What to do if your face hurts after welding, what should I do if my face hurts after welding

Welding baking face is a kind of burn, welding baking face is generally facial pain, peeling, severe is the phenomenon of blistering, welding baking face should be dealt with in a timely manner**, to clean the affected area with cool water in time, and then smear with cool things, such as toothpaste or aloe vera, etc., can relieve pain, if it is severe peeling and blistering, it is necessary to use burn ointment**, it can relieve pain, ** when paying attention to the affected area is not touching the water, to clean the affected area, Keep dry to prevent infection.

Pay attention to strengthen protection, use welding masks, pay attention to the combination of work and rest, do not carry out welding operations for a long time every day, and take a proper rest after working for a period of time.

This is UV killing** It will peel off after a few days It will be natural after peeling You can apply Vaseline to your face before welding After you are done, wash your face with water and soap so that it will not hurt your face**.

It's a heat burn, and it feels like the fire is burning - think so fast; It is best to take anti-inflammatory injections and rhubarb water for external application.

Question 1: What should I do if my face hurts after welding? Electric welding roasted face is a kind of burn, electric welding roasted face is generally facial pain, peeling, serious is the phenomenon of blistering, welding roasted face should be dealt with in a timely manner**, to wash the affected area with cold water in time, and then smear with cool things, such as toothpaste or aloe vera, etc., can relieve pain, if it is severe peeling and blistering, it is necessary to use burn ointment**, it can relieve pain, ** when paying attention to the affected area is not to touch the water, to clean the affected area, Keep dry to prevent infection.

Question 3: What should I do if I bake my face by electric welding, my face hurts Remember not to regret what cosmetics to use for three days, basic lotion care is enough, ** has a self-repair function, remember not to use foundation.

Question 4: What is the problem with welding the face of welding will be very painful, what to do The strong light of welding will burn the ** on the face. Wear a welding shield, insulating gloves, wear long sleeves on your clothes, and cover the **.

Question 5: What should I do if my face is red and my face hurts after welding Wear a mask when welding to prevent UV burns. Rub some badger oil or moisturizer after burns.

Most of the welding injuries to the face are radiation injuries caused by electric welding, and the specific analysis of the methods and precautions is as follows:

First, the method.

If the face is injured by welding**If inflammatory erythema or burns occur, it is recommended to immediately apply a cold and wet compress with a 3% boric acid solution. When there is no 3% boric acid solution around, you can also use normal saline wet compress to cool down in time and relieve symptoms. When accompanied by significant pain, oral anti-inflammatory drugs and glucocorticoids, such as aceclofenac dispersible tablets, prednisone acetate tablets, etc., are recommended.

In addition, if the skin lesion of the welding wound is enlarged, antihistamines can be taken to relieve it, such as levocetirizine hydrochloride tablets. After being injured by electric welding, it is necessary to observe the condition of the wound at all times, and once the symptoms are severe and edema or blisters appear, it is necessary to immediately use ointments with anti-inflammatory effects, such as fusidic acid cream.

2. Precautions.

Welders should wear work clothes, gloves, and face protectors before working.

Due to the strong arc light of electric welding, it will cause damage to the ** tissue, once injured, it is necessary to immediately find ice cubes and ice the injured part. Patients who are able to do so can also apply ice silk to their faces to reduce the severity of burns.

If the symptoms are severe, it is recommended to seek medical attention promptly after emergency treatment.

Cold compresses with ice water can reduce the damage.

Summary. Welding burns belong to arc burns and belong to the category of burns. If the face is itchy and painful, first of all, try to avoid receiving burns again, and secondly, you can use **burn ointment such as Jingwan infrared rub**; Try to protect** from breakage to avoid infection.

Antibiotics should be taken routinely if they break.

Welding burns belong to arc burns and belong to the category of burns. If the face is itchy and painful, first of all, try to avoid receiving burns again, and secondly, you can use **burn ointment such as Jingwan infrared rub**; Try to protect** from breakage to avoid infection. Antibiotics should be taken routinely if they break.

My left chin is swollen and my mouth hurts when I eat.

I want to go to the hospital to have a look, can I take a CT scan to find out what is wrong?

Then rub the medicine regularly for a few days, and the pain and itching will be reduced.

If rubbing does not reduce pain, it is advisable to go to the hospital**.

Answer:

Apply a good quality aloe vera gel immediately, preferably with a moisturizing lotion before applying aloe vera gel. Here's why:

First: The epidermal layer, especially the stratum corneum, which was burned by welding, was seriously damaged and must be repaired by the vertical wheel.

Second: .High-quality aloe vera gel, cool and lubricating, can give the skin sufficient moisture and nutrition, simulate the structure of the human body's first stratum corneum, soothe and repair the skin burned by electric welding, promote skin metabolism, and enhance the barrier function of the stratum corneum of the skin.

Third: In order to promote the skin burned by welding to better absorb the nutrients of aloe vera gel, it must be equipped with moisturizing and softening lotion to fill skin cells with moisture, activate the function of cell metabolism, and promote the early repair and renewal of skin burned by welding.

