Why does the computer blue screen PS when booting VMware The system is win7, asus notebook

Hello, computer blue screen, mainly: "memory error" or "software incompatibility" caused!

1。Try to boot up, after the computer brand is out, press F8, Safe Mode, Cursor Select: Last Correct Configuration, Enter, Enter, Press Down! [Critical step].

2。No more, enter the safe mode, press enter, and after going to the desktop, antivirus software, full antivirus!

Quarantine" stuff, completely removed!

3。Reuse: 360 Security Guard, in the "Function Encyclopedia": "360 System First Aid Kit", point: start first aid! After restarting, click on the "File Recovery Area" and select all to completely delete the files!

System Repair, Select All, Fix Now! [Critical step].

Network Repair, Start Repair, Restart PC!

360 Security Guard, Scan Plugins, Clean Now! 360 Security Guard, System Repair, One-click Repair!

Kingsoft First Aid Kit], check: [Extended Scan], Scan Now, Process Now, Restart the computer!

4。If you can't do it again, unplug the graphics card and memory module, erase it, use a brush again, clean the slot dust and fan, replace the memory slot, etc.! [Desktop].

etc., uninstall the redundant, and only leave one, because similar software is not compatible with each other! [Critical step].

7。If it still doesn't work, you need to "one-click restore" or "reinstall the system"!

8。If there is a problem with the hardware, send it for repair!

What is the virtual machine used by the landlord? Is the version too low? It is recommended to use VMware8,I've used it,There's no problem with installing win7,If you use VMware8, it's not good.,Maybe your computer configuration is not compatible with win7 or there is a problem with the boot disc you made.。

Error analysis: Mainly caused by faulty drivers, defective or incompatible hardware and software. From a technical point of view. Indicate.

In kernel mode, there is an indomitably high internal process request level (IRQL) to access memory addresses that it does not have permission to access.

It's hardware incompatible, you can try to go into the BIOS and set it up.

It should be that there is a problem with the XP you installed in VMware. Reinstall it.

Here's how to do it:

Log in to the installed VMware vSphere Client, fill in the login address and fill in the IP address set in step 2, the user name is root, and the password is the password set by the user.

After logging in, select "File" in the upper left corner, click New, and select New Virtual Machine;

At this point, the virtual machine settings are all completed, right-click the virtual machine name on the left side of the main screen, (that is, the virtual machine name set by the user before) and select Power - Turn on the power;

During the boot of the virtual machine, jump to the win7 installation interface, and follow the steps to install win7 on the pc step by step.

In fact, it's very simple, you are a ghost system, this is a one-click recovery interface, and the blue screen is that you don't have a good system installed, or other problems.

It's hard to say specifically.

System problems, virtual machine problems can really not be solved **find: micro** to help you install, and drive well. I've installed it before.

Insufficient memory at least 4 GB of RAM can be installed.

I saw a blog on the Internet that said the method, and I tried it before. But the last time there was a problem again.,I found that in fact, it's okay to wait a little longer.,The interface will also come out.,After the interface comes out.,The screen is still blue.,Restart the following system.,It's no problem.。 You don't need to fix it.

If you are really in a hurry, you can try the following methods.

1.Go to the character interface: Ctrl + Alt + F4, then install the corresponding service, then reset it!

2. sudo apt-get install xserver-xorg-lts-utopic

3. sudo dpkg-reconfigure xserver-xorg-lts-utopic

4. reboot

If there is a problem with the first operation in the previous one, you need to reset dpkg and try again, just follow the prompts.

Some need to be preceded by a sudo to execute.

If your problem is solved, give a thumbs up and go!

1. Use Process Explorer to kill the process (if any) 2. Clear the virtual machine.

directory. lck file.

3. On the dos command line.

run net start vmx86 to start the peer process

In 2020, there is a conflict between some versions of Win10 Professional and VMware, and the version will have a blue screen, so you can update it.

This problem is generally caused by the mismatch between the Windows version and the VMware version, I also encountered this problem, using various methods on the Internet did not work, the easiest way is to directly upgrade the Windows system version and VMware version to the latest version, my problem has been solved.

That's because there's a problem with the hard drive (not the partition) where you installed VMware.

Install it on the partition of another hard disk (provided you have two or more hard disks) or lower it (special tool grid is not a normal format) and then redivide it. It's troublesome.

So you better don't use it.

Remove the printer from the virtual machine settings.

If the hardware of the system and the configuration of the virtual machine are incompatible, it is recommended to change to a more stable virtual machine version, or try to run the virtual machine under the XP system.

There are many possible problems with the blue screen, it may be a compatibility problem, it can also be a driver problem, etc., you have to look at the blue screen yourself**, and find out what is causing it!

Microsoft's error** for reference.

0x0000007b: Inacessible Boot Device Error Analysis: Windows is unable to access the system partition or boot volume during the boot process.

It usually occurs when the motherboard is booted for the first time after the motherboard is replaced, mainly because the IDE controller of the new motherboard and the old motherboard use different chipsets. Sometimes it can also be caused by viruses or hard drive damage. Solution:

Generally, you can simply boot the computer with the installation disc and then perform a repair installation to solve the problem. For viruses, you can use the DOS version of the antivirus software to detect and kill (the main battle has KV2005DOS version**).If there is a problem with the hard drive itself, install it on another computer and use it"chkdsk /r"to check and fix disk errors.

