What should I pay attention to when driving at night? Drive during the day

When driving in the city, there are generally street lights, which is not a big problem. However, driving on some roads with no or few street lights can be very tiring, and here are some ways to deal with it:

1. You can use high beams when driving, change to low beams 100 meters before the vehicle rendezvous, and then use high beams later.

Second, there are yellow or white lane lines on the general road, and when driving at night, pay more attention to the lane lines in front of you, which will be easier.

3. When you meet the car, you don't need to pay attention to the oncoming car, you still look at the lane line in front of you, as long as you drive in your own lane, just slow down appropriately. Generally, drivers will turn on the low beams when they will car, which will not be very dazzling, of course, there are some novices who do not understand the use of high beams and low beams, and there are also those who have been using high beams, and there are some unreasonable drivers who will always use high beams, which can only further slow down and wait for him to pass. You just have to pay attention to the road in front of you, don't worry.

Fourth, it is more troublesome on rainy days, and the rain on the road will reflect the light, and the lane lines cannot be seen clearly. At this time, it is best to follow the car, and it is easier to follow the vehicle in front of you with the low beam on, and the distance between the cars is not too far. If you don't have a car to follow, you can only drive slower, and there will always be some people with good driving skills who will overtake you, and then you can follow the car again.

In addition, at night, the road surface after rain is generally gray-black, and the bumps, mud ponds, and potholes are black, and the stagnant water is white.

If you have any driving problems, go to Zhongyue.com to see...

There is nothing good or bad, anyway, driving will definitely cost fuel, and it will definitely cause pollution to the atmosphere.

If you drive at night, you should pay attention to the deterioration of your vision due to light problems, pay attention to maintaining the speed and distance between the vehicles, use the lights reasonably, and do not use the high beams when you meet the car and the car in front of you. Before changing lanes or turning, be sure to turn on your turn signals in advance, and confirm your safety through the rearview mirror and turning your head before changing lanes or turning.

What to pay attention to hahahaha Pay attention to safety If you are a novice, pay attention to turn on the lights!! In fact, driving at night and seeing the road during the day. The car has no lights.

<><1. Concentrate and concentrate on driving

Driving is not child's play, and both veterans and novices should concentrate on driving. The night light is dim, and the driving is full of uncertainty. All car owners should be attentive and concentrated.

Even if you have a good friend or family member in the car, don't forget to talk to them. An overly engaged discussion can distract the owner from fully aware of the condition of the vehicle and exacerbate the driving hazards.

2. Use car lights correctly and do not be a "high beam dog".

It is natural to turn on the lights at night, but unfortunately, some car owners lack the common sense of light operation and always use the wrong lights, which affects the normal driving of other vehicles. The most common behavior is to turn on the high beams when the two cars meet, and this kind of driving car will be called "high beam dog". Actually, the right thing to do is to convert the high beams to the low beams.

3. Control the speed of the car, don't drive fast

Late at night, traffic decreases significantly. Faced with an open road, some car owners will raise their "racing dream" and slam on the accelerator to accelerate. In fact, this is not the right practice, and too fast can increase the probability of accidents.

All car owners must keep in mind that you must control your speed and don't drive fast.

4. Be bold and careful, and pay attention to details

It is indeed more difficult to drive at night than to drive during the day. However, car owners can not escape, must be bold and careful, dare to drive and pay attention to details, socks to avoid small losses. If you can't drive alone, you can invite an old driver to accompany you.

In this way, most of the tension in my heart will be dispelled.

5. Keep the distance between vehicles and be cautious about driving

Keeping the distance between cars is an old topic. Whether driving during the day or at night, the owner should keep a safe distance from the vehicle in front. At night, the following distance can also be appropriately increased, so as to better ensure their own safety. In addition, it is important to be cautious and rigorous when driving.

6. Be careful when passing through the intersection to avoid colliding with other vehicles or pedestrians

The intersection is an accident-prone location, so all car owners must be mindful. Be sure to observe a lot before passing through the intersection and slow down appropriately to avoid it. If you notice a pedestrian or other vehicle, don't rush until all of them have passed, and proceed cautiously through the intersection.

7. Give way to pedestrians and be a civilized driver

When driving on the road, you will encounter pedestrians in addition to other vehicles. When encountering pedestrians, all car owners must be courteous and give way to pedestrians first.

Here are some things to keep in mind when driving at night:

1. Check the lights.

When traveling at night, the lights play a vital role in ensuring driving safety, and they must not be sloppy, so be sure to confirm that the lights are not abnormal before traveling.

2. Facing the high beam, politely meet the car.

Driving at night, in the poorly lit road section usually turn on the high beam to make the vision clearer, of course, sometimes forget to turn off the high beam, encounter this situation, use the high beam to shake a reminder of the other party, the owner of the car who has no intention of opening the high beam will usually take the initiative to turn off, if you touch the love to open the high beam, you must not be vindictive, take the initiative to reduce the low speed of the eggplant, observe the distance on the right side of the road, appropriate avoidance, do not gamble with strong light, so as not to cause accidents.