Fourth: high-quality aloe vera gel can also be used as a no-wash**, (the dosage is three times the amount of daily application), which can give the most urgent and concentrated safety repair to the skin burned by electric welding, and promote early healing.

It is recommended to apply it every morning and evening, when using it as a no-wash**, the best wax is also patted with water first, and then apply a little more aloe vera gel, 2 3 times a week, about 20 minutes each time. Stick to it for a while.

After welding, you can use a towel moistened with cold water and apply it to your face to relieve the pain in your face.

Precautions for electric welding:

1. It is easy to cause electric shock accidents.

In the welding process, because the welder has to frequently replace the welding rod and adjust the welding current, the operation should be in direct contact with the electrode and plate, and the welding power supply is usually 220V 380V, when the electrical safety protection device is faulty, the labor protection equipment is unqualified, and the operator is operating in violation of regulations, it may cause an electric shock accident. The risk of electric shock is greater if welded inside a metal container, on a pipeline, or in a wet place.

2. It is easy to cause **disaster** accidents.

Due to the arc or open flame generated during the welding process, it is very easy to cause fire when working in places with flammable materials. Especially in the area of flammable and explosive devices (including pits, trenches, troughs, etc.), the danger is greater when welding on containers, towers, tanks and pipelines where flammable and explosive media have been stored.

The face hurts because it is irradiated by the arc light, don't play with your mobile phone and don't touch the computer when you get home, otherwise it will be more uncomfortable, the easiest way is to wet a towel with cold water and apply it to your face.

You can tie a cool towel to your face after work to lighten it up.

It is better to make a convenient welding helmet yourself, the reflective burns are the most severe, it is better to use ice water, comfortable.

The pain in the face after welding is a burn caused by arc radiation caused by insufficient protection, and it is recommended to go to the hospital immediately.

The process of argon arc welding will produce high-frequency electromagnetic fields and click radioactivity, which can cause arc light damage much stronger than arc welding, and have certain damage to the eyes and eyes, so it is recommended to do a good job of protection.

Safety precautions:

1) Ventilation measures The TIG welding work site should have a good ventilation device to discharge harmful gases and smoke. In addition to the ventilation of the plant, several axial fans can be installed to exhaust air in places where the welding workload is large and the welding machines are concentrated.

In addition, local ventilation measures can also be used to extract harmful gases around the arc, such as the use of open arc smoke exhaust hoods, smoke exhaust welding guns, light small fans, etc.

2) Protective radiation measures: Use cerium tungsten electrodes with very low radiation dose as much as possible. When thorium tungsten electrode and cerium tungsten electrode are processed, sealed or exhaust grinding wheels should be used, and the operator should wear masks, gloves and other personal protective equipment, and wash hands and faces after processing. Thorium tungsten electrode and cerium tungsten electrode should be stored in an aluminum box.

3) Measures to protect against high frequencies.

In order to prevent and weaken the effects of high-frequency electromagnetic fields, the following measures have been taken:

1) The workpiece is well grounded, and the welding torch cable and ground wire should be shielded with metal braided wire;

2) reduce the frequency appropriately;

3) Try not to use high-frequency oscillator as an arc stabilization device to reduce the high-frequency electric action time.

4) Other personal protective measures.

During argon arc welding, due to the strong action of ozone and ultraviolet rays, it is advisable to wear non-cotton overalls (such as acid-resistant tweed, tussah silk, etc.). In the case of welding in the container and local ventilation cannot be used, personal protective measures such as air helmets, air masks or gas masks can be used.

The light hurts, there's no problem, don't worry, it's just a little painful, novices are like this.

If you are burned by strong light radiation, your skin will peel! Suggestion: Eat more fruits that contain vitamin C, or take some anti-inflammatory drugs (see your doctor).

1. Welding flash eye pain is electro-optic ophthalmia.

Electro-optic ophthalmia is an acute inflammation caused by the absorption of large amounts of ultraviolet rays by the corneal epithelial cells and conjunctiva of the eye.

The incubation period of electro-optic ophthalmia is 6-8 hours, and the eyes suddenly burn and suffer severe pain, accompanied by photophobia, tearing, eye and face spasms, headache, eyelid and facial ** flushing and burning sensation, conjunctival hyperemia and edema in the eye cleft, and tearing at the sight of light is very uncomfortable.

Second, more effective and simple coping methods:

1. Put a warm and wet towel on the eye area for a cold compress, and then change the cold towel after the towel is hot

2. If there are more effective eye drops with milk, 3-5 drops per sick eye, do not open your eyes immediately after dropping milk, close your eyes for 3-5 minutes, and drop them every 2 hours. Soon the pain in the eyes will be relieved;

3. Chloramphenicol eye drops, erythromycin eye ointment and other eye drops are used locally to prevent infection.

4. Colored glasses should be worn during the period. Most patients recover within 1-3 days after the onset of the disease, and generally do not cause permanent damage, but do not be injured by ultraviolet rays multiple times or for a long time, so as not to cause chronic blepharitis.

3. Prevention of electro-optic ophthalmia.

Welders should abide by the operating procedures, and the operators should cooperate with their work and wear protective masks.

Finding a breastfeeding woman to put human milk in her glasses works very well.

It is said that washing with milk is effective.