direction, and when you see that the left rear wheel is just pressed against the white dotted line, quickly hit the steering wheel to the left.
Attached: Parking test standards for the side of the year: 1. After the vehicle stops entering the garage, the body will go out of the line and deduct 100 points.
2. When the car wheel touches the frame line of the driving lane during driving, it is deducted by ten points. 3. If the car is not parked in the storage location, 100 points will be deducted. 4. If the left turn signal is not turned on at the start, ten points will be deducted.
5. 100 points will be deducted for halfway parking.
Section 2 test, also known as the road test, is part of the assessment and evaluation of motor vehicle driver's license, is the general name of the content of the driving technology test, car C1C2 test items include reversing, side parking, ramp fixed-point parking and starting, right-angle turning, curve driving (commonly known as S bend) five compulsory tests (some places also have a sixth high-speed card). The second subject is mainly to examine the candidate's level of car control and parking level in the case of semi-linkage, and this examination process not only requires candidates to have good driving skills, but also has excellent psychological quality, both of which are indispensable. How long does it take for the second exam for ordinary people, which varies from person to person, after all, everyone's learning ability and psychological quality are different.
If you have strong learning ability and strong psychological quality, you can make an appointment for the test after completing the class hours according to the teaching plan of the driving school. If the 16 hours have passed, and the technical and psychological quality is not enough, it is necessary to increase the corresponding class hours and practice more.
Millions of car purchase subsidies.
-
1. Side parking, mainly look at 2 points 1 line, the upper left corner of the side direction is point A, the lower right corner is point C, which refers to the front of the car forward, the side position is on the right side of the car body, and at this time the upper line of the rear and side parking spaces coincides, and the body is about 30-50 cm away from the dotted line on the left side of the storage location.
2. Reversing backwards, the A angle of the storage position can be observed in the right reversing mirror, and when the A point disappears from the reversing mirror, the steering wheel is quickly killed to the right. At this time, he Xi did filial piety to observe the left rearview Zen cautious mirror, slowly reverse, when point C appeared in the left rearview mirror, quickly return to the right direction, at this time observe the left rear wheel of the car. When the left rear wheel of the car is about to press against the left line of the garage, quickly hit the left in the direction of death.
After observing the reversing mirror, the steering wheel was returned to the center when the body returned to the center and the brake was pressed, and the reverse was successful. Out of the garage to change the forward gear, the car immediately left to kill, observe the left rear wheel to leave the left line of the garage, immediately to the right back direction to drive out.
-
The parking on the second side of the subject mainly looks at 2 points, the upper left corner of the side direction is point A, and the lower right corner is point C. The following are the precautions for the second subject of the test: 1. Reversing into the warehouse:
The main deduction points for reversing into the warehouse include the reverse line, the car does not enter the warehouse, overtime, and does not follow the prescribed route. After the reform of the new regulations, the time limit for reversing into the warehouse must be completed within 210 seconds, and the overtime results are unqualified, and the test is first reversed to the right, and then the left is reversed. 2. Side parking:
The main deduction points for side parking are in the turn signal, 30cm margin and the problem of pressing the line, when entering the test area, you should observe the highest point of the wiper in advance and the curb line coincide with the direction of the right direction, adjust the 30cm margin, and remember the first right dead point, back to the right, and kill to the left, enter the park, turn on the left turn signal, and observe the rearview mirror when leaving the warehouse to prevent the wheels on both sides of the line. 3. Right-angle turn: the main deduction point for right-angle turning is in the turn signal and the two problems of the line, turn on the turn signal after entering the test area, after the voice prompt, turn off the turn signal, and deduct 10 points for the wrong operation of the turn signal, after entering the right-angle turn, you need to adjust the 30cm margin between the body and the sideline, the point of view is the same as the side parking, when the dead point, you can slightly loosen the clutch to prevent stopping or turning off halfway, and then return to the body after the rear wheel out of the warehouse to prevent the wheel from pressing the line.
Principle of square and side parking of semi-trailers.
1. The semi-trailer is side by side with the adjacent car. >>>More
Introduce to the students how to use the "left and right looking method" to end this "old and difficult" problem. >>>More
The first method is that if your clutch pedal is completely pressed to the end, there is no damage to the car, but the disadvantage of deceleration is that when the clutch is pressed to the end, the car will not only not slow down, but will speed up for a moment because of the loss of gear control. >>>More
The first level: reversing into storage.
Candidates need to find the right spot, pour in from one side and drive out to the other side, and then pour in once from the other side. >>>More
The body of the body, all the cases of finding the edge line are within 30 cm of the distance from the body. >>>More