Now there is a product called integrated split type oil free cleaning machine , do you know where i

It seems to be a high-tech product produced by Ningbo company.

Our unit bought a really convenient, do not add oil, I used to buy a black cat cleaning machine, I used it for a long time, I forgot to add oil, it was broken, this oil-free cleaning machine is really convenient.

Sounds tall Thanks upstairs for the directions I want to try.

I know that this is a high-tech product that has obtained a national patent, our community bought one, it is particularly convenient and easy to use, and the pressure is also great, the most important thing is not to add oil, which is too convenient, the cleaning machine I bought before, the oil was black after a long time, and it often had to be changed, which was too troublesome.

Yes, this is a kind of "oil-free cleaning machine", its full name is "integrated split oil-free cleaning machine", which is a patented product exclusively produced by Ningbo Huaxun Company.

This is the third generation of piston pump technology, the improvement of the comprehensive performance of this piston pump is subversive, it will comprehensively crush the previous generation of products, and make Chinese enterprises stand at the forefront of the field of piston pump technology for the first time.

The temperature rise of the integrated split oil-free piston pump is very low, which is significantly lower than that of the ordinary piston pump. This is the essential difference with the oil-free air compressor, which is not very suitable for the "oil-free" technology because of the high temperature and easy to fail.

The low temperature rise indicates that the transmission structure is very reasonable, the friction coefficient is small, and the running resistance is small. The principles of mechanical motion are all similar, the simplest and most intuitive judgment; As long as the machine does not produce high temperatures, everything is basically fine.

The excellent mechanical properties of the integrated split oil-free piston pump are innate in the structure;

1. There is no sliding resistance formed by oil seal.

2. There is no movement resistance formed by liquid (engine oil).

3. Rolling friction replaces sliding friction.

The efficiency is higher than that of a regular piston pump, which means that the same motor power can generate more pressure and save more power.

The most common problem of ordinary cleaning machine is the difficulty of starting, especially in winter, it is often necessary to turn the motor blade first, or even heat the oil before starting.

"Due to the extremely light load of the pump, the problem of difficult motor starting, a common problem of ordinary cleaning machines, will never occur.

The working principle of the "integrated split oil-free piston pump" is to use the bearing assembly to play the role of transmission, and there is no need for oil in the crankcase, which is a typical lazy worry-free equipment, which saves labor and maintenance costs, and is more in line with the concept of energy conservation and environmental protection.

The important thing is that there will never be a common fault of various cleaning machines such as "oil leakage", "shaft holding", "cylinder pulling", "oil emulsification whitening", "oil seal wearing" and so on.

Some friends are worried that the bearing will not be soaked by oil, and they are obviously too worried. Bearings are very mature products in industrial applications, provided that the bearing matching should be scientific and the radial load calculation should be accurate. And unlike the "oil-free air compressor", the oil-free cleaning machine will not produce high temperature at all, and there will be no failures of the oil-free air compressor at all.

The main water seal of the integrated split type oil-free piston pump is made of PTFE + polyetheretherketone, which has the lowest friction coefficient among solid materials, which not only does not hurt the plunger, but also forms a protective film, which is smoother and smoother the more you use it, and has a service life of up to 2000 hours.

Due to the physical characteristics of PTFE material with high temperature resistance and corrosion resistance, as long as it is equipped with the corresponding high-pressure gun and high-pressure pipe, it can be competent for high-temperature water and caustic water flushing, and easily cope with various complex working conditions.

The bearing of the ordinary piston pump is an interference fit (commonly known as tight fit), and when the equipment is maintained, whether it is disassembled or installed, it needs to be beaten with a hammer, which is particularly laborious.

The so-called "integrated split crankcase structure" refers to the cutting of a cut in the bearing hole of the crankcase, and the crankcase is still a whole, and its structural strength, especially the dimensional tolerance.

Hello friend.

I think it's generalized, don't believe it too easily, it's not that powerful, good luck.

I know that this oil-free cleaning machine is a patented product produced by Ningbo Huaxun Company, which does not require oil, and has three water seals, one more than an ordinary cleaning machine, which does have great advantages, but their first-generation products are relatively noisy, not very good, and the optimized second-generation oil-free cleaning is very good, and the noise is much smaller than that of ordinary cleaning machines.

It's very easy to use, three of the three in my store are the second-generation oil-free cleaning machines of Huaxun Company, and one of them will be replaced with this oil-free cleaning machine immediately, I suspect that you have not used it upstairs? I'm afraid it's a professional troll.

Yes, there are indeed three water seals, one main water seal, two secondary water seals, I have used it in the car wash for more than a year, no one has ever cared about it, there is nothing wrong. Now all the cars on our street are bought with this kind of car wash.

1. The cleaning machine used in automobile maintenance, whatever you wash, as long as there is oil stain.

2. Oil-free cleaning has an ultrasonic washing method, which can clean some accessories or oil dirt on the body even in the car.

First, the floor heating cleaning machine must use an air pump.

Second, the equipment required for geothermal cleaning.

1. One air compressor (self-configured): It is recommended to use an air pump with a gas storage tank of 30-40 liters, and a large volume air storage tank can make the air compressor have more shutdown and heat dissipation time and prolong the service life of the air pump.

2. A fully automatic physical pulse geothermal cleaning machine: the main equipment for floor heating cleaning, which can combine air and water and work under the control of a microcomputer controller.

3. Four connecting pipes: pulse output pipe, air inlet pipe, water inlet pipe and sewage pipe.

4. A variety of specifications of interface: suitable for different water separator connection diameters.

Third, geothermal cleaning construction procedures.

a. Connection. 1. Close the inlet and return water separation valves of the geothermal main road to relieve the residual pressure inside the geothermal system;

2. Use the pulse output pipe to connect the inlet water of the floor heating cleaning machine and the water separator;

3. Use the water inlet pipe to connect the water source with the water inlet of the pulse floor heating cleaning machine;

4. The interface end of the sewage pipe is connected to the return water of the water separator, and the other end is inserted into the sewage buffer device.

b. Start and clean.

1. Connect the power supply of the air compressor and the pulse geothermal cleaner, and start the compressor to make it work to 5-7 pressures;

2. Turn on the gas source first, and then turn on the water source;

3. Clean for the first time. Start the floor heating cleaning machine to start the first cleaning (please follow the operation rules of opening the next road first, and then closing the next road), the first cleaning is mainly to beat out the residual water in the geothermal pipe, and at the same time check whether the geothermal pipeline is blocked. In the first cleaning, attention should be paid to controlling the air inlet speed, observing the water level of the buffer, and preventing pollution caused by the overflow of the buffer.

4. For the second cleaning, restart the geothermal cleaning machine and clean it one by one according to the newly set frequency; The third wash can be adjusted to a lower value, changing the frequency and wavelength until you see clean water.