Class 1 Constructor Registration Certificate, what information is required for the replacement of lo

First Class Constructor.

Registration certificate, information required for replacement of lost practice seal: "Registration Certificate of Class 1 Registered Constructor, Application Form for Replacement or Defaced Replacement of Lost Practice Seal", and a copy of the identity certificate; The original statement of loss published in a newspaper at or above the provincial level. It is recommended to choose Youlu Education when applying for the examination.

Yijian registration management:

1. Obtain the qualification of construction engineer.

Certified personnel must be registered before they can practice as a constructor.

Second, the registration of the professional qualification of a constructor shall be applied for by the person, and shall be submitted to the Ministry of Construction or its authorized institutions for registration after passing the preliminary examination by the construction administrative departments of the provinces, autonomous regions and municipalities directly under the Central Government or its authorized institutions.

3. The person applying for registration must meet the following conditions at the same time:

1. Obtain the construction engineer qualification certificate;

2. No criminal record;

3. Be in good health and be able to work in the position of constructor;

4. Pass the assessment of the unit.

If you want to know more about Yijian, it is recommended to consult Youlu Education. Teachers are an important cornerstone to support the steady development of an education and training institution. As a vocational training institution, Youlu Education also attaches great importance to the construction and training of the teaching team, and more than ten years of vocational education services have left a deep impression in the hearts of many students, and the students will also give positive feedback to Youlu Education after class.

First, publish the loss statement, and then do this:

Step 1: Fill in the personal version: 1. Log in to China Constructor**, click on the first-level constructor registration system, click on the personal version login entrance, and fill in the "Registered Constructor Change, Addition, Cancellation, etc. login entrance" on the right side of the page

Name, ID number, qualification certificate number, password, etc., click to log in. Note: Please fill in the name and ID number with the information at the time of initial registration, and you can check the information in the "Registered Personnel" information of the enterprise version.

The original password is 7 zeros. 2. After logging in, click the "Lost Replacement" option in the left directory tree, and fill in the relevant information under the "Save" button.

Step 2: Enterprise Edition operation 1, log in to the Enterprise Edition (dongle is required, it should be in the hands of someone in your unit, the person in charge of the registration and declaration of the construction engineer), click "Lost Replacement" in the directory tree, and the personnel who have been saved successfully will be displayed, click "Review" behind the personnel information, click "Save" after verifying that it is correct, and click "Report" in the small box in front of the personnel information. 2. Printing:

After the personnel report, select the reported in the drop-down box of the declaration status, and the information of the personnel who have been successfully reported will be displayed, click on the view behind the personnel, and pop up the registration certificate of the first-class registered constructor, the application form for the replacement or defacement of the lost practice seal (7-1), and print it. Then send the application form, the statement of loss, the original copy of the personal ID card, the scanned copy of the builder's certificate and the B certificate to the provincial housing and urban-rural development department (committee) government affairs center for processing.

If a registered first-class constructor loses his registration certificate and practice seal, he or she shall apply to the provincial construction department for reissuance and submit the following materials:

1. Application Form for Replacement or Defaced Replacement of Lost or Defaced Registration Certificate of Class 1 Registered Constructor and Practice Seal (printed after successful online declaration);

2. Original identity certificate (returned after verification) and photocopy;

3. The original statement of loss published in newspapers at or above the provincial level.

4. Three recent one-inch bareheaded sheets of the same version of the declarant (two of which are posted on the application form, and the other is pasted on the attached table 2** paper with the name and unit written on the back).

However, specific to the construction department of each province or the local construction bureau, the requirements will be different, and the requirements of the local housing and urban-rural development department will be the main one.

If a registered constructor loses his registration certificate or practice seal, he or she shall apply to the provincial construction department for reissuance and submit the following materials:

1) Application Form for Replacement or Defaced Replacement of Lost or Defaced Registration Certificate and Practice Seal of Class 1 Registered Constructor

2) A copy of the identity certificate;

3) The original statement of loss published in a newspaper at or above the provincial level.

The provincial-level construction department shall inspect the completeness of the registration applicant's materials in accordance with the relevant provisions on initial registration, renewal of registration, change of registration, additional registration, re-registration, replacement of lost items, replacement of defaced items and cancellation of registration. Where there are errors in the application materials that can be corrected on the spot, the applicant shall be allowed to correct them on the spot.

Application materials required for registered first-class constructor:

1. The initial registration application form should be automatically generated and printed after the successful declaration on the first-class construction engineer registration management system, and any application form that is not printed through the system cannot be reported.

2. The qualification certificate should be copied on an A4 paper with numbered pages and photo pages: the new ID card should be copied on a piece of A4 paper: the labor contract should be in the standard contract of the labor department, and the content should be standardized, in which the employment period shall not be less than one year in principle from the date of declaration and registration, and a simple employment agreement cannot be used.