Say it's a problem with the hardware driver, restart it.

Has it been solved? I'm having this issue as well.

The reasons for the failure of the freeze and blue screen are as follows!

1. It is just an accidental event, and it can be eliminated by restarting. This possibility cannot be ruled out, because it exists in terms of probability, and we cannot stubbornly think that the computer is faulty because of a blue screen!

2. Overclocking causes blue screen and crash! 3. Dust problem. Regularly cleaning up the garbage in the case can effectively prevent the occurrence of crashes and blue screens!

4. Check whether the wiring in the chassis is loose, whether the hard disk interface, etc., and whether the graphics card, network card, sound card, memory, etc. are plugged in tightly. Hold the letter.

6. Infection with viruses. Enter Safe Mode for complete anti-virus! It's good to check and kill all the things on the butler antivirus page.

7. Driver problems. Re-drive after the hardware detection in the Butler toolbox.

8. Hardware resource conflicts. Abnormal error caused by conflicting graphics card or sound card settings. The solution is to enter the "Safe Mode" and "Control Panel - System Slip System - Device Management" to make appropriate adjustments, which can generally be solved!

9. Power supply problems. Due to the instability of the inferior power supply voltage, it is very likely to cause a series of problems, such as the phenomenon of crashing for no reason, restarting the blue screen, etc., the blue screen caused by the power supply problem is mainly because the voltage is unstable, and the boot time is too long, and some pulse resistors are formed in a series of devices such as the graphics card, and the computer will find the error when it is shut down, so it causes the blue screen or crash!

Glad to answer for you :

1。If there is a virus in the computer (open Tencent PC Manager, antivirus, scan and kill), if you kill a Trojan horse or virus, you should restart it immediately, and after restarting the computer, go to "Quarantine|".Recover", completely remove trojans and viruses!

6。Poor contact and loose contact of the graphics card or memory CPU, or fan with dust cover, (unplug the eraser).

7。The memory CPU is overheated, and the heat dissipation is not good! (Don't turn on for too long, turn off and dissipate).

9。If it still doesn't work, the system files are missing! Or maybe there's a serious error in the system memory!

10。Try to press F8 after booting, go back to the virtual orange car, enter, enter the poor liquid group safety mode, the last correct configuration, press down to try! Or, enter the safe mode, go to the desktop, open Tencent PC Manager, and kill the virus!

11。Playing games on the blue screen, generally the system does not support this game! (Change the game version or change the XP system).

12。**game,**device,**input method,**tool,browser,driver, etc.,The program is unstable! (Use Tencent PC Manager to uninstall and reinstall or upgrade to the latest version)!

I wish the landlord a smooth work and a happy life!!

Press F8 to move to the advanced option immediately after booting up, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a blue screen, it is recommended to overhaul it).

If such a problem arises due to software conflicts, inappropriate drivers, or system problems, you can restore the system in safe mode, or you can't reinstall the operating system, don't install software, patches, drivers, etc., and see if there are still problems with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

Please tell us more about how you performed on the computer before the blue screen and how you operated. **What software, patches, and hardware have been upgraded? Tell me in detail what you did before the blue screen, it may be the occurrence of the blue screen caused by these operations, please ask me if you have any questions (I will re-follow you according to the information you provided).

3. If the blue screen shutdown does not often appear at boot, it is OK, or it doesn't work, please press F8 to turn on the advanced option to let go, select "The latest correct configuration" Enter to repair, and restore the system or reinstall the system if it doesn't work.

4. If it is caused by hardware problems, or if the hardware is overclocked and the BIOS battery is discharged (restore the BIOS factory default), it is recommended to plug and unplug the graphics card, memory and other hardware, clean up the hygiene in the computer, and polish the gold finger of the graphics card and memory (test whether the temperature of the hardware is too high).

5. The computer is opened abnormally when the optical drive is being read, which can lead to a blue screen, and the disc can be re-inserted into the optical drive. When the computer is plugged and unplugged with power, it can cause a blue screen, restart the computer to repair it or fix it according to the third item above.

6. There is also whether there is a problem with the hard disk, use the system's built-in function to repair it or repair the bad sectors of the hard disk, or format the hard disk to repartition and reinstall the system, or if it doesn't work, you need to change the hard disk.

7. Recently upgraded hardware, these hardware is not compatible with the system, such as: memory, graphics card, etc., please replace the hardware to try (until the place where the hardware is upgraded is replaced).

8. If it is caused by hardware problems, and you can't find the problem, it is recommended to go to the maintenance there for maintenance.

9. Playing games with a blue screen, it is generally a problem with the game itself, the configuration of the computer conflicts with the game, the graphics card, the graphics card driver is not suitable, the temperature of the CPU and graphics card is too high, the memory is too small, etc., and the other is when playing the game and selling the show, watching, at the same time, it is easiest to do other operations Blue screen, so don't operate other things when playing games and watching the sail (see the blue screen problem is the same as above).

I guess the PE system is too old to be compatible.