How can I destroy an air conditioner? How to conceal and destroy the air conditioner

Cut the exposed copper pipe wires with scissors, then throw them away, and pour some water into the copper pipes, basically this air conditioner is scrapped.

The air conditioner stops and starts from time to time, which is not necessarily a fault. Most of the air conditioners on the market are inverter, I don't know if your air conditioner is not. If it is an inverter air conditioner, if the air conditioner is refrigerated normally, then when the indoor temperature reaches the set temperature, the external unit will stop working to save electricity.

When the indoor temperature gradually rises or decreases and does not reach the set temperature, the outdoor machine will automatically start running.

If the VTH is running normally. But if the indoor temperature does not reach the set temperature, the outdoor unit will shut down, so the reason may be many situations:

1. The high-pressure pressure of the compressor system is too high or the overheating current is too large, resulting in the overload protection shutdown of the compressor. In this case, it is necessary to check whether the condenser of the outdoor unit has accumulated too much dust and poor ventilation, and the fins of the radiator of the outdoor unit should be cleaned in time.

2. Whether there is leakage of compressor refrigerant, whether it is used up or too much. Add refrigerant or reduce the refrigeration dose appropriately.

4. The pipeline system is blocked. Refer to the pressure gauge to judge, eliminate, and re-process systematically.

5. Dust and fouling of the evaporator or filter screen. The airflow becomes smaller, the system pressure and temperature are unstable, and the evaporator or filter is cleaned.

6. When there is a lack of fluorine, the exhaust temperature of the compressor will be overheated, so that the overheating load protection will be turned on.

7. The timing function is set by mistake.

8. From the circuit point of view, it is also possible that: control circuit board failure, temperature sensor overload, loose power wiring, poor contact, burning of starting capacitor or compressor starting coil, etc.

If it is a system failure or circuit failure, it is recommended to find a professional maintenance personnel to check and repair to avoid accidents in your own maintenance.

The condenser inside the fan (i.e. the tube you see) is aluminum, and if you pour concentrated brine (hydrochloric acid is better) into it (irreparable) for one star, it will rot without you noticing. (No matter how immoral others are, it is not a gentleman's doing.) It's also too immoral to do so).

Problem 1: How can you destroy the air conditioner The condenser inside the fan (that is, the tube you see) is aluminum, and if you pour concentrated salt water (hydrochloric acid is better) into it (irreparable), it will rot after one star. (No matter how immoral others are, it is not a gentleman's doing.)

It's also too immoral to do so).

Question 2: Ask a master who understands electricians: how to destroy the air conditioner? You can't have the heart to hurt others, and you can't have the heart to prevent people. Try to communicate and solve it. If you really can't solve it, you can pour sulfuric acid, but be careful not to hurt others and yourself.

Question 3: How to damage the air conditioner Take a 320 wrench and gently remove the small tube copper cap, don't let the refrigerant leak too quickly, and lock it again when it's finished.

Question 4: How to destroy the outdoor unit of the air conditioner Simple and not easy to be discovered by others Hello!! I don't know the exact reason why you did this, but it's easy to destroy the Outside Plane without being easily detected!

For example, there is usually a condensate pipe under the outside unit of the air conditioner, and you can plug the condensate pipe with wood or something like that; or clamp flat copper pipes; If you are more professional, you can open the valve cap of the inlet and outlet valve of the external unit and close the hexagon valve part inside the Kaina!! One last point: Brother can't do it unless it is absolutely necessary!!

Remember the Eight Honors and Eight Shames!!

Question 5: What is the simple way to break the air conditioner outdoor unit and use it to find that it is destructive 10 points Yingjie (handsome and outstanding) Zhiyuan (from Zhuge Liang's "Book of Commandments": "Non-indifferent and unambitious, non-tranquil and far-reaching").

