What is the reason why I can t connect to the server with data, and the mobile phone traffic is norm

1. If you can't access the Internet, please try to turn off and restart; Please check whether the maximum flow rate threshold for this month has been reached; Please check whether your phone settings mobile data is turned on; Set the mobile data option APN and whether the name is set to 3GNET.

2. If you still can't access the Internet, it is recommended that you troubleshoot in the following ways:

Check whether there is a network, it is recommended that you can use it in a place with a strong signal;

Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge before you can use it;

Confirm whether the parameters of the mobile phone have been set;

Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

Check whether there is a problem with the mobile phone, it is recommended that you change the phone for testing;

In case of traffic capping, it will also lead to the inability to access the Internet;

The number has not been registered with the real name, and the real-name registration has not been completed within the time limit, and the service will be suspended;

3. If the above situation is not the case, it is recommended that you contact the manual customer service of Unicom in the place where you belong for consultation, and the actual situation is subject to the local policy.

It shows that the software has high requirements for the network environment. Generally, there will be no problem with 4G networks. There's also the setting you set up yourself.

This is because the network speed is too low to connect to the server, it is recommended to restore the network settings, the specific operation is as follows:

1. Open the Hand Huai virtual machine lead burning, find the "Settings" button on the home page of the screen, and click the button.

<>4. After that, click the "Reset Network Settings" button, as shown in the figure below.

5. After that, a window pops up at the bottom of the page, click the "Reset Network Settings" button.

<>7. After that, the network can be used normally, and any software can be opened and found to be able to be used normally.

Summary. Hello there. There's a way.

This situation is usually a signal problem with the traffic, you can try to change the location or restart the phone will get better. Then you can surf the Internet normally. I hope this answer can help you, and finally I wish you a happy life, all the best, and a happy <> every day

<> mobile phone traffic is normal, but I can't connect to the server, what is the reason?

Hello there. There is a way to close the room. This situation is generally a signal problem with the traffic, you can try to change the position or restart the phone will get better.

Then you can surf the Internet normally. I hope this answer can help you, and finally I wish you a happy life, all the best, and a happy <> every day

<> the Internet is normal, when there are some **, you can't connect to the server, can you solve the problem? 20:16 Electric grip on the digital expert Kiki Trace Leather Key.

Then this is the problem of **, not to let in, not to enter, not to enter. It's not a phone or data issue. You just need to use the device normally.

Is there a solution to the problem?

Find a developer who designs **.

Internet access is normal, when there are some **, you can't connect to the server, can you solve it?

Restart your phone or disconnect from the network and reconnect.

Others**click in,Some**can't get in,It shouldn't be a problem with the network.。 Can the problem be solved?

You can't solve it on your own. Try a different phone device.

Summary. The reasons are as follows: 1. Check whether the SIM card is enabled GPRS Internet service will be temporarily closed.

To use the mobile phone data Internet function, the ** card needs to activate the data data Internet service. You can contact the local network provider of **card** to open the data traffic Internet service. 2. Check whether the "Mobile Data" switch is turned on.

Slide your finger down on the top curtain of the screen, slide the shortcut bar to the left, and turn the "Mobile Data" dot green. 3. Reset the Internet access parameters. In standby mode, select Apps - Settings - Connections - More Settings - Mobile Network - Tap the name of the access point - Menu - Reset to Default Settings - After the settings are completed, restart your phone to surf the Internet.

Note: If you are using a mobile card that does not support NET services, you can select a WAP access point.

<> mobile phone traffic is normal, but I can't connect to the server, what is the reason?

The reasons are as follows: 1. Check whether the SIM card is enabled GPRS Internet service, which will be turned off when you are about to touch the game. To use the mobile phone data Internet function, the ** card needs to activate the data data Internet service.

You can contact the local network provider of **card** to open the data traffic Internet service. 2. Check whether the "Mobile Data" switch is turned on. Slide your finger down on the top curtain of the screen, slide the shortcut bar to the left, and turn the "Mobile Data" dot green.

