How to make a homemade range hood? Homemade range hood installation method

Motors are equipped with wind wheels or directly modified with exhaust fans, and these devices are used to suction fumes.

Fuselage (generally use a metal shell to wrap the wind wheel exhaust fan to prevent oil smoke from spreading everywhere).

Attach to the wall with a bracket.

Connect the smoke exhaust pipe to exhaust the fumes to the place you want to discharge.

The DIY smoke machine is made.

A homemade range hood can save a lot of money for the family, and it can exercise hands-on ability.

Homemade range hoods are a common and affordable method, especially if residential space is limited or a terrestrial conventional range hood cannot be installed. The following is the installation method of the homemade range hood:

1.Determine the right installation location: Install a homemade range hood on the wall or ceiling of the kitchen, which usually requires choosing a position about 60-70cm above the cooktop. In addition, issues such as nearby power lines and gas pipelines need to be taken into account.

2.Prepare materials and tools: You need to prepare some materials and tools, including drills, vacuum cleaners, cutters, etc., to ensure that the materials are of reliable quality and high safety, and avoid potential safety hazards.

3.Install the duct: Choose the appropriate diameter of the duct, install the duct along the wall or ceiling, and fix it with a metal clamp to avoid leakage and undesirable problems.

4.Install the fan: fix the fan on the air duct, fix it with screws, and ensure that it is tightly connected with the air duct to avoid air leakage.

5.Install the oil return port: Fix the special oil return port to the top of the oven so that the oil fumes flow back from the chimney back to the cooktop, and also install a sealing ring to prevent oil fume leakage.

6.Turn on the power supply: connect the power cord of the fan, and test to ensure that the fan works normally and has the ability to absorb oil smoke.

Maintain the range hood, early liquid source and regularly clean the tuyere and the facilities for removing the oil fume to ensure safe and stable work and minimize pollution.

01 First of all, we must find the location of the smoke exhaust outlet, and then determine the height and position of the range hood.

02 The next step is to punch holes, we choose to use 8mm rotors to punch holes, pay attention to the level between the two holes.

03 Then it is to install the expansion screws, and we knock all the expansion screws into the wall.

04 Align the screw holes of the range hood with the expansion screws on the wall, and fix them with screws.

05 The last step, of course, is to install the exhaust pipe in the security office, plug the exhaust pipe into the smoke pipe, and then seal the connection.

Introduction: Although we often install range hoods are called master installation, but understanding some of the installation of range hoods is also conducive to us to better understand the master's professionalism and the quality of installation, let's simply talk about how to install the range hood, what is the height of the range hood installation.

There are several main steps to install a range hood.

First, check whether the equipment is complete before installation and then determine the installation position, then fix the hanging plate of the smoke machine, and hang the smoke machine on the hanging board; Finally, install the smoke exhaust pipe, install the oil cup, and debug the range hood. Although the steps are relatively simple, every detail needs to be taken care of.

Generally, the height of range hood installation is installed directly above the stove and on the same axis line of the cooker, and should maintain the level of the left, front and rear positions, the distance from the bottom end of the range hood to the cooktop should be 650 750mm (the side suction type can be appropriately reduced (200 400mm), should be determined according to the specific use), the range hood should not be installed in a place with large air convection, and the approximate position can be drawn on the wall with a pencil when installing.

There are many things that need to be paid attention to when installing the range hood, such as the kitchen is in a state of decoration, so do not expose the range hood; Do not install the range hood on the wall of wood or other flammable materials; Do not install the range hood on the upper part of the stove that uses solid fuel; Do not make the range hood and other gas appliances (such as: gas water heater, etc.) share the same flue, etc., when the master installs, you can also pay more attention to see if there are any problems.

1. The smoke of the range hood is stuffy and abnormal, it may be that the filter screen of the range hood is blocked, you can disassemble the range hood, clean the filter, and install it after the rent is not washed.

2. The abnormal smoking of the range hood may be due to the blockage of the fan of the range hood, you can disassemble the range hood, clean the fan, and install it after cleaning.

3. The abnormal smoking of the range hood may be due to the blockage of the oil pipe of the range hood, you can disassemble the range hood, clean the oil pipe, and install it after cleaning.

4. The abnormal smoking of the range hood may be due to the failure of the circuit board of the range hood, you can disassemble the range hood, check the circuit board, if there are damaged parts, you can replace the new circuit board, and then install it after the replacement is completed.

How to use a range hood:

1. The range hood can not be turned on and stopped from time to time, as long as the cooking is started, it should be turned on until the whole cooking is over, and then 5 or 6 minutes have passed, and then it will be turned off.

2. Turn on the power first, and then turn on the lights.

3. The power of the bulb should be less than 40 watts to ensure the stability of the motor power.

4. When the amount of oil in the oil cup exceeds 2 3, it should be removed and cleaned.

5. Before replacing the bulb and cleaning the range hood, unplug and cut off the power supply.

Introduction: There are three types of range hoods: thin, deep and cabinet. If you are working in a small restaurant kitchen, you can use a slim machine.

Range hoods are generally divided into Chinese range hoods and European range hoods, Chinese range hoods are about cheaper than European range hoods, but European range hoods are diverse and beautiful, and hotel kitchen decoration should pay attention to cost performance when choosing range hoods.

Most of the Chinese range hoods are deep machines, and it is recommended to choose a power of about 185 watts. The range hood of the deep machine is equipped with a deep smoke hood, which can accommodate the smoke that has not been pumped away during work, so as to avoid the phenomenon of a large amount of oil smoke diffusion.

The meaning of each icon:

How to use the dismantling calendar potato hood:

Plug the power plug into a three-pin power outlet with a grounding device.

1) In the shutdown state, press the "strong" and "weak" keys to start the smoke machine, running in the strong wind and weak wind state, and the "strong" and "weak" keys have interlock function.

2) The "Light" button is used to control the light individually, press the light to turn on once, and then press the light to turn off.

3) In the boot state, press the "off" button to stop the smoke machine in the running state.

Summary. <>

Dear, hello, I'm glad that your question can be made a range hood, to help you find the following answers: self-made range hood as long as the tool raw materials are enough, then it is actually feasible, but considering that because there is no factory professional production equipment, the appearance of the product will not keep up and consume more time and energy.

Can you make a range hood.

Dear, hello, I'm glad that your question can be made a range hood, to help you find the following answers: self-made range hood as long as the tool raw materials are enough, then it is actually feasible, but considering that because there is no factory professional production equipment, the appearance of the product will not keep up and consume more time and energy.

Dear, can you make a range hood, as long as the tools and raw materials are enough, then it is actually feasible, but considering that because there is no factory professional production equipment, the appearance of the product will not keep up and it will take a lot of time and energy.

Range hood, also known as range hood, is a kitchen appliance that purifies the kitchen environment. It is installed above the kitchen stove, which can quickly extract the waste burned by the stove and the harmful oil smoke generated in the cooking process and discharge it outside, and at the same time collect the oil smoke condensation, reduce pollution, purify the air, and have the safety guarantee effect of anti-virus and explosion-proof.