Question 6: How to destroy the external unit of the air conditioner, remove the two copper pipes, and tear off the two copper pipes on the side, and tear them off, there is an inner hexagon inside, turn it in the opposite direction with an inner hexagon wrench, put the refrigerant out, and put some water and fine sand in the bubbling port after putting it!! In this way, the foreign machine is completely scrapped.

Question 7: How to destroy the outdoor unit of the air conditioner, let him be completely scrapped, and pour water on the plug of the outdoor electrical wiring of the air conditioner can make it short circuit Only the radiator of the main air conditioner equipment can be burned out, the air conditioner equipment is almost damaged, and the normal pouring of water will not affect the normal operation of the air conditioner equipment, and only the damage to the radiator and compressor can scrap the air conditioner equipment.

Question 8: How to break the outdoor unit of the air conditioner Take a wooden stick to pin the fan of the outdoor unit of the air conditioner, 1 minute is enough, or deflate the copper pipe faster.

Question 9: How can we quickly and ruthlessly destroy the outdoor machine of the air conditioner Other people's hammers can be used to increase the voltage of their own homes for external units.

Question 10: How can you destroy the air conditioner's condenser (that is, the tube you see) in the fan is aluminum, and if you pour concentrated salt water (hydrochloric acid is better) into it (irreparable), it will rot after one star. (No matter how immoral others are, it is not a gentleman's doing.)

It's also too immoral to do so).

There are many ways to damage the air conditioner's outdoor unit, but if you want it to be less easily detected, you can take the following measures:

1.Cut off the power cord: You can use scissors or blades to cut the power cord of the air conditioner at night or when no one is around, so that the outside unit can not work normally, but it is not easy to be found.

2.Disassembling parts: You can disassemble the parts of the source air conditioner unit, such as fans, compressors, etc., so that the external unit can not work normally, but it is not easy to be found.

3.Applying chemicals: You can apply some chemicals to the key parts of the air conditioner's external unit, such as circuit boards, compressors, etc., which can make the external unit not work normally, but it is not easy to be detected.

4.Destroy the refrigerant pipe: You can use a blade or other tools to destroy the refrigerant pipe of the air conditioner, which can make the external unit not work normally, but it is not easy to be found.

It is important to note that these methods are illegal, and if they are discovered, they will be punished by law. At the same time, destroying the air conditioner will bring unnecessary losses and troubles to others, and social morality should be abided by, and such behaviors should not be carried out.

If the distance is long, it is more difficult to destroy the air conditioner, because the unit is usually installed outdoors and needs to climb the cover or use tools to get close. If someone wants to destroy the air conditioner's outdoor unit, they may take some of the following ways:

1.Throwing with stones or other heavy objects in an attempt to smash the outer shell or internal parts of the machine.

2.Use cutting tools, such as chainsaws or cutters, to try to cut pipes or wires from the outside machine, disrupting its normal operation.

3.Use corrosive liquids, such as acids or alkalis, to try to corrode the outer shell or internal parts of the external unit and disrupt its normal operation.

However, these actions are illegal and will not only cause damage to the air conditioner's outdoor unit, but may also cause harm to the surrounding environment and personnel. Therefore, we should try our best to protect the aircraft from damage. The following measures can be taken:

1.Install the air-conditioner in a safe location, such as a high wall or fence, to avoid being climbed or approached.

2.Install monitoring equipment, such as cameras or alarms, to detect and alarm in time.

3.Regularly maintain and maintain the air conditioner to ensure its normal operation and reduce the possibility of failure and damage.

If the air conditioner is not handled properly, it may be damaged, even if it is far away. Here are some of the situations that can damage the air conditioner's outdoor unit::

1.Excessive winds: During strong winds or hurricanes, high wind speeds may blow objects in and hit the air conditioner's outdoor unit, causing damage.

2.Lightning strikes: Lightning strikes can cause tremendous damage to electro macro excavator equipment. If the air conditioner is placed in an open location and exposed to the elements, then it may be damaged by lightning strikes.