3. Reset the Internet access parameters. In standby mode, select Apps - Settings - Connections - More Settings - Mobile Network - Tap the access point name - Menu - Reset to Default Settings - After the settings are completed, restart your phone to surf the Internet. Note:

If you are using a mobile card that does not support NET services, you can select a WAP access point.

Can you add, I don't quite understand it.

The specific reasons and solutions are as follows:

1. First of all, you need to check whether you are in arrears, and you can't access the Internet if you are in arrears.

2. Then see if the data traffic is turned on and the airplane mode is turned on.

3. It is also possible that the data traffic network speed is slow enough, which may lead to the inability to connect, it is recommended to surf the Internet in a place with a fast network speed;

5. Confirm that the wifi of the mobile phone can be connected, you can restart the mobile phone, ignore the wifi and reconnect or restart the router;

6. If it still doesn't work, it turns out that it is a problem with the server, please try to connect to the server later.

The cause may be a network or server problem, and the solution is as follows:

1. It is best to use wifi connection, the cellular data network connection is slow, and sometimes it will not be able to connect after entering;

2. Confirm that the wifi of the mobile phone can be connected, you can restart the mobile phone, ignore the wifi and reconnect or restart the router;

3. Go to your phone's Settings - General - Restore - Reset network settings, and reconnect to the network.

4. If it still doesn't work, it turns out that it is a problem with the server, please try to connect to the server later.

If your mobile phone cannot access the Internet, we recommend that you troubleshoot the problem in the following ways:

Check whether there is a network, it is recommended that you can use it in a place with a strong signal;

Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge before you can use it;

Confirm whether the parameters of the mobile phone have been set;

Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

Check whether there is a problem with the mobile phone, it is recommended that you change the phone for testing;

When the total traffic generated by the Internet reaches the maximum traffic cap value in the current month, the system will automatically turn off the Internet access function, and the Internet access will be automatically resumed in the next month.

The number has not been registered with the real name, and the real-name registration has not been completed within the time limit, and the service will be suspended;

If it still cannot be used normally after self-service troubleshooting, it is recommended that you contact the local customer service for verification and processing.

If you can't access the internet while using data, it's a good idea to check if some or all of the apps aren't available first.

2.If some software cannot access the Internet, please click on the network assistant or third-party security management software to check whether the software is restricted from accessing the Internet.

3.If you can't access the Internet with all the software, it is recommended that you check whether the access point settings of the network are correct.

How to set it up:1First of all, make sure that you have turned on the data function, and if you have dual SIM cards, you need to choose the right card to use. Then enter"Settings"Inside, this different mobile phone has different ways to enter, and the interface will be different after entering.

2.Select the Wireless & Networks setting.

3.Then select Mobile Network settings to make sure that the card number for data and data connection is enabled.

4.Select "Card 1 Settings" (or "Card 2 Settings" depending on which card you use for traffic).

5.If you don't select "Network Mode", it's generally the first one by default.

6.The key point here is - click to select "Network Operator", and the automatic selection is good.

7.So this method is to re-select "Network Operator", which is equivalent to refreshing the network connection.

The signal is not good.

Classification: Railway signals can be divided into fixed signals, mobile signals and hand signals according to whether the signal is movable.

Features: There is a certain causal relationship between a signal and its representative counterpart, in this sense, all symbols are signals. There is usually a one-to-one relationship between a signal and what it represents.

Scheme introduction: digital data transmission uses PCM digital channel to transmit data signals, and the first problem to be solved is how the data signal enters the PCM channel. There are two main methods: synchronous mode and asynchronous mode.

Android phones often have the possibility of depressing the battery or airplane mode.

I'm like that too, and then there's no way around it, you don't solve it.

Hi! You try to open the other one to see if it can be used normally, if it can, then this prompt may be the other party** or the app's server is faulty.

One scenario: you are in arrears.

Two scenarios: There was no signal at that time.

Are you in airplane mode? Or is your phone in arrears? Seek adoption.