3. Control the speed.

Night driving is usually less traffic, pedestrians and bicycles interfere less, at this time many car owners will speed up, but ignore the night driving from the light to the dark, the eyes need to tremble a short adaptation time, if the speed is too fast, the probability of traffic accidents will also increase, by which it is through curves, slopes, narrow roads and other road sections, be sure to reduce the speed, alternate use of far and near light to remind vehicles and pedestrians on both sides.

4. Try to overtake as little as possible.

When driving at night, due to poor line of sight, the judgment of road conditions is inaccurate, try to maintain a constant speed and reduce the frequency of overtaking. When overtaking, you need to alternate between high and low beams to inform the car in front that after determining that the car in front is allowed to overtake, scan the left and right rearview mirrors with residual light to confirm safety before overtaking.

Here's how to check the owner of the license plate number:1. You can dial "114" for inquiries.

3. Find an insurance company, know the license plate number and want to query the name of the car owner, you can go to the insurance company with valid documents, and you can apply to query the name of the car owner according to the other party's license plate number.

Generally, the first two methods are used, because insurance companies are reluctant to disclose the personal information of car owners for the sake of privacy.

Always turn on your headlights when driving at night.

Most drivers know that driving at night is to turn on the lights, but there are still some drivers who do not develop this good habit and drive on the road without driving the lights, of course, some people may think that they can see the road clearly without turning on the lights, in fact, we should know that the lights are to let others see us clearly, so as to avoid traffic accidents.

Please click Enter a description.

Don't get too close to the car at night.

Compared with daytime, we must be farther away from the car than during the day, and we must keep a safe distance. The safety distance of the vehicle is not static, but to be flexibly grasped according to the speed of the vehicle, in short, the distance from the car must be at least 50 meters to be considered safe.

Please click Enter a description.

Try not to choose to overtake.

When driving at night, try not to overtake often, or try not to exceed when you can not overtake, because the sight of the vehicle at night is not good, so the vehicle lane change will often increase the probability of an accident in the vehicle, if you must overtake, you must see clearly.

Please click Enter a description.

Slow down when passing through the intersection.

What should I pay attention to when driving at night? When driving at night, we should grasp the speed according to the road conditions, when we drive to intersections, residential areas and other places, vehicles or pedestrians may suddenly appear, so we must pay more attention and try to reduce the speed to prevent danger.

Please click Enter a description.

Don't drive tired.

Before driving at night, be sure to take a break and be mentally healthy before driving on the road. Be sure not to have a fluke mentality, it is easy to nap and sleepy at night, and the energy will be worse than during the day, and if you choose to drive fatigue, it will easily lead to traffic accidents.

Use the lights correctly when meeting the car.

Many accidents occur when the opposite car meets the car, because, if we turn on the high beams, or the other party turns on the high beams, at the moment of meeting, our own or the other party's vision is flashed by the strong light, and it is easy to lose the ability to see for a short time, resulting in accidents. Therefore, it is important to switch the low beam of the vehicle.

Pay attention to the warning signs ahead.

It is important to pay extra attention to the situation ahead to prevent unnecessary danger from occurring. For example, if the road ahead is being repaired, or if there is an accident just ahead, at this time, there will be some warning signs, we must take measures in advance, predict in advance, and never ignore these signs to avoid tragedy.

end precautions.

Precautions for driving at night. What should I pay attention to when driving at night? **From the web.

Recently, it has been getting dark earlier and earlier, and it is not yet half past five, and it is already dark outside

The little friends who drive home should not only pay attention to the pedestrians who are "hidden" in the dark, but also always beware of the strong light from the opposite "high beam dog", which can be described as "thrilling and abnormal" on the way home

Next, Xiaobin will talk to you about the precautions for driving at night, I hope it can help you.

In the face of high beams, you can do this.

Driving at night, Xiaobin's most annoying thing is the driver who uses the high beam indiscriminately in the opposite lane (high beam dog).

In the face of this situation, we can first shake it with the high beam, if the other party is unintentional or forgot to turn on the high beam, most of them will turn it off by themselves;

If you encounter a very unreasonable high beam dog, then don't be vindictive, take the initiative to reduce the speed of the car, continue to move forward according to the route in your memory, and don't get too close to the side of the road to avoid scratching.

When meeting with the oncoming vehicle, Xiaobin sometimes uses the other party's high beam to observe the road conditions in front of him in advance, whether there are obstacles, potholes, etc., so as to prepare in advance.

Pass through the intersection Watch out for pedestrians and vehicles.

When passing through the intersection at night, especially if the traffic flow is not large, you should reduce the speed of the vehicle, and then alternate the high and low beams, which can not only allow you to observe whether there are vehicles and pedestrians at the intersection in advance, but also remind the vehicles on the other side that are about to enter the intersection "You drive slower, I have a car here".