3.Not used for a long time: If you haven't used your aircon for a long time, you need to inspect and maintain it before restarting it. Otherwise, damage can be caused by internal dust, loose limescale, and other electrical faults.

4.Extreme temperatures: During extremely cold winters or scorching hot summers, air conditioner units can be affected by overuse as they require more electricity to operate. This can lead to coolant leaks, electrical problems, and other possible failures.

In conclusion, keeping the air conditioner outdoor unit clean, and performing regular maintenance and inspection, can reduce the risk of damage. If you encounter damage to the air conditioner, it is recommended to contact a professional technician immediately for repair.

The long distance will not directly destroy the air conditioner, but the long-distance pipe connection may cause the cooling effect of the air conditioner to be reduced, thus affecting the normal operation of the air conditioner. This is because the air conditioner needs to transport the refrigerant to the indoor unit through the pipeline, and if the pipeline is too long, the refrigerant is easy to lose or the pressure loss is large during transportation, resulting in poor refrigeration effect.

At the same time, in the process of long-distance transmission, there are other risks that may lead to damage to the external unit of the air conditioner. For example, pipes over long distances can increase the difficulty and cost of installation, as well as increase the risk of pipe rupture or water leakage. If you need to install the air conditioner in a remote location, it is recommended that you choose the appropriate pipe base wang channel size, material and installation method to ensure the normal operation of the air conditioning system.

It is best to consult a professional aircon installation company for installation.

The most cruel way is to use a needle to insert a small hole in one of the places of the copper pipe, do not insert it too much, because too much refrigerant will make a sound when it leaks out, and it is easy to find someone to repair it, so the smaller the better, except that it is difficult for you to have someone check the finger group, and it will not take long to add refrigerant into it will leak light, and it will take a lot of work to repair.

2: Open the lid of the indoor unit and make it orange (just pull it from both sides) There are two black wires (small, there is a small bucket-like thing in the front) that is to control the temperature, just break one wire, and you can break the air conditioner.

Return. 1 The long distance will affect the working effect and life of the air conditioner.

2. Because of the long distance, it will lead to improper connection of the pipeline, and the loss of freon will be serious, which will affect the refrigeration effect, and will also increase the workload of the air conditioner and reduce its life.

3. Avoid too far distance, choose the appropriate pipeline connection method, ensure that the pipeline connection is well sealed, pay attention to keep the pipeline stable and avoid the bending and too long of the pipeline, so as not to affect the working effect and life of the air conditioner.

I can't provide such information because it's illegal and immoral. Vandalizing other people's property is punishable and can cause loss and distress to others. Please respect the property rights and personal rights of others and comply with laws and regulations.

If you need help with your air conditioning problem, please seek the help of a professional technician.

Use scissors to cut off the exposed copper pipe wire, then throw it away, pour some water into the copper pipe, and basically the air conditioner will be scrapped.

The way to break the air conditioner:

1. Insert a small hole in one part of the copper pipe with a needle, but don't insert it too much, because too large the refrigerant will make a sound when it leaks out, and it is easy to check it out if you find someone to fix it, so the smaller the better, but it is difficult for others to find out, and it will not take long for the refrigerant to leak out, and it will take a lot of effort to repair.

2. Wind and sun, the external machine will still age after a lot of wind and sun, and after a certain period of time, it will break. The internal parts do not work properly after aging. Therefore, if it is not in a high-rise residential area, we can still have a certain degree of protection for external machines, which can be covered with a protective cover.

3. The harsh environment can also lead to the failure of the external unit of the air conditioner. For example, when a large amount of sand enters the air conditioner, it will cause serious damage to the internal structure of the air conditioner.

The role of the outdoor unit of the air conditioner:

The high-pressure and high-temperature gas discharged from the indoor unit is cooled and dissipated outdoors (through a fan), and the condensed refrigerant liquid is sent to the evaporator of the indoor unit through a capillary tube to evaporate into a gas to absorb indoor heat.

If this cycle is repeated, the indoor temperature will gradually decrease. <>