How to properly clean epoxy flooring with a walk behind floor scrubber

How should the walk-behind type operate when cleaning epoxy flooring?

1. Clean up the garbage.

Sweeping the epoxy floor, especially the larger garbage, will affect the effect of floor scrubbing, and it needs to be cleaned in time.

2. Pour in clean water.

According to the cleaning area, inject an appropriate amount of clean water into the clean water tank of the floor scrubber, and add an appropriate amount of industrial low-foam cleaning agent according to the degree of oil stain on the ground, and add an appropriate amount of defoamer if necessary.

3. Turn on the switch.

Put down the brush plate, unscrew the key, open the brush plate and water absorption switch, and adjust the amount of water appropriately.

4. Clean at a uniform speed.

At this time, the floor scrubber can be pushed to clean the epoxy floor floor at a uniform speed.

5. Turn off the switch.

When the job is done, turn off the brush switch, lift it up, then turn off the suction switch, and then turn off the key switch.

6. Rinse with water.

Push the floor scrubber to safety, drain the sewage, drain the clean water and rinse.

7. Dry and place.

Leave the scrubber dry and place in a safe and dry place.

1: Epoxy flooring is easily scratched by hard objects, so when using a walk-behind floor scrubber to clean the floor, you need to use a fine soft brush disc and a cleaning pad.

2: Before using a walk-behind floor scrubber to clean, ensure that the ground is free of sand and small stones, so as to avoid irreversible wear and tear on the ground caused by hard sand particles under the pressure of the brush plate.

3: When the epoxy floor is oily, it is necessary to use detergent to assist the floor scrubber for cleaning, but pay attention to the appropriate adjustment of the pressure of the brush to protect the ground when cleaning.

4: After the hand-pushed floor scrubber is cleaned, the absorbent squeegee and brush plate should be cleaned, the sewage and the remaining detergent should be poured out and rinsed and dried, and then put it away and charge.

Floor scrubbers are used in epoxy floors, heavy oily floors, and floor scrubbers for cleaning effect.

Materials required: Tim Ke floor scrubber, clean water.

Steps for self-cleaning of Timco floor scrubber:

1. First of all, ensure that the amount of water in the water tank is sufficient, and pour the sewage bucket when you are cautious, and the battery shows more than 20% of the power, you can recover the base.

2. Click the self-cleaning button to start cleaning.

The pain points of floor scrubbers:

1. After using it for a period of time, the floor scrubber has a peculiar smell.

The floor scrubber needs to clean all kinds of stains, and it is okay to use it at first, but it will emit odors after accumulating after half a year of use. After careful inspection, it was found that the most odorous ** should be the sewage pipe, followed by the pin roller brush and sewage tank.

2. It's a bit laborious to use.

The floor scrubber on the market weighs about 5kg after adding water, which is much heavier than a handheld vacuum cleaner. It's not a big problem for me to use it as a man, but the floor scrubber at home is the most used by my lover, and she sometimes complains that the floor scrubber is heavier and a little laborious to push.

3. The cleaning of the floor scrubber itself is more wasteful.

It is indeed convenient for the floor scrubber to clean the stains, but it is necessary to clean the sewage tank, roller brush, and sewage pipe after use. If you only use it once a day or even once a week, that's acceptable. If you are like my lover, you like to use a floor scrubber to clean up when you see a little stain on the ground, I don't know how many times you have to use it a day, if you dismantle the sewage tank every time, and the roller brush is too troublesome to clean and dry, but if you don't clean it up in time, there will be a peculiar smell, a dilemma.

First, the use of hand-pushed floor scrubber, to have an understanding of the whole machine, and the brush plate and absorbent squeegee should be installed correctly, and at the same time to learn to use various switches.

Second, when the power is in 2 to 3 grids, the machine must be charged first, and then the cleaning work is carried out when the machine is fully charged, so that the cleaning efficiency is higher and the cleaning effect is better.

3. After the sewage tank is full, the motor will automatically shut down, at this time, the sewage must be treated in time, the clean water tank must be reinstalled, and then continue the cleaning work.

All in all, the floor scrubber must be familiar with the correct operation method when cleaning the ground, and the choice of the floor scrubber should be based on the actual situation of the ground and according to their own needs. Before choosing, it is best to have a relevant understanding of him, so that you will not make a choice when choosing.

The floor scrubber is also called the floor cleaning machine, the floor scrubber dryer. It is a cleaning machine suitable for cleaning hard floors while sucking up sewage and taking it away from the site. It has the advantages of environmental protection, energy saving and high performance.

It is suitable for use in stations, docks, airports, workshops, warehouses, schools, hospitals, restaurants, stores and other places with wide hard floors.

1. Fill the clean water tank: open the water tank of the floor scrubber, inject clean water into the clean water tank, and add an appropriate amount of detergent, which can be injected according to the dirtiness of the cleaning environment, and then cover the water tank tightly;

2. Actual operation of the floor scrubber: open the key of the floor scrubber, lightly step on the brush plate pedal, put down the brush plate and the water absorption squeeze, press the brush plate and water absorption switch, adjust the amount of water according to the degree of dirtiness of the ground, and adjust the speed of the floor scrubber;

3. After the cleaning is completed: first close the brush button, step on the brush pedal, lift the brush plate, and then when the water absorption squeegee absorbs all the water on the ground, then turn off the water absorption motor button, and then close the floor scrubber key after all the machine functions are stopped;

4. Clean and clean the sewage tank: open the lid of the water tank, discharge the sewage and clean water, and then rinse the residue and filter screen inside the sewage tank with clean water.

The floor scrubber has a high cleaning efficiency and a good cleaning effect. Each floor scrubber can clean more than 3,000 square meters of hard ground per hour, which is equivalent to the work efficiency of more than a dozen people, so the floor cleaning work of the floor scrubber is very efficient. And the cleaning effect of the floor scrubber should be better.