How to solve the Apple screen disconnection, and the steps to solve the Apple mobile phone disconnec

The screen disconnection problem can be solved from the following 4 aspects.

Upgrade to a new version or stay in a more stable version.

Take iOS 13

For example, in the early beta releases, there were often broken touches, which simply means that in multiple touches, there may be a few invalid situations.

Therefore, in order to solve this problem, it is important to upgrade to a new version or a relatively mature version in time, and when there is a problem with the touch, you can first check whether it is caused by the system.

Keep the screen and film clean.

Capacitive touch screen.

The iPhone screen is a four-layer composite glass screen, the inner surface and the interlayer of the glass screen are each coated with a layer of ITO, the outer layer is a thin layer of silica glass protective layer, and the interlayer ITO coating is used as the working surface.

If there is a stain on the surface of the screen, it will affect the sensitivity of the finger to attract the current inside the screen, keep the screen clean, do not get liquids, and do not apply too thick a protective film, which can also eliminate touch.

Avoid overheating the device.

When the iPhone overheats, the CPU will automatically downclock, which will cause the device to run slowly, in which case there will be a feeling of lag in controlling the screen, which is not a problem with the screen touch, but just a slowing down of the device.

In this case, it is recommended to cool down the device and restart it before using it.

Some models have screen defects.

Take iPhone X

For example, some iPhone X displays may have touch issues because a component on the display module may malfunction.

Affected devices may exhibit the following symptoms:

The display or part of the display does not respond or intermittently responds to touch actions;

The display reacts even when no touch is being used;

For these models, Apple and its authorized service providers will replace the display module free of charge for eligible devices.

However, if the screen is fine, there is no problem in all aspects, it may be a problem with the motherboard and other hardware, just contact Apple after-sales for processing.

The methods have been told to you, so let's check them out if you have any questions.

What is the reason for the iPhoneX screen touch failure and stuttering?

Apple says that iOS devices should be used in temperatures ranging from 0 to 35 degrees Celsius, however, the ambient temperature did not reach below zero when the above issue occurred. In this regard, Apple released a message saying that this situation mainly occurs when the ambient temperature drops suddenly, and the iPhone X will not be able to respond to the user's actions, but it will return to normal use after a few seconds. Apple released iOS today, and it is expected that iOS will be pushed by the end of this year, when this frozen screen bug is also expected to be resolved.

How to solve iPhoneX touch failure and stuck?

Apple has officially confirmed the existence of the problem for the first time, and announced that it will fix it through subsequent software updates. From this, this should not be a hardware issue with the iPhone X.

This issue will be fixed in a future system update, so it should not be a hardware issue.

Apple has released the official version of iOS, which includes input autocorrect and Siri's important software bug fixes. iOS is currently in beta and will be released to iPhone and iPad users by the end of the year, and the frozen screen issue is expected to be resolved in the official version of iOS.

Method. 1. Solve the problem by shutting down and restarting.

When the touch screen of iPhone6S fails and there is no response after clicking, you can press the [Power] button of the phone first.

When the Shutdown slider option appears on the screen, slide Power Off. Wait for the shutdown to be successful, and then press the power button to turn on the power and see if it can solve the problem.

Method. Second, solve the problem by forcing a restart.

When the iPhone touch screen is out of order, it is possible that pressing the Home and Power buttons on your iPhone alone at this time still doesn't respond. If you encounter such a problem, please press the [Home + Power] buttons at the same time.

Until the white Apple logo appears on the screen, it means that the current iPhone has been forced to restart, let go and wait for the system to boot up, and then it can be used normally.

If you encounter a serious sudden problem, and even pressing the [Power + Home Screen] button at the same time does not work, please connect the charger to your iPhone first.

Next, press the [Power + Home Screen] button again and force restart your iPhone.

Method Steps:

1.Avoid overheating the device. When using more Apple, the phone will be very hot, and the CPU will automatically reduce the frequency at this time, which will cause the device to run slowly, and in this case, the control screen will often give people a feeling of "delay". It's not a screen.

2.Keep the screen and film clean. The capacitive touch screen uses the current induction of the human body to work, iPhone...

3.Upgrade to the latest or more stable version; Take the latest iOS 13 as an example, in the early few betas...

4.defective screen of the model; Because a component on the display module may fail, some of the display may go out.

Workaround for screen disconnection:

General method 1: If the screen drifts, if conditions permit, you can consider blowing the screen with a hot hair dryer that usually blows your hair, turn it on to the middle range, and blow the screen evenly when the phone is turned off, just feel that the screen is hot, and turn it back on.

General method 2: If it is affected by the magnetic field, then stay away from the magnetic field or degaussing treatment, if it is the influence of static electricity sweat and oil, the human body may appear static sweat and oil stains in specific circumstances, and should be actively cleaned and protected. If it is a dead or fake freeze, this problem can be solved after turning off the screen or restarting the phone.

General method 3: electric shock method, use the electrostatic electrostatic in the lighter to shock the screen (with a paper towel stained with water to cover the failure of the shock), change the electric field, this method has certain risks, use with caution.

General method 4: If the screen failure of the mobile phone occurs in the charging state, this problem is generally caused by the voltage instability, or it may be due to the use of a non-original data cable or power adapter.

on charge. We can first change to an environment with a relatively stable voltage to charge the phone.

General method five: lose money.

1. Use transparent glue to paste and tear at the malfunction.

2. Repeat the above actions until the screen is touched.

If you can't troubleshoot the problem through the above, you will have to restore it to factory settings.

If the situation still exists, then you have to try to re-flash the phone, but if it doesn't work, then you can only change the screen.