3, the municipal construction administrative departments to carefully verify whether the original and the copy is consistent, consistent with the copy to stamp the copy "consistent with the original" seal.

4. The municipal construction administrative department can enter the management system through the municipal management lock and see the information of the personnel and enterprises reported in the region. Online materials and written materials should be unified, and both are indispensable.

The applicant shall apply to the original registration authority for a replacement with the proof of the loss declaration published on the public **.

Procedure:

Fill in** and apply at the test center with relevant documents.

Loss Declaration Mode (Newspaper):

Name Taken Annual Examination Result Passed, Certificate Number The certificate has been lost and declared invalid.

Candidates who have lost their certificates can log on to the China Education Examination Network to apply for a replacement certificate.

Procedures for the declaration of replacement or replacement of loss or defacement of Class II registered constructors.

1.Application: 1) Individuals log in to the Provincial Construction Qualification Registration and Continuing Education Management System to declare, and report to the enterprise in the system.

2) Enterprises log in to the provincial construction qualification registration and continuing education management system to declare, report to the competent departments of each city in the system and print the application form.

2.Acceptance: Individuals or enterprises submit paper written materials and relevant originals to the competent departments of each city, and the competent departments of each city shall review the application materials, check the originals, and if the materials are complete, accept the materials and return the original documents such as ID cards; If the materials are incomplete, the materials need to be supplemented and corrected at one time.

3.Processing progress inquiry:

After the applicant submits the registration application, he can check the status of the business declaration through the "Provincial Construction Practice Qualification Registration and Continuing Education Management System", and the status can be displayed as: prefectural and municipal review, prefecture and city rejection, provincial review, provincial approval, provincial rejection, etc.

4.Get an approval decision:

Individuals or enterprises can check the status of "Provincial Approval" in the "Provincial Construction Practice Qualification Registration and Continuing Education Management System".

After the registration of the constructor certificate is completed, the practice qualification certificate and seal shall be kept and used by the registered constructor himself.

According to the "Regulations on the Administration of Registered Constructors":

Article 10 The registration certificate and practice seal are the practice certificates of the registered builder, which shall be kept and used by the registered builder himself.

The registration certificate and practice seal are valid for 3 years.

The registration certificate of the first-class registered constructor shall be uniformly printed by the competent department of construction, and the practice seal shall be uniformly styled by the competent department of construction, and the construction department of the province, the autonomous region and the municipality directly under the Central Government shall be organized and produced.

The process of reissuing the lost certificate of the first-class constructor, the business handling process:

1. Acceptance and preliminary examination: the main body is the district (county) housing and construction committee.

Preliminary examination materials: 1) "Application Form for Replacement of Lost First-Class Constructor".

2) A copy of the applicant's ID card.

3) Original and photocopy of the newspaper loss statement.

Preliminary examination criteria: 1Submit online information; 2.whether the photocopy is consistent with the original; 3.Whether each page of the copy is stamped with the official seal of the enterprise.

Time limit for preliminary examination: 5 working days.

2. Review: The main body is the personnel qualification window of the administrative comprehensive service hall of the Municipal Housing and Urban-Rural Development Commission.

Review materials: 1) Application Form for Replacement of Lost First-Class Constructor.

2) A copy of the applicant's ID card.

3) The original and photocopy of the newspaper in which the statement of loss was published.

Time to complete: 5 working days.

3. After passing the review of the certificate system, the application materials shall be transferred to the registration center of the Municipal Housing and Urban-Rural Development Commission for summary, and the list of qualified personnel for the loss of the reissue will be transferred to the administrative comprehensive service hall for certificate making. If the seal is lost, the seal data is transmitted to the seal company.

This must first be published in a public newspaper and periodical, and you can apply online and submit the following information:

Newspaper with a declaration of loss; 2.A copy of your personal ID card; Fill out the application form (information such as name, certificate name, specialty, level, and certificate number).

After passing the review, bring the color ID photo to the issuing unit to reissue the qualification certificate.

If a registered constructor loses his registration certificate or practice seal, he or she shall apply to the provincial construction department for reissuance and submit the following materials:

1. One copy of the Application Form for the Replacement or Defaced Replacement of the Registration Certificate and Practice Seal of the Class 1 Registered Constructor (printed after the successful online declaration);

2. Original identity certificate (returned after acceptance) and photocopy;

3. The original statement of loss published in newspapers at or above the provincial level.

If the certificate of a first-class registered constructor is lost, it shall apply to the provincial construction department for reissuance, and submit the following materials: (1) Application Form for the Replacement or Defaced Replacement of the Lost or Defaced Registration Certificate of the First-class Registered Constructor and Practice Seal (2) A copy of the identity certificate; 3) The original statement of loss published in a newspaper at or above the provincial level.