When passing through a traffic light intersection, even if it's green, reduce your speed! The probability of pedestrians running red lights at night is not low, and slowing down can effectively avoid accidents.

**Color: Distinguish whether it is a road surface or not.

This is more like walking at night and observing puddles: the reflective ones have water, and the non-reflective ones have no water.

On roads without street lights, you can also judge the road surface condition based on this. The road surface will be gray when illuminated by the headlights;

On both sides of the road or on the road surface, there are large potholes on the road that cannot be illuminated, it is black, as long as you remember to "go gray and not black".

The first note: lighting.

When driving at night, you should pay attention to whether the lights are normal, how can you ensure driving safety if you can't see the road clearly? So be sure to check if the lighting equipment is good. Otherwise, it will be embarrassing to find that there is no light on the road, and it is not easy to repair, and the risk factor of going on the road will increase a lot!

The other is the use of the distance, the high beam dog is a type of driver that we hate very much, so we must pay attention to turn off the high beam when we will drive, so it is also for everyone's safety. If you find that the other person has not turned off the high beams, don't get angry, look at the car slowly, and don't let the light reflect your driving.

Second note: Pay attention to the intersection.

When passing through crowded places or intersections, pay attention to slow down the speed, the lights may not be able to see pedestrians, so it is easy to have accidents, so you must pay attention to whether there are people at the intersection, otherwise it will not be good to hit pedestrians if you are not fast enough, so slow down!

The third note: the distance between the vehicles.

Drivers are also tired at night, and although you may be fine, there is no guarantee that the drivers in front of and behind you are in good spirits. Therefore, pay attention to the distance between the front and rear cars, and do not get too close, otherwise there will be any emergency braking situation, and there may be an accident. Especially in the face of large trucks, large trucks, and vehicles loaded with flammable and explosive materials, keep a safe distance!

Fourth note: rest.

It is not advisable to drive too long at night, people are not machines after all, they will feel tired, what Red Bull coffee to drink, smoking is not to ensure that you always keep your spirits, so you must pay attention to rest, too tired to find a place to stop and rest, do not be reckless and lead to fatigue driving, accidents outweigh the losses!

a) Start.

The starting mode of the car needs to be combined with the characteristics of the engine, and according to the temperature at the time of starting and the temperature of the engine. It's not the same.

1) For EFI gasoline engines, the starting operation is relatively simple and does not require stepping on the accelerator. Because the opening of the throttle valve, the fuel supply and the concentrated mixture are automatically controlled by the EFI system when the engine starts.

2) Warm up the start: Under normal circumstances, when starting the engine at a low temperature, it should be warmed up for a while after starting, so that the oil can reach the lubrication points, so as to reduce engine wear.

b) Vehicle speed control.

1) The higher the speed, the greater the power and utilization, and the smaller the unit consumption of fuel. As a result, the fuel consumption of the car is higher at low speeds than in hail noise. However, when the speed is too high, the fuel consumption is also very large, and when the minimum engine speed is exceeded, the fuel consumption increases with the increase of the vehicle speed.

When the speed exceeds a certain value, the fuel consumption increases quickly, so too high or too low is not conducive to fuel saving.

2) In order to master the economic speed in driving, the driver should learn to use the engine tachometer and speedometer to increase or decrease the opening of the throttle appropriately to ensure the economy of the vehicle.

3) Try to avoid sudden acceleration of the moving vehicle. Sudden acceleration can greatly increase fuel consumption.

4) Minimize unnecessary braking as much as possible. When driving, you should pay attention to roadblocks, which can slide instead of brakes to reduce fuel consumption.

5) Proper use of the cruise system. Some cars are equipped with cruise control devices, and when driving on better road surfaces and uncomplicated road sections, cruise control devices should be used to stabilize the speed at the economic speed, and the fuel-saving effect is the best.

6) Rational use of air conditioning and refrigeration system. When the speed is less than 60-85 km/h, the air conditioning and refrigeration system can be turned off according to the situation, and the windows are opened for ventilation; However, when the speed is higher than 60-85 kilometers per hour, the air conditioning should be fully utilized, because the fuel consumed by opening the window to increase the wind resistance at high speed is more than the fuel consumed by the air conditioning and refrigeration system.

6) Keep the body tidy. Reduce the weight of the body and clean up unnecessary items on the car in time to reduce the weight.

c) Minimize the idling of the engine.

2) Before driving on the road early in the morning, especially before a cold car hits the road, a moderate warm-up is absolutely necessary. Generally speaking, you only need to wait until the water temperature indicator rises slightly and the engine speed is stable before you can go on the road, then drive at a lower speed for a few minutes, and then wait until the water temperature reaches the specified point before you can drive in the normal way. However, some drivers habitually leave the engine idling when they stop for a short period of time.

This not only pollutes the air, but also increases fuel consumption.