If the mobile phone screen is broken, it is generally the inner screen of the mobile phone is broken, the current smart phone screen is getting thinner and thinner, the touch screen of the mobile phone has been integrated into the inner screen, the outer screen is just a layer of ordinary tempered glass, the main role is to protect the inner screen of the mobile phone, so the mobile phone screen is broken or ineffective, which is generally a problem with the inner screen.

The main reason for the disconnection of the mobile phone is generally that the mobile phone has fallen or entered the water, resulting in the disconnection or corrosion of the touch layer, which needs to be solved, and the screen can only be replaced. At present, there are two maintenance methods for the maintenance industry for screen disconnection (screen display is normal):

1. Re-press the touch cable: If the mobile phone screen is not broken, the screen display is normal, and the outer screen is intact, in this case, the screen is not touchable and the touch is broken, which can generally be solved by re-welding the touch cable by a professional pressure machine.

2. Replace the touch screen: If the screen has been pressed and drained, then the entire touch screen can only be replaced (commonly known as TP in the industry), and the replacement of the touch screen requires a professional maintenance master to operate, and the general repair shop or official after-sales service can not be repaired separately.

1. What's going on with the Apple mobile phone screen malfunctioning and jumping around, the touch screen is broken (for example, it encounters a greasy or magnetic field environment). Second, the motherboard leaks. Third, the battery is aging and damaged.

Generally speaking, the third option has the highest possibility, and choosing to replace the battery problem can solve the iPhone jumping around. 2. How to solve the iphone5s touch screen failure and jumping around: 1. When the user is using the mobile phone, if the screen fails to function, the user can press and hold the home button in the lock screen state and then enable the voice control function.

The town file then says "****" at this time, the player can choose the ** song, and then select the touch function to resume. We can wait a while and then we can see that the touch screen issue is fixed. 2. Users can also wait for the phone to run out of power, and the phone will enter the state of automatic shutdown.

At this time, the user can charge the phone, and then after turning it on, they can resume the operation of the touch screen hidden travel. 3. Users can connect their iPhone5s with iTunes, and then you can upgrade your iPhone5s to the latest version of iOS. (Jailbroken users need to note that iOS version upgrade cannot be carried out directly on iTunes) 4. Users can also choose to double-click the home button, and then we will exit all programs running in the background, which is also a way to solve the screen failure.

5. Users can press and hold the power button of the stove game mobile phone, and then press and hold the home button, so that they can return to the home screen. This is also one way to fix the screen malfunctioning.

Dear, hello, I'm glad to answer for you: How to solve the Apple screen disconnection Answer: Good afternoon, dear <>

Causes and solutions for Apple screen disconnection: 1. Static electricity causes the screen to temporarily fail The screen is particularly prone to static electricity problems in winter, when you have not applied the iPhone for a long time and placed it for a period of time, and when you first turn it on, you find that the screen is not very sensitive, it may be caused by static electricity. You can hold your iPhone in one hand and stick it to the wall or belt with the other.

The stupid god can also wipe the screen three times with the palm of his hand, which can remove static electricity, and the lock screen can be used normally when it is turned on again. 2. The system is stuck or the software conflict causes the failure The system card owner or the crash, you can force restart the phone. Force Restart Method:

Press and hold the home button and the power button at the same time, and wait until the Apple logo appears again when the phone is turned off, and you can release your hands, while the forced restart of the iPhone 7 is to press and hold the power button and the volume down button. 3. Failure caused by touch IC failure This problem mostly occurs in iPhone 6 Plus models, so how to tell if the touch IC is faulty? Press and hold the part under the earpiece with your hand, and squeeze the screen for a while, and then put the iPhone in the palm of your hand and pat it, if it is a touch IC failure, then the touch screen will not work after the above operation, and it can be basically determined that the touch IC is a problem and not the screen.

Fourth, the screen cable is loose and damaged or the inner screen is faulty If you have tried the above methods and it is useless, then it can be judged that the screen itself is faulty, if the screen cable is loose, you need to re-buckle the cable, and if the re-buckle cable is not used, you can only replace the entire mobile phone screen. <>

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. You can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

How to solve the broken touch of the Apple screen 1, the touch caused by the steel Qiaoying film is not effective, replace the Liqing tempered film. 2. Restart the phone, press and hold the volume plus button to let go, then press and hold the volume down key to let go, and finally press and hold the power button until the Apple logo appears. 3. If the system is caused by a conflict between the program and the program, click to uninstall the software.

4. If there is a problem of filial piety in the hardware of the mobile phone, you need to find a professional after-sales service to solve it.

The solution for the iPhone to detect the touch is:

1. If the touch caused by the tempered film is not effective, replace the tempered film.

2. Restart the phone, press and hold the volume plus key to release the hungry hand, then press and hold the volume down button to let go, and finally press and hold the power button until the Apple logo appears.

3. If the system is caused by a conflict between the program and the program, click to uninstall the software.

4. If there is a problem with the hardware of the mobile phone, you need to find a professional after-sales service to solve it.

Apple iPhone is a series of smartphones developed and sold by Apple, equipped with Apple's self-developed iOS mobile operating system, the first generation of iPhone was released on January 9, 2007. The multi-touch technology and user-friendly interface of Apple's iPhone have had a profound impact on smartphone designs from other manufacturers. Time magazine in the United States called it "the invention of the year in 2007".

In 2004, Apple gathered more than 1,000 in-house employees to develop the iPhone and began a highly classified project called "ProjectPurple", which included Jonathanive, the designer behind the iPhone.